S3A THRU S3M Ｒ GENERAL PURPOSE PLASTIC RECTIFIER FEATURES SILICON RECTIFIER Reverse Voltage - 50 to 1000 Volts Forward Current -3.0Amperes S E M I C O N D U C T O R SMB(DO-214AA) The plastic package has Underwrites Laboratory Flammability Classification 94V-0 Construction utilizes void-free molded plastic technique High surge current capability 3.0A operation at TL=75 C with no thermal runaway Typical IR less than 0.1 A High temperature soldering guaranteed: 250 C/10 seconds,0.375"(9.5mm) ０．１５５（３．９４） ０．１３０（３．３０） ０．０８６（２．２０） ０．０７７（１．９５） ０．１８０（４．５７） ０．１６０（４．０６） MECHANICAL DATA ０．０１２（０．３０５） ０．００６（０．１５２） ０．０９６（２．４４） ０．０８４（２．１３） Case: JEDEC SMB(DO-214AA) molded plastic body Terminals: solder plated ,solderable per MIL-STD-750,method 2026 Polarity: color band denotes cathode end ０．００８（０．２０３） ＭＡＸ ０．０６０（１．５２） ０．０３０（０．７６） Weight: 0.003ounce,0.093 gram ０．２２０（５．５９） ０．２０５（５．２１） MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Dimensions in inches and (millimeters) (Ratings at 25 C ambient temperature unless otherwise specified ,Single phase ,half wave 60Hz,,resistive or inductive load. For capacitive load, derate by 20%.) Symbols S3A S3B S3D S3G S3J S3K S3M Volts 50 100 300 400 600 200 1000 35 70 210 280 420 140 700 Maximum DC Blocking Voltage to TA=105 C VRRM VRMS VDC 50 100 300 400 600 200 1000 Volts Volts Volts Maximum average Forward Rectified Current 0.5"(12.5mm)lead length at TL=105 C I(AV) 3.0 Amps Peak Forward Surge Current (8.3ms half sinewave superimposed on rated load (JEDEC method) IFSM 125.0 Amps 1.0 Volts Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum Instantaneous Forward Voltage at 3.0 A Maximum Reverse current at rated DC Blocking Voltage TA =25 C TA =150 C Typical Thermal Resistance (Note 2) VF IR R CJ Maximum DC Blocking Voltage temperature TA TJ TSTG A 100.0 JA Typical Junction Capacitance (Note 1) Operating and Storage temperature Range 5.0 20.0 C/W 40.0 PF +150.0 C -50 to+175 C Note: 1.Measured at 1MHz and applied reverse voltage of 4.0V DC. 2.Thermal resistance from junction to ambient and from junction to lead at 0.375"(9.5mm)lead length , P.C.B. mounted 7-40 JINAN JINGHENG CO., LTD. NO.51 HEPING ROAD PR CHINA TEL:86-531-6943657 FAX:86-531-6947096 WWW.JIFUSEMICON.COM FIG.2-TYPICAL INSTANTANEOUS FORWARD VOLTAGE.(V) ４ １００ ３ ３０ ２ INSTANTANEOUS FORWARD CURRENT( AMPERES) AVERAGE FORWARD CURRENT AMPERES FIG.1-FORWARD CURRENT DERATING CURVE SILICON RECTIFIER RATINGS AND CHARACTERISTIC CURVES S3A THRU S3M SINGLE PHASE HALF WAVE 60Hz RESISTIVE OR INDUCTIVE LOAD 0.375"(9.5mm) lead length １ ０ ０ ２５ ５０ ７５ １００ １２５ １５０ １７５ LEAD TEMPERATURE ( C) FIG.3-MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT １０ ３ １ ０．１ TJ=25 C PULSE WIDTH=300 S 1% DUTY CYCLE ０．３ ０．０１ ０．４ ０．６ ０．８ １．０ １．２ １．４ １．６ １．８ ２００ INSTANTANEOUS FORWARD VOLTAGE (VOLTS) NON-REPETITIVE ５０ FIG.4-TYPICAL REVERSE CHARACTERISTICS １０ INSTANTANEOUS REVERSE CURRENT ( A) PEAK FORWARD SURGE CURRENT(AMPERES) １００ 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) ０ １ １０ １００ NUMBER OF CYCLES AT 60Hz FIG.5-TYPICAL JUNCTION CAPACITANCE JUNCTION CAPACITANCE(pF) ２００ １００ １．０ ０．１ TJ=25 C ０．０１ ０ ２０ ４０ ６０ ８０ １００ １２０ １４０ PERCENT OF RATED PEAK REVERSE VOLTAGE % TJ=25 C １０ １ ０．１ １ １０ １００ REVERSE VOLTAGE.( VOLTS) 7-41 JINAN JINGHENG CO., LTD. NO.51 HEPING ROAD PR CHINA TEL:86-531-6943657 FAX:86-531-6947096 WWW.JIFUSEMICON.COM