1N5391 THRU 1N5399 R GENERAL PURPOSE PLASTIC RECTIFIER FEATURES SILICON RECTIFIER Reverse Voltage - 50 to 1000 Volts Forward Current -1.5Amperes S E M I C O N D U C T O R DO-15 JF The plastic package carries Underwrites Laboratory Flammability Classification 94V-0 Construction utilizes void-free molded plastic technique High surge current capability 1.5A operation at TL=70 C with no thermal runaway Low reverse leakage High forward surge current capability High temperature soldering guaranteed: 260 C/10 seconds at terminals 0.375"(9.5mm) lead length,5lbs.(2.3kg)tension Component in accordance to RoHs 2002/95/EC and WEEE 2002/96/EC 1.0(25.4) MIN 0.140(3.6) 0.104(2.6) DIA 0.300(7.6) 0.230(5.6) MECHANICAL DATA Case: JEDEC DO-15 molded plastic body Terminals: Lead solderable per MIL-STD-750,method 2026 Polarity: Color band denotes cathode end Mounting Position: Any Weight: 0.014ounce, 0.33 gram 1.0(25.4) MIN 0.034(0.9) 0.028(0.7) DIA Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (Ratings at 25 C ambient temperature unless otherwise specified ,Single phase ,half wave 60Hz,,resistive or inductive load. For capacitive load, derate by 20%.) Symbols 1N 5391 1N 5392 1N 5393 1N 5394 1N 5395 1N 5396 1N 1N 5397 5398 1N 5399 Units 50 100 200 300 400 500 600 800 1000 35 70 140 210 280 350 420 560 700 Maximum DC Blocking Voltage VRRM VRMS VDC 50 100 200 300 400 500 600 800 1000 Volts Volts Volts Maximum average Forward Rectified Current 0.375"(9.5mm)lead length at TA=75 C Peak Forward Surge Current (8.3ms half sinewave superimposed on rated load (JEDEC method) Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage I(AV) 1.5 Amps IFSM 50.0 Amps Maximum Instantaneous Forward Voltage at 1.5 A VF 1.1 Volts Maximum Reverse current at rated DC Blocking Voltage IR TA =25 C TA =100 C Typical Thermal Resistance(Note 2) R Typical Junction Capacitance(Note 1) CJ Operating and Storage Temperature Range TJ TSTG 5.0 A 50.0 JA 60.0 C/W 50.0 PF -65 to+150 C Note: 1.Measured at 1MHz and applied reverse voltage of 4.0V DC. 2.Thermal resistance from junction to ambient and from junction to lead at 0.375"(9.5mm)lead length , P.C.B. mounted JINAN JINGHENG ELECTRONICS CO., LTD. 6-12 HTTP://WWW.JINGHENGGROUP.COM SILICON RECTIFIER RATINGS AND CHARACTERISTIC CURVES 1N5391 THRU 1N5399 FIG.2-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 1.5 1.2 INSTANTANEOUS FORWARD CURRENT( AMPERES) AVERAGE FORWARD CURRENT (AMPERES) FIG.1-FORWARD CURRENT DERATING CURVE 0.9 0.6 SINGLE PHASE HALF WAVE 60Hz RESISTIVE OR INDUCTIVE LOAD 0.375"(9.5mm) lead length 0.3 0 0 25 50 75 100 125 150 175 AMBIENT TEMPERATURE ( C) 20 10 1 TJ=25 C PULSE WIDTH=300 S 1% DUTY CYCLE 0.1 0.01 FIG.3-MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 0.6 0.8 1.0 1.2 1.4 1.5 INSTANTANEOUS FORWARD VOLTAGE (VOLTS) 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) 40 30 FIG.4-TYPICAL REVERSE CHARACTERISTICS 20 INSTANTANEOUS REVERSE CURRENT ( A) PEAK FORWARD SURGE CURRENT(AMPERES) 50 10 0 1 10 100 NUMBER OF CYCLES AT 60Hz FIG.5-TYPICAL JUNCTION CAPACITANCE JUNCTION CAPACITANCE(pF) 100 10 TJ=100 C 1.0 0.1 TJ=25 C 0.01 0 20 40 60 80 100 120 TJ=25 C PERCENT OF RATED PEAK REVERSE VOLTAGE %) 10 1 0.1 1 10 100 REVERSE VOLTAGE. (VOLTS) JINAN JINGHENG ELECTRONICS CO., LTD. 6-19 HTTP://WWW.JINGHENGGROUP.COM 140