H HiTRON UNIVERSAL AC INPUT AC-DC INDUSTRIAL DIN-RAIL SINGLE OUTPUT 60 WATTS SWITCHING MODE POWER SUPPLIES HID60 SERIES FEATURES: ACCOMMODATE UNIVERSAL AC SOURCES MEET UNIVERSAL SAFETY STANDARDS & INDUSTRIAL UL 508 INDUSTRIAL POWER SUPPLIES FOR SNAP-ON MOUNTING ON DIN-RAILS EMI MEET CISPR PUB. 22 & FCC CLASS B CE MARKING COMPLIANCE SPECIFICATION INPUT SPECIFICATION Input Voltage: Typ. 90-264Vac universal input. Input Connector: Phoenix GMSTBA2.5/3-G-7.62. Input Frequency: 47-63Hz. Inrush Current: Typ. 25A @ 230Vac. Input Current: Typ. 1.0A/115Vac, 0.5A/230Vac. Dielectric Withstand: Meet IEC 60950-1. EMI: Meet CISPR EN 55022 & FCC B. No Load Operation: No damage. Hold-up Time: 20mS @ 115Vac/ 110mS @ 230Vac. Earth Leakage: Less than 0.4mA @ 230Vac. OUTPUT SPECIFICATION Output Voltage: See Ratings Charts. Output Current: See Ratings Charts. Output Wattage: Typ. 60W continuous. Output Connector: Phoenix MSTBA2.5/2-G-5.08. Line Regulation: Typ. 0.1%. Load Regulation: Vary with output voltages. Typ. ±1.0%. Noise & Ripple: Typ. 1% peak to peak. OVP: Built-in. Adjustability: Available. LED Indicator: Installed. Overload Protection (OLP): Fully protected against output overload and short circuit. Typically set at 110-150% max. load. Consult the factory for special OLP setting. GENERAL SPECIFICATION Efficiency: Typ. 75%. Switching Frequency: Fixed frq. 50K Hz. Circuit Topology: Fixed frequency flyback circuit. Transient Response: Recovers in less than 3mS following a 25% load change. Safety Standard: IEC 60950-1/UL 60950-1 Class I. Power Density: 2.0Watts / Cubic Inch. Industrial Grade UL 508. Operating Temperature: -10 to +70°C. Derating from +60 °C to +70°C by derating 2%/°C. Storage Temperature: -25 to +85°C. Temperature Coefficient: Typ. 0.03% /°C. Cooling: Free air convection cooling for Ta. <+60°C. Moving air is required for Ta. >+60°C full load operation. Construction format: Enclosure metal box with DIN-clips format. Note: Due to requests in market and advances in technology, specifications subject to change without notification. Hitron Electronics Cororation. B4-11, P.O. Box 26-110 Kaohsiung Export Processing Zone Kaohsiung 806 Taiwan TEL: 886-7-8210410/FAX: 886-7-8419917, 886-7-8210511/E-mail: [email protected] /Web-site: www.hitron-e.com 1 Sep. 27, 2004 OUTPUT VOLTAGE / CURRENT RATINGS CHART SINGLE OUTPUT MAIN VO1 @ MODEL NO. Typ. Volt Peak HID60-S120050 5.0A 12.0V 5.6A HID60-S240025 2.5A 24.0V 2.8A HID60-S480012 1.2A 48.0V 1.4A Symbol: "@"Adjustable. "" OVP built-in for option. Remark: Peak load less than 60 sec. with duty cycle < 10%. MECHANICAL DIMENSIONS: MM [INCHES] WEIGHT: 500.5g (17.65 Oz.) INPUT & OUTPUT CONNECTORS PIN ASSIGNMENT AC INPUT ACAC-LINE NEUTRAL ASSIGNMENT P1-3 (L) P1-2 (N) CONNECTOR & PIN # Mating connector: P1: Phoenix GMSTB2.5/3-ST-7.62 P2: Phoenix MSTB2.5/2-ST-5.08. SINGLE OUTPUT ACGROUND P1-1(G) VO1 DC COM P2-2 (V1) P2-1 (COM) Hitron Electronics Cororation. B4-11, P.O. Box 26-110 Kaohsiung Export Processing Zone Kaohsiung 806 Taiwan TEL: 886-7-8210410/FAX: 886-7-8419917, 886-7-8210511/E-mail: [email protected] /Web-site: www.hitron-e.com 2 Sep. 27, 2004