EJECT-A-DIP Lock/Eject DIP Socket w/Collet Contacts & Surface Mount Pins ™ FEATURES • Rugged, Solderable Socket with a Unique Ejector/Latch for Fast In-field Board Maintenance • Latch Locks-in Connector or Device for High-vibration Environments • Ejector/Latch removes DIP Packages without Damage • High-temperature 4/6 Nylon Suitable for Any Surface Mount Soldering Application GENERAL SPECIFICATIONS • LATCH & BODY: Black UL 94V-0 Glass-filled 4/6 Nylon • PIN BODY: Brass 360 1/2-hard per UNS C36000 ASTM-B16-00 • PIN BODY PLATING: 10µ [0.25µ] min. Au per MIL-G-45204 –OR– 200µ [5.08µ] min. 93/7 Sn/Pb per ASTM B545 –OR– 200µ [5.08µ] min. Sn per ASTM B545 Type 1 over 100µ [2.54µ] min. Ni per SAE AMS-QQ-N-290B • 6-FINGER COLLET CONTACT: BeCu per UNS C17200 ASTM-B194-01 • CONTACT PLATING: 10µ [0.25µ] min. Au per MIL-G-45204 over 50µ [1.27µ] min. Ni per SAE AMS-QQ-N-290B. Heavy 30µ [0.76µ] Au plating on contacts also available. • CONTACT CURRENT RATING: 3 amps • INSULATION RESISTANCE: 10,000 MΩ @ 500 VDC • WITHSTANDING VOLTAGE: 1000 V RMS • OPERATING TEMPERATURE: -67°F to 221°F [-55°C to 105°C] for Sn plating, -67°F to 257°F [-55°C to 125°C] for Au plating • INSERTION FORCE: 67g/pin, based on 0.018 [0.46] dia. test lead • WITHDRAWAL FORCE: 30g/pin, based on 0.018 [0.46] dia. test lead • NORMAL FORCE: 45g/pin, based on 0.018 [0.46] dia. test lead long ORDERING INFORMATION XX-CXXX-X XXX XX Optional Plating H = Heavy Au Collet Plating 0 = Au Collet, Sn Shell 0TL = Au Collet, Sn/Pb Shell 1 = Au Collet & Shell Termination 0 = Surface Mount Pins Dim. “H” (See Table) No. of Pins (See Table) MOUNTING CONSIDERATIONS • SUGGESTED PCB PAD SIZE: 0.063 [1.60] dia. ALL DIMENSIONS: INCHES [MILLIMETERS] ALL TOLERANCES: ±0.005 [0.13] UNLESS OTHERWISE SPECIFIED FOR COLLET SOCKET w/SOLDER PIN TAILS, SEE DATA SHEET 12024 FOR COLLET SOCKET w/WIRE WRAP PINS, SEE DATA SHEET 12025 CONSULT FACTORY FOR OTHER SIZES AND CONFIGURATIONS CUSTOMIZATION: ARIES SPECIALIZES IN CUSTOM DESIGN AND PRODUCTION. SPECIAL MATERIALS, PLATINGS, SIZES, AND CONFIGURATIONS CAN BE FURNISHED, DEPENDING ON QUANTITY. ARIES RESERVES THE RIGHT TO CHANGE PRODUCT GENERAL SPECIFICATIONS WITHOUT NOTICE PRINTOUTS OF THIS DOCUMENT MAY BE OUT-OF-DATE AND SHOULD BE CONSIDERED UNCONTROLLED 2609 Bartram Road • Bristol, PA 19007-6810 USA TEL 215-781-9956 • FAX 215-781-9845 WWW.ARIESELEC.COM • [email protected] 12023 Rev. 5.2 1 of 2 EJECT-A-DIP Lock/Eject DIP Socket w/Collet Contacts & Surface Mount Pins ™ No. of Pins 14 14 16 16 24 24 24 28 28 28 32 32 32 40 40 40 Catalog No. 14-C280-XX 14-C195-XX 16-C280-XX 16-C195-XX 24-C300-XX 24-C212-XX 24-C182-XX 28-C300-XX 28-C212-XX 28-C182-XX 32-C300-XX 32-C212-XX 32-C182-XX 40-C300-XX 40-C212-XX 40-C182-XX Dim. “A” 0.950 [24.10] 0.950 [24.10] 1.050 [26.70] 1.050 [26.70] 1.490 [37.85] 1.490 [37.85] 1.490 [37.85] 1.690 [42.90] 1.690 [42.90] 1.690 [42.90] 1.890 [48.00] 1.890 [48.00] 1.890 [48.00] 2.290 [58.20] 2.290 [58.20] 2.290 [58.20] Dim.“B” 0.600 [15.24] 0.600 [15.24] 0.700 [17.78] 0.700 [17.78] 1.100 [27.94] 1.100 [27.94] 1.100 [27.94] 1.300 [33.02] 1.300 [33.02] 1.300 [33.02] 1.500 [38.10] 1.500 [38.10] 1.500 [38.10] 1.900 [48.26] 1.900 [48.26] 1.900 [48.26] ALL DIMENSIONS: INCHES [MILLIMETERS] ALL TOLERANCES: ±0.005 [0.13] UNLESS OTHERWISE SPECIFIED FOR COLLET SOCKET w/SOLDER PIN TAILS, SEE DATA SHEET 12024 FOR COLLET SOCKET w/WIRE WRAP PINS, SEE DATA SHEET 12025 CONSULT FACTORY FOR OTHER SIZES AND CONFIGURATIONS Centers “C” 0.300 [7.62] 0.300 [7.62] 0.300 [7.62] 0.300 [7.62] 0.600 [15.24] 0.600 [15.24] 0.600 [15.24] 0.600 [15.24] 0.600 [15.24] 0.600 [15.24] 0.600 [15.24] 0.600 [15.24] 0.600 [15.24] 0.600 [15.24] 0.600 [15.24] 0.600 [15.24] Dim. “D” 0.400 [10.16] 0.400 [10.16] 0.400 [10.16] 0.400 [10.16] 0.700 [17.78] 0.700 [17.78] 0.700 [17.78] 0.700 [17.78] 0.700 [17.78] 0.700 [17.78] 0.700 [17.78] 0.700 [17.78] 0.700 [17.78] 0.700 [17.78] 0.700 [17.78] 0.700 [17.78] Dim. “E” 0.770 [19.56] 0.770 [19.56] 0.870 [22.10] 0.870 [22.10] 1.300 [33.02] 1.300 [33.02] 1.300 [33.02] 1.500 [38.10] 1.500 [38.10] 1.500 [38.10] 1.700 [43.18] 1.700 [43.18] 1.700 [43.18] 2.100 [53.34] 2.100 [53.34] 2.100 [53.34] Dim. “F” 1.300 [33.02] 1.300 [33.02] 1.540 [39.12] 1.390 [35.31] 1.970 [50.04] 1.850 [47.00] 1.800 [45.72] 2.170 [55.12] 2.050 [52.07] 2.000 [50.80] 2.540 [64.52] 2.070 [52.58] 2.200 [55.88] 2.780 [70.61] 2.650 [67.31] 2.600 [66.04] Dim “G” 0.490 [12.45] 0.450 [11.43] 0.490 [12.45] 0.450 [11.43] 0.570 [14.48] 0.490 [12.45] 0.460 [11.68] 0.570 [14.48] 0.490 [12.45] 0.460 [11.68] 0.570 [14.48] 0.490 [12.45] 0.460 [11.68] 0.570 [14.48] 0.490 [12.45] 0.460 [11.68] Dim “H” 0.280 [7.11] 0.195 [4.95] 0.280 [7.11] 0.195 [4.95] 0.300 [7.62] 0.212 [5.39] 0.182 [4.62] 0.300 [7.62] 0.212 [5.39] 0.182 [4.62] 0.300 [7.62] 0.212 [5.39] 0.182 [4.62] 0.300 [7.62] 0.212 [5.39] 0.182 [4.62] CUSTOMIZATION: ARIES SPECIALIZES IN CUSTOM DESIGN AND PRODUCTION. SPECIAL MATERIALS, PLATINGS, SIZES, AND CONFIGURATIONS CAN BE FURNISHED, DEPENDING ON QUANTITY. ARIES RESERVES THE RIGHT TO CHANGE PRODUCT GENERAL SPECIFICATIONS WITHOUT NOTICE PRINTOUTS OF THIS DOCUMENT MAY BE OUT-OF-DATE AND SHOULD BE CONSIDERED UNCONTROLLED 2609 Bartram Road • Bristol, PA 19007-6810 USA TEL 215-781-9956 • FAX 215-781-9845 WWW.ARIESELEC.COM • [email protected] 12023 Rev. 5.2 2 of 2