Datasheet

GPS+GLONASS Active Antenna Module - Magnet Base
APAMPG-130
RoHS/RoHS II compliant
Lead in copper alloy exemption (6c); and Lead in glass exemption (7c-I)
ESD Sensitive
MSL level: Not Applicable
44.0 x 14.5mm
| | | | | | | | | | | | | | |
FEATURES:
• High Reliability/ Sensitivity
• Compact Size
• Easy to Install (magnet base)
• ROHS Compliant
TYPICAL APPLICATIONS:
• Automotive Navigation
• Automotive Monitoring
• Personal Tracking
STANDARD SPECIFICATIONS:
Antenna
Parameters
Frequency Range
Bandwidth
Min.
1572.42
1594
8.0
16.0
Max.
1578.42
1610
Units
MHz
MHz
MHz
MHz
Note
(For GPS)
(For GLONASS)
(For GPS)
(For GLONASS)
1.5:1
VSWR at Center Frequency
Polarization Model
Impedance
Gain
Operating Temperature
Storage Temperature
Typ.
1575.42
1602
(Right Hand Circular Polarization)
RHCP
50
5
-40
-45
Ω
dBi
˚C
˚C
+80
+85
(Based on 70× 70mm ground plane)
Low Noise Amplifier (LNA)
Parameters
Frequency Range
DC Voltage
Gain
Output VSWR
Noise Figure
DC current
Out-Band Rejection
Min.
1572
2.8
20
25
Typ.
1595
30
13.5
Max.
1618
5.0
2.0
1.5
Units
MHz
Note
dB
(without cable +25°C ± 10°C)
mA
dB
dB
(+25°C ± 10°C)
(At 3.0V)
(fo+100MHz)
(fo-100MHz)
V
Overall (Complete Module including RF Connector)
Parameters
Frequency Range
Output V.W.S.R
Impedance
Peak Gain
Operating Temperature
Storage Temperature
ABRACON IS
ISO9001:2008
CERTIFIED
CERTIFIED
Min.
1572
Typ.
1595
50
-40
-45
Max.
1618
Units
MHz
30
+80
+85
Ω
dBic
˚C
˚C
2.0
Note
Visit www.abracon.com forTerms & Conditions of Sale Revised:
10.30.14
30332 Esperanza, Rancho Santa Margarita, California 92688
tel 949-546-8000 | fax 949-546-8001 | www.abracon.com
GPS+GLONASS Active Antenna Module - Magnet Base
APAMPG-130
ESD Sensitive
RoHS/RoHS II compliant
Lead in copper alloy exemption (6c); and Lead in glass exemption (7c-I)
44.0 x 14.5mm
| | | | | | | | | | | | | | |
TEST CONDITIONS & TEST SETUP:
Antenna’s Impedance and Return-Loss Characteristics
LNA Reflection Profile
S11: Input VSWR
S21: LNA Gain
Test condition: DC 3.0V
Test condition: 27x27mm ground
OUTLINE DIMENSION:
Bottom View
Side View
Top View
Parameters
L (Cable1 Length)
RF Cable Attenuation
Antenna
PCB
RF Connector
Shielding
Thickness
Mounting Type
ABRACON IS
ISO9001:2008
CERTIFIED
CERTIFIED
Description
400±10cm
1.3dB/m
Dielectric Ceramics
FR4
SMA-J3
Tinplate
15.5mm
Magnet Base
Unit: mm
Visit www.abracon.com forTerms & Conditions of Sale Revised:
10.30.14
30332 Esperanza, Rancho Santa Margarita, California 92688
tel 949-546-8000 | fax 949-546-8001 | www.abracon.com
GPS+GLONASS Active Antenna Module - Magnet Base
APAMPG-130
ESD Sensitive
RoHS/RoHS II compliant
Lead in copper alloy exemption (6c); and Lead in glass exemption (7c-I)
44.0 x 14.5mm
| | | | | | | | | | | | | | |
PRODUCT IMAGE:
PACKAGING:
Each 630 x 460 x 105mm size carton includes 100 pieces of antenna
CAUTION:
(1) Do not apply excess mechanical stress to the component body or terminations. Do not attempt to re-form or bend the components as this will cause
damage to the component.
(2) Do not expose the component to open flame.
(3) This specification applies to the functionality of the component as a single unit. Please insure the component is thoroughly evaluated in the application
circuit.
ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where
component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and
authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information.
ABRACON IS
ISO9001:2008
CERTIFIED
CERTIFIED
Visit www.abracon.com forTerms & Conditions of Sale Revised:
10.30.14
30332 Esperanza, Rancho Santa Margarita, California 92688
tel 949-546-8000 | fax 949-546-8001 | www.abracon.com