Tap/Isolator/WDM Hybrid Tap Isolator WDM Hybrid Parameter Single Stage Dual Stage Signal Wavelength Range 1535-1565 nm 1530-1565 nm Pump Wavelength Range 950-1010 nm or 1450-1490 nm Insertion Loss in Signal Channel ≤ 1.2 dB Insertion Loss in Pump Channel ≤ 1.5 dB ≤ 0.6 dB Insertion Loss in Tap Channel ≤ 14dB (5% Tap), ≤ 21dB (1% Tap) Signal Channel Isolation ≥ 28 dB ≥ 40 dB Return Loss ≥ 45 dB Maximum Power 300 mW PDL ≤ 0.1 dB ≤ 0.15 dB PMD ≤ 0.25 ps ≤ 0.05 ps Directivity ≥ 50 dB Operating Temperature -5° C ~ + 65° C - 40° C ~ + 85° C Storage Temperature Package Dimensions Bare Fiber (B) 5.5 mm (Φ) x 35 mm (L) 900 µm loose tube (L) 5.5 mm (Φ) x 40 mm (L) Note1: All values specified are without connectors. Note2: Higher performance specifications upon request. T I W - - - Stage Type Pump Wavelength S: Single Stage 14: 1480 nm D: Dual Stage 98: 980 nm www.lighteltech.com 2210 Lind Ave SW, Suite 100 Renton, WA 98057 USA (425) 277-8000 ph. (425) 277-5280 Fax Tap Ratio 01: 1% 02: 2% 05: 5% 10: 10% Fiber Length A: 1 meter B: 1.5 meter S: Special Pigtail Style Connector (=Package style) 0: None B: bare fiber 1: FC/PC L: 900 µm loose tube 2: FC/APC 3: SC/ PC 4: SC/APC 5: FC/SPC 6: SC/SPC All rights Reserved 2009 7: LC/UPC 8: LC/SPC 9: Special A: FC/UPC B: SC/UPC C: ST