Series 647 Universal SOIC-to-DIP 0.600 [15.24] Adapter FEATURES • 44-pin Adapter for Mounting Aries Series 547 Universal SOIC ZIF Test Socket to 0.600 [15.24] DIP PCB Layout GENERAL SPECIFICATIONS • BODY MATERIAL: black 0.062 [1.58] thick FR-4 –OR– IS410 per IPC A4101A/26, 0.094 [2.39] thick, with 1-oz. min. Cu traces • FEMALE PIN BODY: Brass 360 1/2-hard per UNS C36000 ASTM-B16-00 • FEMALE PIN BODY PLATING: 200μ [5.08μ] min. Sn per ASTM B545 Type 1 over 100μ [2.54μ] ORDERING INFORMATION min. Ni per SAE AMS-QQ-N-290 Specify 44-647-10 • 4-FINGER COLLET CONTACT: BeCu per UNS C17200 ASTM-B194-01 • COLLET CONTACT PLATING: 10μ [0.254μ] min. Au per MIL-G-45204 over 50μ [1.27μ] min. Ni per SAE AMS-QQ-N-290 • MALE PIN: Phosphor Bronze 544 UNS C5400 ASTM B139-90 • MALE PIN PLATING: 200μ [5.08μ] min. Sn per ASTM B545 Type 1 over 100μ [2.54μ] min. Ni per SAE AMS-QQ-N-290 • COLLET CONTACT CURRENT RATING: 3 amps • OPERATING TEMPERATURE: 221°F [105°C] • INSERTION FORCE: 180g/pin, based on a 0.018 [0.46] dia. test lead • WITHDRAWAL FORCE: 90g/pin, based on a 0.018 [0.46] dia. test lead • NORMAL FORCE: 140g/pin, based on a 0.018 [0.46] dia. test lead MOUNTING CONSIDERATIONS • SUGGESTED PCB HOLE SIZE: 0.028 ±0.002 [0.71 ±0.05] dia. ALL DIMENSIONS: INCHES [MILLIMETERS] ALL TOLERANCES: ±0.005 [0.13] UNLESS OTHERWISE SPECIFIED FOR TEST SOCKETS, SEE DATA SHEET 10015 CONSULT FACTORY FOR OTHER SIZES AND CONFIGURATIONS CUSTOMIZATION: ARIES SPECIALIZES IN CUSTOM DESIGN AND PRODUCTION. SPECIAL MATERIALS, PLATINGS, SIZES, AND CONFIGURATIONS CAN BE FURNISHED, DEPENDING ON QUANTITY. ARIES RESERVES THE RIGHT TO CHANGE PRODUCT GENERAL SPECIFICATIONS WITHOUT NOTICE PRINTOUTS OF THIS DOCUMENT MAY BE OUT-OF-DATE AND SHOULD BE CONSIDERED UNCONTROLLED 2609 Bartram Road • Bristol, PA 19007-6810 USA TEL 215-781-9956 • FAX 215-781-9845 WWW.ARIESELEC.COM • [email protected] 10016 Rev. 2.1 1 of 1