- HiTRON Electronics Corporation

H HiTRON
UNIVERSAL AC INPUT AC-DC INDUSTRIAL DIN-RAIL
SINGLE OUTPUT 120 WATTS SWITCHING MODE
POWER SUPPLIES HID125 SERIES
FEATURES:
 ACCOMMODATE UNIVERSAL AC SOURCES
 MEET UNIVERSAL SAFETY STANDARD
 INDUSTRIAL POWER SUPPLIES FOR
SNAP-ON MOUNTING ON DIN-RAILS
 EMI MEET CISPR PUB. 22 & FCC CLASS B
 CE MARKING COMPLIANCE
SPECIFICATION
INPUT SPECIFICATION
OUTPUT SPECIFICATION
Input Voltage: Typ. 90-264Vac.
Output Voltage: See Ratings Chart.
Output Current: See Ratings Chart.
Output Wattage: Typ. 120W continuous.
Output Connector: M-T plug connector.
Line Regulation: Typ. 0.1%.
Load Regulation: Typ. ±1.0-2.0%.
Noise & Ripple: Typ. 1% peak to peak.
OVP: Built-in. (Latch).
Adjustability: Available at VO1.
LED Indicator: Output indicating.
Overload Protection (OLP):
Fully protected against output overload and short circuit.
Typically set at 140% max. load.
Consult the factory for special OLP setting.
Input Connector: M-T plug connector.
Input Frequency: 47-63Hz.
Inrush Current: Typ. <30.5A @ 230Vac.
Input Current: 1.56A @115Vac, 0.86A @230Vac.
Dielectric Withstand: Meet IEC 60950-1.
EMI: Meet CISPR EN 55022 & FCC B.
No Load Operation: No damage.
Hold-up Time: Typ. 13mS @115Vac / 86mS @230Vac.
Earth Leakage: Typ. 0.65mA @230Vac.
GENERAL SPECIFICATION
Efficiency: Typ. 81-82%.
Switching Frequency: Fixed frq.62K Hz.
Circuit Topology: Fixed frequency Forward circuit.
Transient Response: Peak transient 14mV and recovers
within 2.93mS after 25% load change.
Safety Standard: IEC 60950-1/UL 60950-1 Class I.
Power Density: 2.0 Watts/ Cubic Inch.
Industrial Grade UL 508.
Operating Temperature: -10 to +70°C. Derating from
+60 °C to +70°C by derating 2%/°C.
Storage Temperature: -25 to +85°C.
Temperature Coefficient: Typ. 0.03% /°C.
Cooling: Convection cooling for Ta < +60°C.
Moving air is request for Ta >+ 60°C full load operation.
Construction format: Enclosure metal box with
DIN-clips format.
Note: Due to requests in market and advances in technology, specifications subject to change without notification.
Hitron Electronics Cororation. B4-11, P.O. Box 26-110 Kaohsiung Export Processing Zone Kaohsiung 806 Taiwan
TEL: 886-7-8210410/FAX: 886-7-8419917, 886-7-8210511/E-mail: [email protected] /Web-site: www.hitron-e.com
1
Oct. 24, 2011
OUTPUT VOLTAGE / CURRENT RATINGS CHART
SINGLE OUTPUT
MAIN VO1 @ 
MODEL NO.
Typ.
Volt.
Peak
HID125-S120100
10.0A
12.0V
12.0A
HID125-S240050
5.0A
24.0V
6.0A
HID125-S480025
2.5A
48.0V
3.0A
Symbol: "@"Adjustable. "" OVP built-in .
Remark: Peak load less than 60 sec. with duty cycle <10%.
MECHANICAL DIMENSIONS: MM [INCHES]
WEIGHT: 715.0g(25.2 Oz.)
INPUT & OUTPUT CONNECTORS PIN ASSIGNMENT
ASSIGNMENT
CNTR & PIN #
AC-LINE
P1-3(L)
AC INPUT
AC-NEUTRAL
P1-2(N)
AC-GROUND
P1-1(G)
SINGLE OUTPUT
VO1
DC COM
P2-3,4
P2-1,2
Hitron Electronics Cororation. B4-11, P.O. Box 26-110 Kaohsiung Export Processing Zone Kaohsiung 806 Taiwan
TEL: 886-7-8210410/FAX: 886-7-8419917, 886-7-8210511/E-mail: [email protected] /Web-site: www.hitron-e.com
2
Oct. 24, 2011