ZC-1072-10 This filter provides very good common mode and differential mode insertion loss for 10 amp single phase systems. This filter is designed for military systems with requirements to meet the MIL-STD-461 emissions specification. The standard construction is more than adequate for most installation environments. Should your application require operation in a more severe environment, JMK's engineering staff can modify the mechanical construction to meet the most severe design criteria. Operating Voltage = _______________________125 V~ Operating Current (max) = ________________ 10 Amps Operating Frequency = _________________dc - 400 Hz Temperature Range (storage) = __________-40 to 85°C Temperature Range (operating) = ________ -20 to 60°C INSERTION LOSS vs. FREQUENCY Diel. Withstanding Voltage (ph - case) = ______ 1000 v~ Diel. Withstanding Voltage (ph - ph) = _______1000 Vdc Leakage Current @ 125 v~, 60 hz = ______ 0.6 mA Max Discharge voltage after 60 sec = ___________34 V Max Calculated MTBF = __________ 3,614,166 Hrs 30°C GB Order P/N: ZC-1072-10 USA JMK Inc 15 Caldwell Dr. Amherst, NH 03031 PH: 603 886-4100 FX: 603 886-4115 email: [email protected] PH: 44-(0) 7785310729 Fax: 44-(0) 141 589 1884 EUR JMK Inc Glasgow G13 1DN Scotland UK