HIGH CURRENT CERAMIC WIRE WOUND INDUCTORS AISC-0603HP Pb RoHS/RoHS II Compliant 1.80 x 1.12 x 1.02mm | | | | | | | | | | | | | | | FEATURES: APPLICATIONS: • Higher Q and lower DCR than other 0603 inductors • Very high SRF – as high as 8.5 GHz • Excellent current handling capability – up to 2100mA • Wide range of Inductance values available for flexible needs • Tight tolerance of 2% is available. • Widely used in communications applications such as cell phones, cable modems, ADSL, repeaters. • Bluetooth, W-LAN, GPS, Broadband Network • Video cameras, liquid crystal television, and other electronic devices • Suitable for RF circuit ELECTRICAL SPECIFICATIONS: PARAMETERS PARAMETERS ABRACON P/N: AISC-0603HPSeries Operating temperature: -40°C to + 125°C -10ºC to +40ºC, 20% to 70% RH in Tape & Reel Storage temperature: Part Number AISC-0603HPInductance Code Inductance Units Symbol AISC-0603HP-1N7 AISC-0603HP-2N2 AISC-0603HP-3N3 AISC-0603HP-3N6 AISC-0603HP-3N9 AISC-0603HP-4N3 AISC-0603HP-4N7 AISC-0603HP-5N1 AISC-0603HP-6N2 AISC-0603HP-6N8 AISC-0603HP-7N2 AISC-0603HP-7N5 AISC-0603HP-8N2 AISC-0603HP-8N7 AISC-0603HP-9N1 AISC-0603HP-9N5 AISC-0603HP-10N AISC-0603HP-11N AISC-0603HP-12N AISC-0603HP-15N AISC-0603HP-16N AISC-0603HP-18N AISC-0603HP-22N AISC-0603HP-23N AISC-0603HP-24N AISC-0603HP-27N AISC-0603HP-30N AISC-0603HP-33N AISC-0603HP-36N AISC-0603HP-39N AISC-0603HP-43N AISC-0603HP-47N AISC-0603HP-51N AISC-0603HP-56N AISC-0603HP-68N AISC-0603HP-72N nH L 1.7 2.2 3.3 3.6 3.9 4.3 4.7 5.1 6.2 6.8 7.2 7.5 8.2 8.7 9.1 9.5 10 11 12 15 16 18 22 23 24 27 30 33 36 39 43 47 51 56 68 72 ABRACON IS ISO ISO 9001 9001:2008 / QS 9000 CERTIFIED Tolerance Min. Quality Factor L/Q Test Freq. B, S B, S B, S B, S B, S B, S B, S B, J, K B, J, K B, J, K B, J, K B, J, K B, J, K B, J, K J, K J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K Q 24 13 35 35 30 30 22 20 35 35 35 35 35 30 28 35 35 35 35 38 38 38 40 40 40 40 40 40 40 40 40 38 38 38 38 34 MHz Freq. 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 200 200 200 200 150 Typ. Quality Factor @ 250MHz /900MHz 31/50 15/27 37/64 42/67 39/62 40/64 29/50 27/46 44/68 50/79 47/71 46/74 45/69 38/61 35/57 50/76 50/82 54/82 52/80 54/83 53/78 51/71 55/75 55/75 50/66 53/68 55/66 51/55 55/63 55/58 52/53 51/50 50/46 53/46 50/39 50/38 Max. DC Resistance Max. Rated Current Min. Self-resonant Frequency Ω DCR 0.033 0.150 0.035 0.035 0.039 0.045 0.090 0.108 0.050 0.050 0.052 0.070 0.054 0.100 0.108 0.060 0.060 0.060 0.078 0.085 0.085 0.078 0.120 0.120 0.080 0.125 0.130 0.170 0.150 0.180 0.170 0.200 0.250 0.230 0.280 0.350 mA Ir 2100 900 1700 1700 1600 1500 1100 1000 1400 1400 1400 1300 1400 1000 1000 1350 1350 1350 1200 1100 1100 1200 950 950 1100 950 920 680 750 680 810 680 660 700 650 580 MHz S.R.F 8500 7000 6900 6900 6900 6000 5800 5700 5800 5800 4800 4800 4300 4600 4300 5000 4800 4200 4000 4000 3300 3100 3000 2850 2650 2800 2400 2300 2300 2200 2100 2000 1900 1900 1700 1700 Revised: 04.06.13 Visit www.abracon.com for Terms & Conditions of Sale 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000| fax 949-546-8001| www.abracon.com HIGH CURRENT CERAMIC WIRE WOUND INDUCTORS AISC-0603HP Pb RoHS/RoHS II Compliant 1.80 x 1.12 x 1.02mm | | | | | | | | | | | | | | | Part Number AISC-0603HPInductance Code Inductance Units Symbol nH L AISC-0603HP-75N AISC-0603HP-82N AISC-0603HP-91N AISC-0603HP-R10 AISC-0603HP-R11 AISC-0603HP-R12 AISC-0603HP-R15 AISC-0603HP-R18 AISC-0603HP-R20 AISC-0603HP-R21 AISC-0603HP-R22 AISC-0603HP-R25 AISC-0603HP-R27 AISC-0603HP-R30 AISC-0603HP-R33 AISC-0603HP-R36 AISC-0603HP-R39 75 82 91 100 110 120 150 180 200 210 220 250 270 300 330 360 390 Tolerance Min. Quality Factor L/Q Test Freq. - Q MHz Freq. G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K G, J, K 34 34 34 34 33 33 30 28 28 28 28 28 28 28 28 28 28 150 150 150 150 150 150 150 100 100 100 100 100 100 100 100 100 100 Typ. Quality Factor @ 250MHz /900MHz Max. DC Resistance Max. Rated Current Min. Self-resonant Frequency Ω DCR mA Ir MHz S.R.F 46/35 51/36 48/33 52/32 46/29 50/33 46/22 48/20 45/10 48/12 47/16 46/48/44/43/45/43/- 0.42 0.46 0.42 0.54 0.54 0.65 0.82 1.2 1.3 1.9 1.9 2.0 2.2 2.7 2.9 3.8 3.8 550 510 550 470 470 420 390 320 310 280 280 260 260 220 200 180 180 1700 1600 1500 1400 1350 1300 1150 1050 1000 1000 950 900 900 780 750 720 700 Test Conditions 1. Inductance is measured in HP-4287A RF LCR meter with HP-16193 fixture. 2. SRF is measured in ENA E5071B network analyzer 3. RDC is measured in HP-4338B milliohmeter. 4. Definition of Rated Current (Ir): Ir is direct electric current as chip surface temperature rose just 25oC against chip initial surface temperature (Ta) PART NUMBER IDENTIFICATION - AISC-0603HP- Inductance Code Tolerance Code Packaging Please refer to the Table B: ± 0.2nH T: 3kpcs/reel S: ± 0.3nH G: ±2% J: ±5% K: ±10% ABRACON IS ISO ISO 9001 9001:2008 / QS 9000 CERTIFIED Revised: 04.06.13 Visit www.abracon.com for Terms & Conditions of Sale 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000| fax 949-546-8001| www.abracon.com HIGH CURRENT CERAMIC WIRE WOUND INDUCTORS AISC-0603HP Pb RoHS/RoHS II Compliant 1.80 x 1.12 x 1.02mm | | | | | | | | | | | | | | | OUTLINE DIMENSIONS Recommended Land Pattern L 1.80 max W 1.12 max T S W1 t1 1.02 max 0.36 ± 0.10 0.76 ref 0.50 ref A B 1.92 0.64 C 1.27 Dimension: mm ELECTRODE MATERIALS Components 1st Layer 2nd Layer 3rd Layer ABRACON IS ISO ISO 9001 9001:2008 / QS 9000 CERTIFIED Material Ag/Pd Nickel Tin Revised: 04.06.13 Visit www.abracon.com for Terms & Conditions of Sale 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000| fax 949-546-8001| www.abracon.com HIGH CURRENT CERAMIC WIRE WOUND INDUCTORS AISC-0603HP Pb RoHS/RoHS II Compliant 1.80 x 1.12 x 1.02mm | | | | | | | | | | | | | | | REFLOW PROFILE TAPE & REEL: T= tape and reel (3,000pcs/reel) A B F K T W 1.15 1.80 4.00 0.95 0.20 8.00 Dimension: mm Storage period Use the product within 12 months after delivered. Solderability should be checked if this period is exceeded. ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information. ABRACON IS ISO ISO 9001 9001:2008 / QS 9000 CERTIFIED Revised: 04.06.13 Visit www.abracon.com for Terms & Conditions of Sale 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000| fax 949-546-8001| www.abracon.com