SMD Multilayer Chip Varistor AMCV-0805 RoHS Compliant FEATURES: • SMD type, small size suitable for high density mounting • Excellent clamping ratio and strong capability of voltage surge suppression • Excellent solderability (Ni, Sn plating) 1.0 . x 0.5 x 0.5 mm APPLICATIONS: • Transient voltage protection and voltage surge suppression for LED lighting • Suitable for LCD-TV, STB, Switch, Router, PLC, Security System, smart meters, mobile phones • Suppressing Induced / switching over-voltage caused by lightning and power • Protecting DC-DC Module, I/O ports, IC driver STANDARD SPECIFICATIONS: Operating Temperature: -55˚C ~ +125˚C Storage Temperature: -10˚C ~ +40˚C and RH 70% (Max.) Part Number Max. Working Voltage Varistor Voltage Max. Clamping Voltage Rated Single Pulse Transient Typical Capacitance @1mA DC 8/20μs ESD Energy 10/1000μs Units Symbol AMCV-0805-5R5-C180 <20μA AC DC RMS Volts Volts VWDC VWAC 5.5 4.0 Volts VB 10.0-14.0 Volts VC*1 18 Volts VC*2 23 Joules ET 0.005 Peak Current 8/20μs Amps IP 3 AMCV-0805-180-C101 18.0 12.7 22.0-28.0 40 48 0.05 20 100 AMCV-0805-260-C800 26.0 18.4 31.0-38.0 58 70 0.05 20 80 AMCV-0805-300-C500 30.0 21.3 37.0-46.0 65 78 0.05 15 50 Test Condition @0.5Vrms, 1MHz pF C 18 *1: Vc, Maximum peak voltage across the varistor measured at a specified pulse current and waveform. Energy Rating Pulse & Waveform 0.00- 0.05 Joule 1A, 8/20μs 0.10 Joule 2A, 8/20μs 0.20-0.50 Joule 5A, 8/20μs *2: Vc, Maximum peak voltage across the varistor measured at 30ns after initiation of pulse on IEC61000-4-2 30A/8KV. Test Conditions Unless otherwise specified, the standard atmospheric conditions for measurement/test as: a. Ambient Temperature: 20±15°C b. Relative Humidity: 65±20% c. Air Pressure: 86 kPa to 106 kPa Items Test Methods and Remarks Varistor Voltage at 1mA DC (VB) Measuring current: 1mA DC Duration: 0.2 to 2 sec Capacitance (C) Measure source: 0.5 VRMS Test frequency: 1MHz. Leakage Current (IL) Measuring voltage: Maximum DC working voltage Clamping Voltage (VC) Measuring source: 8/20us waveform, ESD waveform ABRACON IS ISOISO 9001 / QS 9000 9001:2008 CERTIFIED LLC 2 Faraday, Suite# B | Irvine | CA 92618 Revised: 04.30.15 Ph. 949.546.8000 | Fax. 949.546.8001 Visit www.abracon.com for Terms and Conditions of Sale SMD Multilayer Chip Varistor AMCV-0805 RoHS 1.0 . x 0.5 x 0.5 mm Compliant OPTIONS AND PART IDENTIFICATION: AMCV-0805- -C Capacitance Code Please refer to the table above Voltage Code Please refer to the table above - Tolerance N=±30% Packaging T: Tape and Reel (4kpcs / reel) OUTLINE DIMENSION: Recommended Land Pattern L 2.0±0.2 9 8] W 1.25±0.2 [0.049±0.008] T 0.85±0.2 [0.033±0.008] a 0.5±0.3 [0.020±0.012] A B C 0.80∼1.20 0.80∼1.20 0.90∼1.60 Materials Side View 1 2 Part Name Base Material Internal Conductor 3 Terminal Electrode Material ZnO Ag-Pd Ag (Inner layer) Ni-Sn (Outer layer) Top View Dimension: mm ABRACON IS ISOISO 9001 / QS 9000 9001:2008 CERTIFIED LLC 2 Faraday, Suite# B | Irvine | CA 92618 Revised: 04.30.15 Ph. 949.546.8000 | Fax. 949.546.8001 Visit www.abracon.com for Terms and Conditions of Sale SMD Multilayer Chip Varistor AMCV-0805 RoHS 1.0 . x 0.5 x 0.5 mm Compliant REFLOW PROFILE: Preheat Condition Allowed time above 217 ˚C Max temperature Max time at max temperature Solder paste Allowed Reflow time 150 to 200 ˚C; 60 to 120 sec. 60 to 90 sec. 260 ˚C 10 sec. Sn/3.0Ag/0.5Cu 2x max. TAPE & REEL: T: 4,000pcs / reel A B P T (max) 1.5±0.2 2.3±0.2 4.0±0.1 1.1 9.0±1.5mm Storage Conditions a. The solderability of the external electrode may be deteriorated if packages are stored where they are exposed to high humidit y Package must be stored at 40oC or less and 70% RH or less. b. The solderability of the external electrode may be deteriorated if packages are stored where they are exposed to dust of harmful gas (e.g. HCI, sulfurous gas of H2S). c. Packaging material may be deformed if package are stored where they are exposed to heat of direct sunlight. d. Solderability shall be guaranteed for 6 months from the date of delivery on condition that they are stored at the environment specified in a..The parts that are stored more than 6 months shall be checked solderability before use. Dimension: mm ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information. ABRACON IS ISOISO 9001 / QS 9000 9001:2008 CERTIFIED LLC 2 Faraday, Suite# B | Irvine | CA 92618 Revised: 04.30.15 Ph. 949.546.8000 | Fax. 949.546.8001 Visit www.abracon.com for Terms and Conditions of Sale