HITRON HPD100

H HiTRON
UNIVERSAL AC INPUT HARMONIC CORRECTION
AC-DC INDUSTRIAL DIN-RAIL SINGLE OUTPUT 100 WATTS
SWITCHING MODE POWER SUPPLIES HPD100 SERIES
FEATURES:
ACCOMMODATE UNIVERSAL AC INPUT
MEET IEC 61000-3-2 HARMONIC CORRECTION
MEET UNIVERSAL SAFETY STANDARDS AND
INDUSTRIAL UL 508
INDUSTRIAL POWER SUPPLIES FOR
SNAP-ON MOUNTING ON DIN-RAILS
EMI MEET EN 55022 CLASS B
CE MARKING COMPLIANCE
SPECIFICATION
INPUT SPECIFICATION
OUTPUT SPECIFICATION
Input Voltage: Typ. 90-264Vac universal AC input.
Input Connector: Phoenix GMSTBA2.5/3-G-7.62.
Input Frequency: 47-63 Hz.
Inrush Current: Typ. 25A @230Vac.
Input Current: 1.1A @115Vac/ 0.55A @230Vac.
Dielectric Withstand: Meet IEC 60950-1.
EMI: Meet EN 55022/FCC Class B.
Power Factor Correction: Meet Harmonic Correction
per IEC 61000-3-2. PF typ. 0.96-0.98.
No Load Operation: No damage.
Hold-up Time: Typ. 46mS @115Vac & 230Vac.
Earth Leakage: Less than 0.70mA @ 230Vac.
Output Voltage: See Ratings Chart.
Output Current: See Ratings Chart.
Output Wattage: Typ. 100W continuous.
Output Connector: Phoenix MSTBA2.5/4-G-5.08.
Line Regulation: Typ. 0.1%.
Load Regulation: Typ. ±1.0-1.5%.
Noise & Ripple: Typ. 1.0% peak to peak.
OVP: Built-in.
Adjustment: Available.
LED Indicator: Installed.
Overload Protection (OLP):
Fully protected against output overload and short circuit.
Typically set at 120-130% max. load.
Consult the factory for special OLP setting.
GENERAL SPECIFICATION
Efficiency: Typ. 82%.
Switching Frequency: Fixed frq.66.6K Hz.
Circuit Topology: Fixed frequency forward circuit.
Transient Response: Recovers in less than 3mS following
a 25% load change.
Safety Standard: IEC 60950-1/UL 60950-1 Class I.
Power Density: 2.76 Watts / Cubic inch.
Industrial Grade UL 508.
Operating Temperature: -10 to +70°C. Derating from
+60°C to +70°C by derating 2%/°C.
Storage Temperature: -25 to +85°C.
Temperature Coefficient: Typ. 0.03% /°C.
Cooling: Free air convection cooling for Ta < +60°C.
Moving air is request for Ta > +60°C full load operation.
Construction format: Enclosure metal box format
with DIN-clips.
Note: Due to requests in market and advances in technology, specifications subject to change without notification.
In application
-35-
OUTPUT VOLTAGE/CURRENT RATINGS CHART
SINGLE OUTPUT
MODEL NO.
MAIN O/P @★
Typ.
Volt.
Peak
HPD100-S120084
8.4A
12.0V
9.6A
HPD100-S240042
4.2A
24.0V
4.8A
HPD100-S480021
2.1A
48.0V
2.4A
Symbol: "@" Adjustable. "★" OVP built-in.
Remark: Peak load less than 60 sec. With duty cycle < 10%.
MECHANICAL DIMENSIONS: MM [INCHES]
INPUT & OUTPUT CONNECTORS PIN ASSIGNMENTS
AC INPUT
ASSIGNMENT
AC-L
AC-N
AC-G
P1-3
P1-2
P1-1
CONNECTOR & PIN #
Mating connector: P1: Phoenix GMSTB2.5/3-ST-7.62
P2: Phoenix MSTB2.5/4-ST-5.08
SINGLE OUTPUT
VO1
DC-COM
P2-3, 4
P2-1, 2
-36-
WEIGHT: 670g (23.63 Oz.)