ULTRA LOW NOISE POWER SUPPLY MODULE ABPSM-ULN-A Pb RoHS Compliant | | | | | | | | | | | | | | | FEATURES: APPLICATIONS: • AC Adapter Input Voltage 100VAC to240VAC; 50Hz and 60Hz cycles • Lab Grade Power Supply designed to replace bulky & noisy power • • • • • • • • – World Wide Capability supplies for everyday use Four DC Output Ports, 1.8V, 2.5V 3.3V & 5.0V • A must have for Noise Sensitive Measurements such as, S/N ratio, Current Sourcing Capability 200mA max each port Spectral Purity, Jitter, Phase Noise & Harmonic Distortion Exceptional low noise density; < 7nV / √Hz @ 1kHz offset Typical • Ideal for testing circuits including: Better than 0.30µVrms over 0.1Hz to 1kHz bandwidth (best-in-class) - Audio - Medical Diagnostic Convenient, Ultra Low Noise Solution offering most common bias levels - RF - Jitter Sensitive Digital Portable - Small form factor [3.50” * 1.50” * 0.65”] Machined Aluminum enclosure - Microwave No external heat sinking is required Low Cost STANDARD SPECIFICATIONS: Parameter Description Value / Units (max) Nominal Voltages +1.8V, +2.5V, +3.3V, +5.0V Voltage Accuracy Initial accuracy at T=25ºC < ±0.25% T=0 ºC to T=+70 ºC < ±0.30% Maximum Output Current T=25 ºC 200mA Load Regulation Δ Load = 1mA to 200mA 5mV Output Impedance Max. Output Impedance @ each port 0.20 Ω Voltage Output Noise Noise Density @100Hz 80 nV / √Hz Noise Density @1kHz 25 nV / √Hz Noise Density @10kHz 20 nV / √Hz OUTLINE DIMENSIONS: ABRACON IS IS ABRACON ISO9001:2008 CERTIFIED RTIFIED CE Visit www.abracon.com for Terms & Conditions of Sale Revised: 10.07.10 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com ULTRA LOW NOISE POWER SUPPLY MODULE ABPSM-ULN-A Pb RoHS Compliant | | | | | | | | | | | | | | | TYPICAL PERFORMANCE CURVES - LOW FREQUENCY NOISE ABRACON IS IS ABRACON ISO9001:2008 CERTIFIED RTIFIED CE Visit www.abracon.com for Terms & Conditions of Sale Revised: 10.07.10 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com ULTRA LOW NOISE POWER SUPPLY MODULE ABPSM-ULN-A Pb RoHS Compliant | | | | | | | | | | | | | | | LOW FREQUENCY NOISE DENSITY PROFILE PRODUCT SUMMARY • ABPSM-ULN-A Power Supply Module is designed to aid engineers seeking ultra clean power source for bench testing • Ideally suited for Audio, RF, DDS, µWave circuits and product testing • Low cost, small form-factor solution – can be incorporated on production lines for final testing of electronic products • Eliminates noise-contribution-uncertainty from the power source; during design characterization, design validation, product testing in both design & production environment • A must have to test VCOs, Crystal Oscillators, PLL Synthesizers, Mixers, Amplifiers and any sub-circuit requiring ultra clean power source • A low cost replacement for expensive Power Supply solutions, while offering superior noise performance • Abracon is currently designing single-channel-board-level solutions that can be incorporated in customer designs to bias noise sensitive circuitry. Please contact Abracon for further details. ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information. ABRACON IS IS ABRACON ISO9001:2008 CERTIFIED RTIFIED CE Visit www.abracon.com for Terms & Conditions of Sale Revised: 10.07.10 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com