Series 112, 113, and 114 Deci-Center Jumpers ™ FEATURES • Wide Array of DIP Jumper Configurations and Wiring Possibilities • Reliable, Electronically-tested Solder Connections • Strain Relief Provided thru Potted DIP End • Protective Covers on Header • Pitch Bars Maintain 0.100 [2.54] Conductor Spacing • Easy Identification and Tracing with 10-color Cable ORDERING INFORMATION GENERAL SPECIFICATIONS • HEADER BODY & PITCH BAR: black UL 94V-0 glass-filled 4/6 Nylon • HEADER PINS: Brass 1/2-hard • PIN PLATING: 10µ [0.25µ] min. Au per MIL-G-45204 over 50µ [1.27µ] min. Ni per SAE AMS-QQN-290B • CABLE INSULATION: UL Style 2697 Polyvinyl Chloride (PVC) • CABLE LAMINATE: clear PVC, self-extinguishing* • 0.050 [1.27] PITCH CONDUCTORS: 28-AWG, 7/36-strand, tinned Cu per ASTM B 33 • 0.039 [0.99] PITCH CONDUCTORS: 26-AWG, 7/34-strand) • CABLE CURRENT RATING: 1 amp at 10°C [50°F] above ambient • CABLE VOLTAGE RATING: 300V • CABLE TEMPERATURE RATING: 176°F [80°C] • CABLE CAPACITANCE: 13.0pF/ft. [42.7pF/meter] nominal at 1MHz* • CROSSTALK: 10-ft sample, 5ns rise time with 2 lines driven; near end 4.7%; far end 4.3% nominal* • PROPAGATION DELAY: 1.5ns/ft. [4.9ns/meter] nominal* • INSULATION RESISTANCE: 1010Ω (10 ft. [3 meters] min.) XX-XXX-XXX Series 112. 113, 114 112X. 113X, 114X (see Wiring Table) Cable Length (inches) 3.0" = 003 (min) 3.5" = 003.5 No. of Conductors (See Table) MOUNTING CONSIDERATIONS • SUGGESTED PCB HOLE SIZE: 0.033 ±0.002 [0.86 ±0.05] dia. * Applies to 0.050 [1.27] Pitch Cable Only Centers “C” Dim. “D” Available Sizes 0.300 [7.62] 0.395 [10.03] 4 thru 20 0.400 [10.16] 0.495 [12.57] 22 0.600 [15.24] 0.695 [17.65] 24, 28, 40 ALL DIMENSIONS: INCHES [MILLIMETERS] ALL TOLERANCES: ±0.005 [0.13] UNLESS OTHERWISE SPECIFIED FOR OTHER CONFIGURATIONS, SEE DATA SHEET 11008 FOR JUMPER LENGTHS UNDER 3.000 [76.20], CONSULT FACTORY CONSULT FACTORY FOR OTHER SIZES AND CONFIGURATIONS CUSTOMIZATION: ARIES SPECIALIZES IN CUSTOM DESIGN AND PRODUCTION. SPECIAL MATERIALS, PLATINGS, SIZES, AND CONFIGURATIONS CAN BE FURNISHED, DEPENDING ON QUANTITY. ARIES RESERVES THE RIGHT TO CHANGE PRODUCT GENERAL SPECIFICATIONS WITHOUT NOTICE PRINTOUTS OF THIS DOCUMENT MAY BE OUT-OF-DATE AND SHOULD BE CONSIDERED UNCONTROLLED 2609 Bartram Road • Bristol, PA 19007-6810 USA TEL 215-781-9956 • FAX 215-781-9845 WWW.ARIESELEC.COM • [email protected] 11008 Rev. 6.1 1 of 2 Series 112, 113, and 114 Deci-Center Jumpers ™ WIRING LIST ALL DIMENSIONS: INCHES [MILLIMETERS] ALL TOLERANCES: ±0.005 [0.13] UNLESS OTHERWISE SPECIFIED FOR OTHER CONFIGURATIONS, SEE DATA SHEET 11008 FOR JUMPER LENGTHS UNDER 3.000 [76.20], CONSULT FACTORY CONSULT FACTORY FOR OTHER SIZES AND CONFIGURATIONS Wire No. Series 112, 113, 114 Pin No. Series 112X, 113X, 114X Pin No. 1 1 1 2 2 16 3 3 3 4 4 15 5 5 3 6 6 14 7 7 4 8 8 13 9 9 5 10 10 12 11 11 6 12 12 11 13 13 7 14 14 10 15 15 8 16 16 9 CUSTOMIZATION: ARIES SPECIALIZES IN CUSTOM DESIGN AND PRODUCTION. SPECIAL MATERIALS, PLATINGS, SIZES, AND CONFIGURATIONS CAN BE FURNISHED, DEPENDING ON QUANTITY. ARIES RESERVES THE RIGHT TO CHANGE PRODUCT GENERAL SPECIFICATIONS WITHOUT NOTICE PRINTOUTS OF THIS DOCUMENT MAY BE OUT-OF-DATE AND SHOULD BE CONSIDERED UNCONTROLLED 2609 Bartram Road • Bristol, PA 19007-6810 USA TEL 215-781-9956 • FAX 215-781-9845 WWW.ARIESELEC.COM • [email protected] 11008 Rev. 6.1 2 of 2