LED High-Power Bulbs for Decorative Post-Top Street & Walkway Luminaires / Base Down LED30HPS-600-SIW-00x Only 27 Watts – 100-to-277VAC Range – Warm White – E39 Mogul Base or E26 Edison Screw-in Base Plug-in Replacement for HPS Lamps up to 150 Watts — Typical Mounting Height: 10-12 ft. ■ Warranty: 5 Years ■ ■ Low Power Consumed: Only 27 Watts Longer Life: White LEDs Last for up to 50,000+ Hours ■ Instant-On: No Delay in Re-Strike ■ Wide Voltage Range: 100277VAC ■ Lab Tested in Accordance with IES Standards ■ Ventilated: Lamp Assembly Feature Aids in Maintaining CoolRunning Lamp ■ Solid-State: High-Shock & HighVibration Resistant Optimized Design: LEDs Are Mounted to Provide Maximum Luminance at Desired Angles ■ ■ Reduces Light Pollution: “Dark Skies” Initiative-Compatible ■ Wide Ambient Oper. Temp. Range: ~-22°F to ~+122°F [~-30°C to ~+50°C] ■ Safety Assurance: ETL Listed ■ Optimized Circuitry: Power Factor Corrected for Maximum Efficiency LED30HPS-600-SIW-001 E39 Base Utility Patents US 8,128,258 B2 US 8,157,416 B2 US 7,862,204 B Design Patent US D631,567 S LED30HPS-600-SIW-002 E26 Base ■APPLICATIONS ■ ■BENEFITS Washington Globe Street & Walkway Lamps ■ Enclosures Major Energy Savings: Up to 85% – Consumes Only 27 Watts vs 175 Watts by HPS (150W Lamp & 16-25W Transformer) – Up to 125W Reduction ■SPECIFICATIONS SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE ■ Longer Lifespan than HPS or Other HID Lamps Emitted Color Warm White Color Temperature 2800K~3200K Beam Pattern Type V – Circular ■ Maintenance-Free for over 5 Years of Operation – Lowers Costs by Reducing Re-lamp Frequency ■ No Wasted Light: Eliminates Light Intrusion into Residences, Offices, Stores ■ Enhances Vision: Better Optical Acuity – Little or No Glare as Compared with High Glare from HID Lamps ■ No Ultraviolet Emission: Does Not Attract Insects 4.13” [104.8mm] TOP VIEW ~40°@ 50° from vertical Input Voltage 100-277 VAC [Tested @ 120VAC] Energy Used 27.5 Watts Input Current 0.236A Power Factor 0.97 Total Lumens 2,303 lm Maximum Candela 544 cd SIDE VIEW (Full Beam Width @ 50% Intensity) 4.13” [104.8mm] LED30MH-600-SIW-001 LED30HPS-600-SIW-00x LED30HPS-600-SIW-002 PART NO. 12.54” [319mm] 12.11” [307.5mm] 2.33” [59.1mm] 2.70” [68.6mm] 1.00” [25.3mm] 01.02” [025.9mm] 01.54” [039.1mm] 84 lm/W Base Configuration Vertically Down PART NUMBER BASE TYPE DIMENSIONS (LxW) LEDs Facing Down LED30HPS-600-SIW-001 E39 Mogul Screw 12.54”x4.13” (319x104.8mm) Weight 2.06 lbs / 0.9kg LED30HPS-600-SIW-002 E26 Edison Screw 12.11”x4.13” (307.5x104.8mm) © 2015 LEDtronics, Inc. ISO 9001:2008 CERTIFIED by DNV ■OPTIONS ■ Base Up Available, with LEDs Below Base 23105 Kashiwa Court, Torrance, CA 90505 Phone: (800) 579.4875 / (310) 534.1505 Fax: (310) 534.1424 E-mail: [email protected] Website: ledtronics.com Check LEDTRONICS.COM for latest data. Printed material may be outdated. Efficacy LOG 364 / Rev 05-2015 ■ Ideal for Use with Alternate or Renewable Energy Resources – Solar & Wind Power Viewing Angle w w w. L E D t r o n ic s. co m White LED technology is patent protected in the United States. LEDtronics white LED products are covered under these patents. ■FEATURES CAUTION AVAILABLE OPTION: LED30HPS-600-SIW-002 ARRA Compliant USA Made Product If a ballast is present and used by an old preexisting lamp, the ballast needs to be bypassed for the LED lamp (Operating Voltage 100-277 VAC). © 2015 LEDtronics, Inc. w w w. L E D t r o n ic s. co m LED30HPS-600-SIW-001 When Installing Lamps in Potentially Corrosive Outdoor Environments LEDtronics suggests that a silicone moisture-barrier sealant be used to protect the metal-threaded base of the LED bulb. Sealant is highly recommended for all outdoorenvironment LED bulb installations to prevent water and/or moisture incursion that can lead to premature degradation of the bulb base and eventual bulb failure. This is especially recommended for LED bulb installations near saltwater bodies. Dow Corning Molykote® 111 Valve Lubricant and Sealant is a high-temperature, moisture-resistant, silicone grease. If liberally applied to the clean surface of the lamp socket and the base of the lamp itself, it will provide moisture and corrosion resistance. NOTE Page 2 LED High-Power Bulbs for Decorative Post-Top-Style Street & Walkway Luminaires / Base Down