JFW Industries, Inc. Phone: 317-887-1340 [email protected] www.jfwindustries.com SPECIFICATION SHEET JFW MODEL 50S-1505 1P2T SOLID STATE RF SWITCH Frequency Range 20-2500 MHz Configuration 1P2T Impedance 50 Ohms nominal VSWR 1.4:1 maximum Insertion Loss 0.3 0.7 0.5 1.0 1.0 1.5 Isolation 50 dB typical 20-1000MHz 45 dB minimum 20-1000MHz dB dB dB dB dB dB typical maximum typical maximum typical maximum 20-1000MHz 20-1000MHz 1000-2000MHz 1000-2000MHz 2000-2500MHz 2000-2500MHz 40 dB typical 1000-2500MHz 35 dB minimum 1000-2500MHz Switching Speed 10 microseconds (50% TTL to 10% or 90% RF) RF Input Power 25 Watts average 200 Watts peak (1usec pulse) Control Logic (1 Line) TTL Low for Common to J1 TTL High for Common to J2 DC Supply +15Vdc @ 325 mA +5Vdc @ 40 mA DC Connector Solder Terminals RF Connector SMA, TNC or N female Operating Temperature Range -20º to +70º C Physical Size See outline drawing 092-3022 ECR/ECN # DATE 07/31/2006 Page 1 of 1 REV APPR / DATE BAC 07/31/2006 ECR/ECN # JFW FORM E-7-F REV F DATE REV APPR / DATE