JFW Industries, Inc. Phone: 317-887-1340 [email protected] www.jfwindustries.com SPECIFICATION SHEET JFW MODEL 50S-1407 1P3T SOLID STATE RF SWITCH Frequency Range 100-500 MHz Configuration 1P3T Impedance 50 Ohms nominal VSWR 1.3:1 maximum Insertion Loss 0.5 dB maximum Isolation 50 dB minimum Switching Speed 40 microseconds (50% TTL to specified isolation) 30 microseconds (50% TTL to -50 dBc ON-OFF) RF Input Power 250 Watts average 500 Watts peak 20 Watts average Cold switch Hot switch Control Logic (3 Lines) (C1 for J1, C2 for J2, C3 for J3) TTL Low for "OFF" and reflective TTL High for "ON" (Only one line can be TTL "High" at a time.) DC Supply +15 Vdc @ 400 mA nominal +5 Vdc @ 80 mA nominal RF Connector SMA, TNC or N female DC Connector solder terminals Operating Temperature Range -20ºC to +70ºC Storage Temperature Range -55ºC to +85ºC Physical Size See outline drawing 092-4704 ECR/ECN # DATE 01/21/2005 Page 1 of 1 REV APPR / DATE ECR/ECN # BAC 01/21/2005 JFW FORM E-7-F REV F DATE REV APPR / DATE