EF-1233M-12 This filter provides very good common mode and differential insertion loss for 12 amp single phase systems. This filter works well for medical systems with requirements to meet the new European EN55022 emissions specification. The standard construction is more than adequate for most installation environments. Should your application require operation in a more severe environment JMK's engineering staff can easily modify the mechanical construction to meet the most severe design criteria. Operating voltage = 90/240 v~ Operating current (max) = 12 amperes Frequency = 50/60 hz Temperature range (storage) = -40 to 100 c Temperature range (operating), @12 amps = -20 to 40oC @10 amps = -20 to 60oC Diel. withstanding voltage (ph - case) =1500v~ Diel. withstanding voltage (ph - ph) = 1500 vdc Leakage current @ 250 v~, 60 hz = 30 ua max Discharge voltage after 1.0 sec = 32 V max Safety Agencies = CSA (NRTL) Order p/n: EF-1233M-12 USA JMK Inc 15 Caldwell Dr. Amherst, NH 03031 EUR JMK Inc Glasgow G13 1DN Scotland UK PH: 603 886-4100 FX: 603 886-4115 email: [email protected] PH: 44-(0) 7785310729 Fax: 44-(0) 141 589 1884