GPS+GLONASS Active Antenna Module - Adhesive Mount APAMPG-117 RoHS/RoHS II compliant Lead in copper alloy exemption (6c); and Lead in glass exemption (7c-I) MSL level: Not Applicable 44.0 x 14.5mm | | | | | | | | | | | | | | | FEATURES: • High Reliability/ Sensitivity • Compact Size • Easy to Install (adhesive tape) • ROHS Compliant TYPICAL APPLICATIONS: • Automotive Navigation • Automotive Monitoring • Personal Tracking STANDARD SPECIFICATIONS: Antenna Parameters Frequency Range Bandwidth Min. 1572.42 1594 8.0 16.0 Max. 1578.42 1610 Units MHz MHz MHz MHz Note (For GPS) (For GLONASS) (For GPS) (For GLONASS) 1.5:1 VSWR at Center Frequency Polarization Model Impedance Gain Operating Temperature Storage Temperature Typ. 1575.42 1602 (Right Hand Circular Polarization) RHCP 50 5 -40 -45 Ω dBi ˚C ˚C +80 +85 (Based on 70× 70mm ground plane) Low Noise Amplifier (LNA) Parameters Frequency Range DC Voltage Gain Output VSWR Noise Figure DC current Out-Band Rejection Min. 1572 2.8 20 25 Typ. 1595 30 13.5 Max. 1618 5.0 2.0 1.5 Units MHz Note dB (without cable +25°C ± 10°C) mA dB dB (+25°C ± 10°C) (At 3.0V) (fo+100MHz) (fo-100MHz) V Overall (Complete Module including RF Connector) Parameters Frequency Range Output V.W.S.R Impedance Peak Gain Operating Temperature Storage Temperature ABRACON IS ISO9001:2008 CERTIFIED CERTIFIED Min. 1572 Typ. 1595 50 -40 -45 Max. 1618 Units MHz 30 +80 +85 Ω dBic ˚C ˚C 2.0 Note Visit www.abracon.com forTerms & Conditions of Sale Revised: 10.28.14 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com GPS+GLONASS Active Antenna Module - Adhesive Mount APAMPG-117 RoHS/RoHS II compliant Lead in copper alloy exemption (6c); and Lead in glass exemption (7c-I) 44.0 x 14.5mm | | | | | | | | | | | | | | | TEST CONDITIONS & TEST SETUP: Antenna’s Impedance and Return-Loss Characteristics LNA Reflection Profile S11: Input VSWR S21: LNA Gain Test condition: DC 3.0V Test condition: 27x27mm ground OUTLINE DIMENSION: Bottom View Side View Top View Parameters L (Cable1 Length) RF Cable Attenuation Antenna PCB RF Connector Shielding Thickness Mounting Type ABRACON IS ISO9001:2008 CERTIFIED CERTIFIED Description 400±10cm 1.3dB/m Dielectric Ceramics FR4 SMA-J3 Tinplate 15.5mm Adhesive Tape Unit: mm Visit www.abracon.com forTerms & Conditions of Sale Revised: 10.28.14 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com GPS+GLONASS Active Antenna Module - Adhesive Mount APAMPG-117 RoHS/RoHS II compliant Lead in copper alloy exemption (6c); and Lead in glass exemption (7c-I) 44.0 x 14.5mm | | | | | | | | | | | | | | | PRODUCT IMAGE: PACKAGING: Each 630 x 460 x 105mm size carton includes 100 pieces of antenna CAUTION: (1) Do not apply excess mechanical stress to the component body or terminations. Do not attempt to re-form or bend the components as this will cause damage to the component. (2) Do not expose the component to open flame. (3) This specification applies to the functionality of the component as a single unit. Please insure the component is thoroughly evaluated in the application circuit. ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information. ABRACON IS ISO9001:2008 CERTIFIED CERTIFIED Visit www.abracon.com forTerms & Conditions of Sale Revised: 10.28.14 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com