MURF620CT THRU MURF660CT R GLASS PASSIVATED SUPER FAST RECTIFIER Reverse Voltage - 200 - 600V Volts Forward Current - 6.0Amperes S E M I C O N D U C T O R FEATURES ITO-220AB Plastic package has Underwriters Laboratory Flammability Classification 94V-0 Fast switching for high efficiency 0.190(4.75) 0.165(4.25) 0.145(3.55) Low forward voltage drop 0.128(3.25) DIA 0.130(3.31) Single rectifier construction 0.110(2.81) 0.111(2.83) High surge capability 0.101(2.57) For use in low voltage ,high frequency inverters, 0.174(4.42) 0.165(4.18) free wheeling ,and polarity protection applications 0.410(10.41) JF MURF620CT High temperature soldering guaranteed:260 C/10 seconds, 0.25"(6.35mm)from case 0.388(9.85) PIN 1 2 3 0.666(16.92) 0.325(8.25) 0.633(16.08) 0.321(8.15) 0.136(3.45) 1.083(27.5) 0.138(3.50) 0.116(2.95) 0.551(14.00) WEEE 2002/96/EC 0.512(13.00) 0.029(0.73) MECHANICAL DATA 0.019(0.47) 0.104(2.64) 0.096(2.44) 0.029(0.73) 0.019(0.47) Case: JEDEC ITO-220AB molded plastic body Terminals: Lead solderable per MIL-STD-750,method 2026 Polarity: As marked. Mounting Position: Any Dimensions in inches and (millimeters) Weight: 0.08ounce, 2.24 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (Ratings at 25 C ambient temperature unless otherwise specified ,Single phase ,half wave ,resistive or inductive load. For capacitive load,derate by 20%.) Symbols Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Per leg Total device Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC method) Maximum average forward rectified current(see Fig.1) VRRM VRMS VDC 200 400 600 140 280 420 200 400 600 Units Volts Volts Volts IFSM 150.0 75 Amps IR Maximum Reverse Recovery Time (Note 2) MURF 660CT Amps VF T A =125 C MURF 640CT I(AV) Maximum instantaneous reverse current at rated DC blocking voltage(Note 1) T A =25 C MURF 620CT 3.0 6.0 Maximum instantaneous forward voltage at 10.0 A(Note 1 ) 0.975 R Operating junction temperature range TJ TSTG 1.3 500 JC 1.7 10 5 Trr Typical thermal resistance (Note 3) Storage temperature range 0.571(14.5) 1.161(29.5) 0.177(4.50) Component in accordance to RoHS 2002/95/EC and 0.610(15.5) Volts uA 35 ns 3.0 C/W -65 to+150 C -65 to+150 C Notes: 1. Pulse test: 300 s pulse width,1% duty cycle 2. Reverse recovery test conditions IF=0.5A,IR=1.0A, Irr=0.25A 3. Thermal resistance from junction to case JINAN JINGHENG ELECTRONICS CO., LTD. 9-16 HTTP://WWW.JINGHENGGROUP.COM RATINGS AND CHARACTERISTIC CURVES MURF620CT THRU MURF660CT FIG.2-MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 12 120 10 100 RESISTIVE OR INDUCTVE LOAD 8 PEAK FORWARD SURGE CURRENT(AMPERES) AVERAGE FORWARD CURRENT AMPERES FIG.1-FORWARD CURRENT DERATING CURVE 6 4 2 0 0 20 40 60 80 100 120 80 60 40 20 0 180 150 0.1 1 10 100 LEAD TEMPERATURE ( C) NUMBER OF CYCLES AT 60Hz FIG.3-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS FIG.4-TYPICAL REVERSE CHARACTERISTICS 20 50 TJ=100 C (UA) 10 INSTANTANEOUS REVERSE CURRENT INSTANTANEOUS FORWARD CURRENT( AMPERES) 10 PULSE WIDTH=300 S 1% DUTY CYCLE 1 0.1 1 TJ=25 C 0.1 0.01 0.01 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 0.001 0 INSTANTANEOUS FORWARD VOLTAGE (VOLTS) 20 40 60 80 100 PERCENT OF RATED PEAK REVERSE VOLTAGE% FIG.6-TYPICAL TRANSIENT THERMAL IMPEDANCE TRANSIENT THERMAL IMPEDANCE, C/ W FIG.5-TYPICAL JUNCTION CAPACITANCE JUNCTION CAPACITANCE(pF) 4000 TJ=25 C f=1.0MHZ Vsig=50mVp-p 1000 100 0.1 1 10 100 10 1 0.1 0.01 REVERSE VOLTAGE. VOLTS JINAN JINGHENG ELECTRONICS CO., LTD. 100 0.1 1 10 100 T, PULSE DURATION ,sec. 9-17 HTTP://WWW.JINGHENGGROUP.COM