RKT-065 Trimming Potentiometers PICTURE FEATURES Single turn Trimming Potentiometer Phenolic Trimming Potentiometer Cross slot rotor Top adjust and side adjust available Electrical Characteristics Common Dimensions Standard Resistance Range Resistance Tolerance RKT-065 Residual Resistance Resistance Taper Rated Power Operating Voltage Potational Life Load Life 100Ω - 2MΩ ±30% Max 5% of Nominnal Resistance, But under 30Ω Linear (B) 0.1W 50V Max Max ±5% change in resistance after 100 unloaded rotations Max ±5% change in resistance after 3 hours loaded Mechanical Characteristics Rotational Angle Rotational Torque Stop-end Strength 200° ± 20° 30~350g.cm 500g.cm minimum Climatic Characteristics Operating Temp Temp Characteristics Humidity Char -25℃ ~ 40℃ +5~ -10% change in NR after 5 hours at 70℃ Maximum resistance change within ±20% after 500hours unloaded at 40℃ and R.H.95% RKT-063 Soldering Conditions Temperature Time 260℃ 3 seconds Website: www.kingtronics.com Email: [email protected] Tel: (852) 8106 7033 Fax: (852) 8106 7099 1 RKT-065 Trimming Potentiometers RKT-065X (Discontinued) How to Order RKT-065 --- 103 --- R Model Resistance Code RoHS WIPER 2(d) CLOCKWISE Tolerance is ±0.25 if no identification Resistance Table RKT-063X (Discontinued) P.C.B Layout Resistance(Ohms) Resistance Code 100 200 300 330 470 500 680 1,000 1,500 2,000 2,200 3,000 3,300 4,700 5,000 6,800 10,000 15,000 20,000 22,000 30,000 33,000 47,000 50,000 68,000 100,000 150,000 200,000 220,000 300,000 330,000 470,000 500,000 680,000 1,000,000 2,000,000 101 201 301 331 471 501 681 102 152 202 222 302 332 472 502 682 103 153 203 223 303 333 473 503 683 104 154 204 224 304 334 474 504 684 105 205 Special resistances available. Note: Specifications are subject to change without notice. Website: www.kingtronics.com Email: [email protected] Tel: (852) 8106 7033 Fax: (852) 8106 7099 2