SR1535 THRU SR15200 (SINGLE CHIP) R SCHOTTKY BARRIER RECTIFIER Reverse Voltage - 35 to 200 Volts Forward Current - 15Amperes S E M I C O N D U C T O R FEATURES TO-220AC Plastic package has Underwriters Laboratory Flammability Classification 94V-0 Metal silicon junction ,majority carrier conduction 0.185(4.70) Guard ring for overvoltage protection Low power loss ,high efficiency 0.410(10.42) 0.161(4.10) 0.388(9.85) 0.147(3.74) DIA High current capability ,Low forward voltage drop 0.175(4.44) 0.055(1.39) 0.045(1.14) 0.113(2.88) High surge capability 0.102(2.60) 0.283(7.20) 0.244(6.20) For use in low voltage ,high frequency inverters, 0.610(15.50) JF SR1560 free wheeling ,and polarity protection applications 0.571(14.50) Dual rectifier construction PIN 1 High temperature soldering guaranteed:260° C/10 seconds,, 0.25"(6.35mm)from case 2 0.159(4.05) 1.161(29.50) 0.140(3.55) 1.106(28.10) 0.114(2.90) 0.098(2.50) 0.560(14.22) Component in accordance to RoHS 2002/95/EC and 0.053(1.34) WEEE 2002/96/EC 0.512(13.00) 0.047(1.20) 0.037(0.94) 0.027(0.68) MECHANICAL DATA 0.023(0.58) 0.014(0.35) Case: JEDEC TO-220AC molded plastic body 0.208(5.28) 0.192(4.88) Terminals: Lead solderable per MIL-STD-750,method 2026 Polarity: As marked Mounting Position: Any Dimensions in inches and (millimeters) Weight: 0.08ounce, 2.24 grams MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (Ratings at 25 C ambient temperature unless otherwise specified ,Single phase ,half wave ,resistive or inductive load. For capacitive load,derate by 20%.) Symbols Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current See Fig.1 Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC method) Maximum instantaneous forward voltage at 15 A Maximum instantaneous reverse current at rated DC blocking voltage(Note 1) T C =25 C T C =125 C VRRM VRMS VDC SR 1545 SR 1550 SR 1560 SR 15100 SR 15150 SR 15200 35 45 50 60 100 150 200 25 32 35 42 70 105 140 35 45 50 60 100 150 200 Units Volts Volts Volts I(AV) 15.0 Amps IFSM 150.0 Amps VF IR Typical thermal resistance (Note 2) R Operating junction temperature range TJ TSTG Storage temperature range SR 1535 0.60 0.75 0.90 0.85 0.95 Volts 0.2 30 50 3.0 JC mA C/W -65 to+150 C -65 to+150 C Notes: 1.Pulse test: 300 s pulse width,1% duty cycle 2.Thermal resistance from junction to case JINAN JINGHENG ELECTRONICS CO., LTD. 1-108 HTTP://WWW.JINGHENGGROUP.COM RATINGS AND CHARACTERISTIC CURVES SR1535 THRU SR15200(SINGLE CHIP) FIG.2-MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 25 175 RESISTIVE OR INDUCTVE LOAD 20 TJ=TJMAX 150 PEAK FORWARD SURGE CURRENT(AMPERES) AVERAGE FORWARD CURRENT AMPERES FIG.1-FORWARD CURRENT DERATING CURVE 15 10 5 0 0 50 100 150 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) 125 100 75 50 25 LEAD TEMPERATURE ( C) 1 FIG.3-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 100 FIG.4-TYPICAL REVERSE CHARACTERISTICS 20 50 SR1535 -- SR1550 INSTANTANEOUS REVERSE CURRENT (mA) 10 INSTANTANEOUS FORWARD CURRENT( AMPERES) 10 NUMBER OF CYCLES AT 60Hz 10 TJ=125 C PULSE WIDTH=300 S 1% DUTY CYCLE TJ=25 C 1 0.1 SR1560 - SR15200 TJ=125 C 1 0.1 TJ=75 C 0.01 SR1535 – SR1545 Sr1550 – SR15200 0.01 TJ=25 C 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 0.001 0 INSTANTANEOUS FORWARD VOLTAGE (VOLTS) 20 40 60 80 100 PERCENT OF RATED PEAK REVERSE VOLTAGE% FIG.5-TYPICAL JUNCTION CAPACITANCE FIG.6-TYPICAL TRANSIENT THERMAL IMPEDANCE TRANSIENT THERMAL IMPEDANCE, C/ W JUNCTION CAPACITANCE(pF) 4000 TJ=25 C f=1.0MHZ Vsig=50mVp-p 1000 SR1535 – SR1545 SR1550 –SR15200 100 40 0.1 1 10 10 1 0.1 0.01 100 0.1 1 10 100 T, PULSE DURATION ,sec. REVERSE VOLTAGE. VOLTS JINAN JINGHENG ELECTRONICS CO., LTD. 100 1-109 HTTP://WWW.JINGHENGGROUP.COM