DWDM 8 Channel 100 GHz & 200 GHz DWDM Module 100 GHz Parameter 200 GHz ITU Grid Center Wavelength (λc) Channel Pass Band Insertion Loss (Pass Band) ≥ λc ± 0.11 nm ≥ λc ± 0.25 nm ≤ 3.0 dB ≤ 2.8 dB Uniformity ≤ 1.5 dB Pass Band Ripple ≤ 0.5 dB ≥ 25 dB Adjacent Channel Isolation ≥ 30 dB Non-Adjacent Channel Isolation ≥ 40 dB Directivity ≥ 50 dB Return Loss ≥ 45 dB ≤ 0.20 dB PDL ≤ 0.15 dB PMD ≤ 0.1 ps Maximum Power 300 mW 0° C to + 65° C Operating Temperature - 40° C ~ + 85° C Storage Temperature Package Dimensions 110 mm x 90 mm x 7 mm 100 mm x 90 mm x 12 mm MD Type packaging Note1: All values specified are without connectors. Note2: Higher performance specifications are available upon request. Note3: Fiber type Corning SMF-28e. Note4: Channel count is from low to high for mux and high to low for demux if mux & demux are packaged in one cassette. In this case the first channel & last channel in P/N is for mux. Note5: Over operating temperature All SOP D WM- - - 0 8 - Channel Spacing Module Type 1: 100 GHz M: Mux 2: 200 GHz D: Demux MD: Mux & Demux in One cassette www.lighteltech.com 2210 Lind Ave SW, Suite 100 Renton, WA 98057 USA (425) 277-8000 ph. (425) 277-5280 Fax Number of Channels 08: 8 Ch - - - 1st ITU Channel# Fiber Length Pigtail Style e.g 23: 1558.98 nm A: 1 meter (=Package style) B: 1.5 meter B: bare fiber S: Special L: 900 µm loose tube All rights Reserved 2009 Connector 0: None 1: FC/PC 2: FC/APC 3: SC/ PC 4: SC/APC 5: FC/SPC 6: SC/SPC 7: LC/UPC 8: LC/SPC 9: Special A: FC/UPC B: SC/UPC C: ST