UNSHIELDED SMD POWER INDUCTOR AISC-2220H RoHS MSL level: 1 Compliant FEATURES: APPLICATIONS: • Excellent solderability and low DC resistance • High current capacity • Suitable for using as a choke in DC power supply circuits • Cell phones • High frequency communication products • PCs, Disk Drives and Computer Peripherals 5.7 x 5.0 x 4.7mm | | | | | | | | | | | | | | | STANDARD SPECIFICATIONS: PARAMETERS ABRACON P/N: Operating temperature: Storage temperature: Part Number AISC-2220HInductance Code AISC-2220H-R12 AISC-2220H-R27 AISC-2220H-R47 AISC-2220H-1R0 AISC-2220H-1R5 AISC-2220H-2R2 AISC-2220H-3R3 AISC-2220H-4R7 AISC-2220H-6R8 AISC-2220H-100 AISC-2220H-150 AISC-2220H-220 AISC-2220H-330 AISC-2220H-470 AISC-2220H-680 AISC-2220H-101 AISC-2220H-151 AISC-2220H-221 AISC-2220H-331 AISC-2220H-471 AISC-2220H-681 AISC-2220H-102 AISC-2220H-222 AISC-2220H-472 AISC-2220H-103 AISC-2220H-xxx Series -40°C to + 85°C -40°C to + 85°C, 80% RH max. Inductance Tolerance (uH) 0.12 0.27 0.47 1.0 1.5 2.2 3.3 4.7 6.8 10 15 22 33 47 68 100 150 220 330 470 680 1000 2200 4700 10000 K, M M M M M M M M M M K, M K, M K, M K, M K, M K, M K, M K, M K, M K, M K, M K, M K, M K, M K, M K, M Test Frequency and Voltage 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 10KHz, 0.1V 10KHz, 0.1V 10KHz, 0.1V 10KHz, 0.1V DCR max IDC max SRF min (Ω) 0.0098 0.0140 0.0182 0.0270 0.0310 0.0410 0.0500 0.0574 0.1040 0.1300 0.210 0.266 0.448 0.560 0.938 1.204 2.660 3.360 6.160 7.560 11.34 14.42 30.10 61.04 140.0 (A) 6.000 5.300 4.800 4.000 3.700 3.200 2.900 2.700 2.000 1.700 1.400 1.200 0.900 0.800 0.640 0.560 0.420 0.320 0.270 0.240 0.190 0.150 0.100 0.070 0.050 (MHz) 450 300 200 150 110 80 40 30 25 20 17 15 12 10 7.6 6.5 5.0 4.0 3.1 2.4 1.9 1.7 1.2 0.8 0.5 Test Conditions and Equipment Rated DC Current: The current when the inductance becomes 10% lower than its initial value or the current when the temperature of coil increases by 20°C, whichever is smaller. (Ta=25°C) L&Q: HP4285A Precision LCR meter DCR: Milli-ohm meter ABRACON IS ISOISO 9001 9001:2008 / QS 9000 CERTIFIED Revised: 12.28.12 Visit www.abracon.com for Terms & Conditions of Sale 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000| fax 949-546-8001| www.abracon.com UNSHIELDED SMD POWER INDUCTOR AISC-2220H RoHS Compliant 5.7 x 5.0 x 4.7mm | | | | | | | | | | | | | | | OPTIONS & PART IDENTIFICATION: - AISC-2220H- (Left blank if standard) Inductance Code Tolerance Code Packaging Please refer to Electrical Specification Table K: ± 10% T: 1000 pcs/reel M: ± 20% OUTLINE DIMESIONS: Recommended Land Pattern A B C E F H I J 5.7±0.3 5.0±0.3 4.7±0.5 1.3min. 1.7min. 5.0 2.0 2.0 Dimension: mm REFLOW PROFILE: ABRACON IS ISOISO 9001 9001:2008 / QS 9000 CERTIFIED Revised: 12.28.12 Visit www.abracon.com for Terms & Conditions of Sale 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000| fax 949-546-8001| www.abracon.com UNSHIELDED SMD POWER INDUCTOR AISC-2220H RoHS Compliant 5.7 x 5.0 x 4.7mm | | | | | | | | | | | | | | | TAPE & REEL: T= tape and reel (1,000pcs/reel) W P 16 12 Dimension: mm ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information. ABRACON IS ISOISO 9001 9001:2008 / QS 9000 CERTIFIED Revised: 12.28.12 Visit www.abracon.com for Terms & Conditions of Sale 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000| fax 949-546-8001| www.abracon.com