H HiTRON UNIVERSAL AC INPUT HARMONIC CORRECTION AC-DC INDUSTRIAL DIN-RAIL SINGLE OUTPUT 120 WATTS SWITCHING MODE POWER SUPPLIES HPD125 SERIES FEATURES: ACCOMMODATE UNIVERSAL AC INPUT MEET IEC 61000-3-2 HARMONIC CORRECTION MEET UNIVERSAL SAFETY STANDARDS AND INDUSTRIAL UL 508 INDUSTRIAL POWER SUPPLIES FOR SNAP-ON MOUNTING ON DIN-RAILS EMI MEET EN 55022 CLASS B CE MARKING COMPLIANCE SPECIFICATION INPUT SPECIFICATION OUTPUT SPECIFICATION Input Voltage: Typ. 90-264Vac with PFC. Output Voltage: See Ratings Charts. Output Current: See Ratings Charts. Output Wattage: Typ. 120W continuous. Output Connector: M-T plug connector. Line Regulation: Typ. 0.1%. Load Regulation: Typ. ± 0.5-1.0% Noise & Ripple: Typ. 1% peak to peak. OVP: Built-in. Adjustment: Available. LED Indicator: Installed. Overload Protection (OLP): Fully protected against output overload and short circuit. Typically set at 130% max. load. Consult the factory for special OLP setting. Input Connector: M-T plug connector. Input Frequency: 47-63Hz. Inrush Current: Typ. 26A @ 230Vac. Input Current: 1.35A @ 115Vac, 0.9A @ 230Vac. Dielectric Withstand: Meet IEC 60950-1. EMI: Meet EN 55022 & FCC Class B. Power Factor Correction: Meet Harmonic Correction per IEC 61000-3-2.PF typ.0.96-0.98. No Load Operation: No damage. Hold-up Time: Typ. 60mS @ 115Vac, 80mS @ 230Vac. Earth Leakage: Less than 0.60mA @ 230VAC. GENERAL SPECIFICATION Efficiency: Typ. 78%. Switching Frequency: Fixed frequency 72KHz. Circuit Topology: Fixed freq. forward circuit. Transient Response: Peak transient 68mV and recovers within 20mS after 25% load change. Safety Standard: IEC 60950-1/UL 60950-1 Class I. Power Density: 2.10Watts /Cubic Inch. Industrial Grade UL 508. Operating Temperature: -10 to +70°C. Derating from +60 to +70°C by derating 2%/°C. Storage Temperature: -25 to +100°C. Temperature Coefficient: Typ. 0.03% /°C. Cooling: Free air convection cooling for Ta < +60°C. Moving air is request for Ta >+ 60°C full load operation. Construction format: Enclosure metal box with DIN-clips format. Note: Due to requests in market and advances in technology, specifications subject to change without notification. In application -39- OUTPUT VOLTAGE / CURRENT RATINGS CHART SINGLE OUTPUT MAIN VO1 @★ MODEL NO. Typ. Volt. Peak HPD125-S120100 10.0A 12.0V 12.0A HPD125-S240050 5.0A 24.0V 6.0A HPD125-S480025 2.5A 48.0V 3.0A Symbol: "★" OVP built-in.. "@" Adjustable. Remark: Peak load less than 60sec. with duty cycle <10%. MECHANICAL DIMENSIONS: MM [INCHES] INPUT & OUTPUT CONNECTORS PIN ASSIGNMENT ASSIGNMENT CNTR & PIN # AC-L P1-3(L) AC INPUT AC-N AC-G P1-2(N) P1-1(G) SINGLE OUTPUT VO1 DC-COM P2-3,4 P2-1,2 -40- WEIGHT: 850.0g(29.98 Oz.)