Series 152, 156, and 157 In-Line Jumpers on 0.100 [2.54] Centers FEATURES • Au-plated End Connectors with Solid Brass Pins on 0.100 [2.54] Centers • Available Single-ended (Series 156), Double-ended (Series 157), or Bare-ended (Series 152) • Reliable, Electronically-tested Solder Connections • Easy Identification and Tracing with 10-color Cable GENERAL SPECIFICATIONS • HOUSING: natural UL 94-HB Nylon 6/6 • HEADER PINS: Brass, 1/2-hard • PIN PLATING: 10µ [0.25µ] min. Au per MIL-G-45204 over 50µ [1.27µ] min. Ni per SAE AMSQQ-N-290B • CABLE INSULATION: UL Style 1061 Polyvinyl Chloride (PVC), semi-rigid • LAMINATE: clear PVC, Self-extinguishing • CONDUCTORS: 26-AWG, 7/34-strand, tinned Cu per ASTM B 33 Series 152 Conductors are not pre-tinned. Consult factory for pre-tinned, bare-ended jumpers • CABLE CURRENT RATING: 1 amp at 10°C [50°F] above ambient • CABLE VOLTAGE RATING: 300V • CABLE TEMPERATURE RATING: 176°F [80°C] ORDERING INFORMATION XX-XXX-XXX MOUNTING CONSIDERATIONS Cable Length “L” (inches) 1.00" = 001 (min) 1.25" = 001.25 1.50" = 001.5 Etc. No. of Conductors (4 thru 22) * Not Available in RoHS • SUGGESTED PCB HOLE SIZE: 0.033 ±0.002 [0.86 ±0.05] dia. ALL DIMENSIONS: INCHES [MILLIMETERS] ALL TOLERANCES: ±0.005 [0.13] UNLESS OTHERWISE SPECIFIED FOR PRE-TINNED, BARE-ENDED JUMPERS, CONSULT FACTORY CONSULT FACTORY FOR OTHER SIZES AND CONFIGURATIONS Series 156 = Single-ended* 157 = Double-ended* 152 = Bare-ended No. of Conductors Min. Insulation Length 4 thru 8 1.00 [25.40] 9 and 10 1.25 [31.75] 11 thru 22 1.50 [38.10] CUSTOMIZATION: ARIES SPECIALIZES IN CUSTOM DESIGN AND PRODUCTION. SPECIAL MATERIALS, PLATINGS, SIZES, AND CONFIGURATIONS CAN BE FURNISHED, DEPENDING ON QUANTITY. ARIES RESERVES THE RIGHT TO CHANGE PRODUCT GENERAL SPECIFICATIONS WITHOUT NOTICE PRINTOUTS OF THIS DOCUMENT MAY BE OUT-OF-DATE AND SHOULD BE CONSIDERED UNCONTROLLED 2609 Bartram Road • Bristol, PA 19007-6810 USA TEL 215-781-9956 • FAX 215-781-9845 WWW.ARIESELEC.COM • [email protected] 11014 Rev. 10.2 1 of 1