Series 800 Vertisocket DIP Socket w/Bifurcated Contacts for Horizontal Mounting ™ FEATURES • Full line of Horizontal Display DIP Sockets for DIP packaging of LEDs, incandescent lamps, DIP switches, test points, etc. • Variations of Mounting Position and Pin Configuration provide Exceptional Design Freedom • Restricted Entry for Contact Protection • Accepts Standard LEDs and Incandescent Displays as well as 0.500 [12.70] and 0.600 [15.24] Tall Displays GENERAL SPECIFICATIONS • STANDARD BODY MATERIAL: black UL 94V-0 4/6 Nylon • BIFURCATED CONTACTS: Grade A spring-tempered Phosphor Bronze per QQ-B-750 • CONTACT PLATING: 10µ [0.25µ] min. Au per MIL-G-45204 over 50µ [1.27µ] min. Ni per QQ-N-290 –OR– 200µ min. matte Sn per ASTM B545-97(2004)e1 over 50µ [1.27µ] min. Ni per QQ-N-290 –OR– 200µ [5.08µ] min. bright 90/10 Sn/Pb per MILT-10727 Type 1 over 50µ [1.27µ] min. Ni per QQ-N-290 • SPACER: Fish paper • CONTACT CURRENT RATING: 1.5 amps • OPERATING TEMPERATURE: 221°F [105°C] Sn & Sn/Pb plating; 257°F [125°C] Au plating • INSERTION FORCE: 110g/pin average • WITHDRAWAL FORCE: 75g/pin average • ACCEPTS: flat leads up to 0.014 [0.36] thick and 0.020 [0.51] wide; round leads up to 0.020 [0.51] dia. • ACCEPTS LEAD LENGTHS: 0.075-0.160 [1.91-4.06] ORDERING INFORMATION XX-X82 X-90 XX XX Optional Rails WR=Without Rails Plating Options T=Sn TL=Sn/Pb (blank)=Au Display Angle Row-to-Row 0: “X” = 0.100 [2.54 2: “X” = 0.200 [5.08] 3: “X” = 0.300 [7.62] Series 282: “C” = 0.100 [5.08] 82: “C” = 0.300 [7.62] 682: “C” = 0.600 [15.24] No. of Pins (See Table) MOUNTING CONSIDERATIONS • SUGGESTED PCB HOLE SIZE: 0.044 ±0.002 [1.12 ±0.05] dia. Consult Data Sheet 13002 for Vertical Mounting Vertisocket™ with bifurcated contacts. Dim. “D” Dim. “X” No. of Pins 0.100 [2.54] 0.290 [7.37] 0.200 [5.08] 8, 10 0.300 [7.62] 0.100 [2.54] 0.390 [9.91] 0.200 [5.08] 8, 14 thru 20 0.300 [7.62] 0.690 [17.53] ALL DIMENSIONS: INCHES [MILLIMETERS] ALL TOLERANCES: ±0.005 [0.13] UNLESS OTHERWISE SPECIFIED FOR VERTICAL MOUNTING, SEE DATA SHEET 13002 CONSULT FACTORY FOR OTHER SIZES AND CONFIGURATIONS 0.100 [2.54] 0.200 [5.08] 8 thru 40, 48 0.300 [7.62] CUSTOMIZATION: ARIES SPECIALIZES IN CUSTOM DESIGN AND PRODUCTION. SPECIAL MATERIALS, PLATINGS, SIZES, AND CONFIGURATIONS CAN BE FURNISHED, DEPENDING ON QUANTITY. ARIES RESERVES THE RIGHT TO CHANGE PRODUCT GENERAL SPECIFICATIONS WITHOUT NOTICE PRINTOUTS OF THIS DOCUMENT MAY BE OUT-OF-DATE AND SHOULD BE CONSIDERED UNCONTROLLED 2609 Bartram Road • Bristol, PA 19007-6810 USA TEL 215-781-9956 • FAX 215-781-9845 WWW.ARIESELEC.COM • [email protected] 13001 Rev. 5.3 1 of 1