LED High-Power Acorn Bulbs for Globe / Pendant Street

LED High-Power Acorn Bulbs for Globe/Pendant
Street & Walkway Lamps / Base Up
LED30HPS-600-SIW-00x-BU
Only 27 Watts – 100-to-277VAC Range – Warm White – E39 Mogul Base or E26 Edison Screw-in Base
Plug-in Replacement for HPS Lamps up to 150 Watts — Typical Mounting Height: 14-16 ft.
Warranty: 5 Years
■■
Low Power Consumed:
Only 27 Watts
■■
Wide Voltage Range:
100-277VAC
■■
Choice of Base: E39 or
E26 Screw-in
■■
Ventilated: Lamp
Assembly Feature Aids
in Maintaining CoolRunning Lamp
■■
Optimized Design:
LEDs Mounted to Provide
Maximum Luminance
at Desired Angles to
Targeted Area
■■
Optimized Circuitry:
Power Factor Corrected
for Maximum Efficiency
■■
Instant-On: No Delay in
Re-Strike
■■
Longer Life: White LEDs
Last for up to 50,000+
Hours
■■
Life Expectancy: 11.4
Years (12 Hrs/Day Basis)
■■
Solid-State: HighShock & High-Vibration
Resistant
■■
Reduces Light
Pollution: “Dark Skies”
Initiative-Compatible
■
Wide Ambient Oper.
Temp. Range:
~-22°F to ~+122°F
[~-30°C to ~+50°C]
■■
Safety Assurance: ETL
Listed (4001379)
LED30HPS-600-SIW-00x-BU
Emitted Color
Warm White
Color Temperature
2800K~3200K
Beam Pattern
Type V – Circular
■■
Washington
Globe Street
& Walkway
Lamps
■■
Enclosures
01.54”
[039.1mm]
Major Energy
Savings: Up to 85%
– LED Bulb Consumes
27 Watts vs 175 Watts
by HPS (150W Lamp &
16-25W Transformer)–A
Reduction of up to 125
Watts
■■
Longer Lifespan than
HPS or Other HID Lamps
■■
Maintenance-Free for
over 5 Years of Operation
– Lowers Costs by
Reducing Re-lamp
Frequency
■■
No Wasted Light:
Eliminates Light
Intrusion into Offices,
Residences, Stores...
■■
Enhances Vision:
Better Optical Acuity
– Little or No Glare as
Compared with High
Glare from HID Lamps
■■
No Ultraviolet
Emission: Does Not
Attract Insects
TOP VIEW
Input Current
0.235A
Power Factor
0.95
Total Lumens
2305 lm
Maximum Candela
450 cd
Efficacy
85 lm/W
Base Configuration
Vertically Up
LEDs
Facing Down
Weight
2.06 lbs / 0.9kg
12.11”
[307.5mm]
12.62”
[319mm]
4.04”
[102.6mm]
PART NUMBER
4.13”
[104.8mm]
BASE TYPE
DIMENSIONS (LxW)
LED30HPS-600-SIW-001-BU
E39 Mogul Screw
12.62”x4.04” (319.0x102.6mm)
LED30HPS-600-SIW-002-BU
E26 Edison Screw
12.11”x4.13” (307.5x104.8mm)
ISO
9001:2008
CERTIFIED by DNV
■OPTIONS
■■
Base Down Available,
with LEDs above Base
23105 Kashiwa Court, Torrance, CA 90505
Phone: (800) 579.4875 / (310) 534.1505
Fax: (310) 534.1424
E-mail: [email protected]
Website: http://www.ledtronics.com
Check LEDTRONICS.COM for latest data.
Printed material may be outdated.
27.5 Watts
LED30MH-600-TPW-002-BU
Energy Used
2.33”
[59.1mm]
LED30MH-600-TPW-001-BU
100-277 VAC [Tested @ 120VAC]
1.00”
[25.3mm]
LOG #365 / Rev6-2015
■■
01.02”
[025.9mm]
1.73”
[43.9mm]
2.80”
[71.1mm]
~55°@ 50° from vertical
Input Voltage
© 2015 LEDtronics, Inc.
■BENEFITS
Ideal for Use with
Alternate or Renewable
Energy Resources
– Solar & Wind Power
SPECIFICATIONS SUBJECT
TO CHANGE WITHOUT NOTICE
PART NO.
(Full Beam Width
@ 50% Intensity)
■APPLICATIONS
COMPLIANT
■SPECIFICATIONS
Viewing Angle
Utility Patents
US 8,128,258 B2
US 8,157,416 B2
US 7,862,204 B
Design Patent
US D631,567 S
LED30HPS-600-SIW-001-BU
E39 Base
SIDE VIEW
■■
White LED
technology is
patent protected in
the United States.
LEDtronics white
LED products are
covered under
these patents.
w w w. L E D t r o n ic s. co m
■FEATURES
CAUTION
w w w. L E D t r o n ic s. co m
Ideal for Use with Alternate
or Renewable Energy Resources
– Solar & Wind Power
LED30HPS-600-SIW-001-BU
When Installing Lamps in Potentially
Corrosive Outdoor Environments
LEDtronics suggests that a silicone moisture-barrier
sealant be used to protect the metal-threaded base of
the LED bulb.
Sealant is highly recommended for all outdoorenvironment LED bulb installations to prevent water
and/or moisture incursion that can lead to premature
degradation of the bulb base and eventual bulb failure.
This is especially recommended for LED bulb
installations near saltwater bodies.
Dow Corning Molykote® 111 Valve Lubricant and Sealant
is a high-temperature, moisture-resistant, silicone grease.
If liberally applied to the clean surface of the lamp socket
and the base of the lamp itself, it will provide moisture
and corrosion resistance.
AVAILABLE
OPTION:
LED30HPS-600-SIW-002-BU
NOTE
If a ballast is present and used
by an old preexisting lamp, the
ballast needs to be bypassed
for the LED lamp
(Operating Voltage
100-277 VAC).
ARRA Compliant
USA Made Product
© 2015 LEDtronics, Inc.
Page 2
LED High-Power Bulbs for Post-Top
Street & Walkway Luminaires / Base Up