GPS+GSM Active Antenna Module-Screw mount plus adhesive tape. APAMS-106 RoHS/RoHS II compliant Lead in copper alloy exemption (6c); and Lead in glass exemption (7c-I) Ø75 x 14.1mm MSL level: Not Applicable FEATURES: • Dual Band • High Reliability/Sensitivity • Compact Size, Easy to install • ROHS Compliant TYPICAL APPLICATIONS: • GPS navigation • Vehicle tracking • Telemetry Applications • Asset tracking • Emergency call systems STANDARD SPECIFICATIONS: Antenna Parameters Center Frequency Bandwidth VSWR Polarization Model Impedance Gain Operating Temperature Storage Temperature Min. 1574.40 10.0 Typ. 1575.42 Max. 1576.44 Units MHz MHz Note 1.5:1 (Right Hand Circular Polarization) RHCP 50 5 -40 -45 +80 +85 Ω dBic ˚C ˚C (Based on 70× 70mm ground plane) Low Noise Amplifier (LNA) Parameters Center Frequency DC Voltage Gain Output VSWR Noise Figure DC current Min. 1574.40 2.5 25 Typ. 1575.42 3.0 26 10.5 Max. 1576.44 3.5 28 2.0 1.5 12.5 Units MHz Note dB (Without cable +25°C± 10°C) Max. 960 1880 -1 1 2:1 Units V mA (+25°C ± 10°C) Electrical Characteristics (GSM) Parameters Working Frequency Peak Gain VSWR Impedance Azimuth Polarization ABRACON IS ISO9001:2008 CERTIFIED CERTIFIED Min. 806 1710 Typ. 50 Omni-Directional Linear Polarization Note MHz dBi (@900MHZ) (@1800MHZ) Ω Visit www.abracon.com forTerms & Conditions of Sale Revised: 10.23.14 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com GPS+GSM Active Antenna Module-Screw mount plus adhesive tape. APAMS-106 RoHS/RoHS II compliant Lead in copper alloy exemption (6c); and Lead in glass exemption (7c-I) Ø75 x 14.1mm ANTENNA’S IMPEDANCE AND RETURN-LOSS CHARACTERISTICS S11: Input VSWR Test condition: 27x27mm ground LNA REFLECTION PROFILE S21: LNA Gain Test condition: DC 3.0V OUTLINE DRAWING: Golden SMA Connected to GSM Antenna Silver SMA Connected to GPS Antenna Bottom View ABRACON IS ISO9001:2008 CERTIFIED CERTIFIED Top View Parameters L1(Cable1 Length) L2(Cable2 Length) Antenna PCB GPS RF Connector GSM RF Connector Shielding Thickness Mounting Type Description 200±10cm 200±10cm Dielectric Ceramics FR4 Silver SMA-J3 Golden SMA-J3 Tinplate 15mm Screw Mount plus Adhesive Tape Unit:mm Visit www.abracon.com forTerms & Conditions of Sale Revised: 10.23.14 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com GPS+GSM Active Antenna Module-Screw mount plus adhesive tape. APAMS-106 RoHS/RoHS II compliant Lead in copper alloy exemption (6c); and Lead in glass exemption (7c-I) Ø75 x 14.1mm PRODUCT IMAGE: PACKAGING: Each 450 x 400 x 300mm size carton includes 60 pieces of antenna CAUTION: (1) Do not apply excess mechanical stress to the component body or terminations. Do not attempt to re-form or bend the components as this will cause damage to the component. (2) Do not expose the component to open flame. (3) This specification applies to the functionality of the component as a single unit. Please insure the component is thoroughly evaluated in the application circuit. ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information. ABRACON IS ISO9001:2008 CERTIFIED CERTIFIED Visit www.abracon.com forTerms & Conditions of Sale Revised: 10.23.14 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com