SRF1020CT THRU SRF10200CT R SCHOTTKY BARRIER RECTIFIER Reverse Voltage - 20 to 200 Volts Forward Current - 10.0Amperes S E M I C O N D U C T O R FEATURES ITO-220AB Plastic package has Underwriters Laboratory Flammability Classification 94V-0 Metal silicon junction ,majority carrier conduction Guard ring for overvoltage protection 0.410(10.41) 0.140(3.55) 0.390(9.91) 0.128(3.25) DIA Low power loss ,high efficiency 0.187(4.75) 0.167(4.25) 0.130(3.31) 0.111(2.81) 0.111(2.83) High current capability ,Low forward voltage drop 0.101(2.57) High surge capability 0.138(3.50) 0.130(3.30) For use in low voltage ,high frequency inverters, JF SRF1060CT free wheeling ,and polarity protection applications Dual rectifier construction PIN 2 1 3 1.161(29.5) 0.177(4.50) High temperature soldering guaranteed:260 °C/10 seconds, 0.102(2.60) 0.25"(6.35mm)from case Component in accordance to RoHS 2002/95/EC and 0.551(14.00) 0.067(1.70) 0.059(1.50) 0.056(1.43) 0.043(1.10) WEEE 2002/96/EC 0.110(2.80) 1.083(27.5) 0.138(3.50) 0.512(13.00) 0.029(0.73) MECHANICAL DATA 0.019(0.47) 0.104(2.64) 0.096(2.44) 0.029(0.73) 0.019(0.47) Case: JEDEC ITO-220AB molded plastic body Terminals: Lead solderable per MIL-STD-750,method 2026 Polarity: As marked. Dimensions in inches and (millimeters) Mounting Position: Any Weight: 0.08ounce, 2.24 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (Ratings at 25 C ambient temperature unless otherwise specified ,Single phase ,half wave ,resistive or inductive load. For capacitive load,derate by 20%.) Symbols Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage SRF SRF SRF SRF SRF SRF 1050CT 1060CT 1080CT 10100CT 10150CT 10200CT SRF 1020CT SRF 1030CT SRF 1040CT 20 30 40 50 60 80 14 21 28 35 42 20 30 40 50 60 VRRM VRMS VDC 200 100 150 56 70 105 140 80 100 150 200 Units Volts Volts Volts Per leg Total device I(AV) 5.0 10.0 Amps Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC method) IFSM 150 Amps Maximum average forward rectified current(see Fig.1) Maximum instantaneous forward voltage at 10.0 A(Note 1 ) Maximum instantaneous reverse current at rated DC blocking voltage(Note 1) T A =25 C T A =125 C VF IR Typical thermal resistance (Note 2) R Operating junction temperature range TJ TSTG Storage temperature range Notes: 1.Pulse test: 300 0.60 0.85 0.75 0.90 0.95 0.2 15 50 2.5 JC C/W C -65 to+150 C s pulse width,1% duty cycle 1-96 mA -65 to+150 2.Thermal resistance from junction to case JINAN JINGHENG ELECTRONICS CO., LTD. Volts HTTP://WWW.JINGHENGGROUP.COM RATINGS AND CHARACTERISTIC CURVES SRF1020CT THRU SRF10200CT FIG.2-MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT FIG.1-FORWARD CURRENT DERATING CURVE AVERAGE FORWARD CURRENT AMPERES 10.0 150 RESISTIVE OR INDUCTIVE LOAD 8.0 4.0 2.0 0 20 40 60 80 100 120 150 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) PEAK FORWARD SURGE CURRENT(AMPERES) 6.0 0 TJ=TJMAX 125 0.375" (9.5MM) LEAD LENGTH 100 75 50 25 0 LEAD TEMPERATURE ( C) 1 FIG.3-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 100 FIG.4-TYPICAL REVERSE CHARACTERISTICS 50 20 10 TJ=150 C TJ=125 C TJ=125 C (mA) 10 INSTANTANEOUS REVERSE CURRENT INSTANTANEOUS FORWARD CURRENT( AMPERES) 10 NUMBER OF CYCLES AT 60Hz PULSE WIDTH=300 S 1% DUTY CYCLE 1 TJ=25 C 0.1 SRF1020CT-SRF1040CT SRF1050CT-SRF10200CT 1 TJ=75 C 0.1 0.01 TJ=25 C 0.01 0.2 0 0.4 0.6 0.8 1.0 1.2 1.4 1.6 SRF1020CT-SRF1040CT SRF1050CT-SRF10200CT 0.001 INSTANTANEOUS FORWARD VOLTAGE (VOLTS) 0 20 40 60 80 100 PERCENT OF RATED PEAK REVERSE VOLTAGE% FIG.5-TYPICAL JUNCTION CAPACITANCE FIG.6-TYPICAL TRANSIENT THERMAL IMPEDANCE TRANSIENT THERMAL IMPEDANCE, C/ W JUNCTION CAPACITANCE(pF) 4000 TJ=25 C f=1.0MHZ Vsig=50mVp-p 1000 SRF1020CT-SRF1040CT SRF1050CT-SRF10200CT 100 0.1 1 10 100 REVERSE VOLTAGE. VOLTS 100 10 1 0.1 0.01 0.1 1 10 100 T, PULSE DURATION ,sec. JINAN JINGHENG ELECTRONICS CO., LTD. 1-97 HTTP://WWW.JINGHENGGROUP.COM