Tempus CBC 20 Connector System ITT Industries, Cannon ... providing a comprehensive offering of connectivity solutions. In addition to our comprehensive offering of connector products, we provide a complete line of electronic components and solutions. Top/side actuated tacts Low profile SMT Navigation/scrolling switches Long life key switches Toggle, rocker, pushbutton, DIP, slide, snap, switchlock, rotary, thumbwheel SIM, full card, media and memory card configurations Performance metal plating and inlays Pick-and-place and IP65 compatible “Spoon” shaped landing or friction contacts enhance interconnect performance and minimize damage from debris, mis-inserts and vandalism. Rubber and In Mold Decoration (IMD) products Wide range of cosmetic options Integration of decorated and metalized plastic keytops Multiple PILL and contact options Precision molded polymeric solutions Metal or poly dome switch arrays Modular assembly options include: ESD shielding, keypads, EL backlighting, rigid or flexible circuits Complete design, engineering and test capabilities Low, mid and high volume production capabilities From multi-function grips to sophisticated control systems, hall effect products and front panel assemblies Electronics and software engineering development Worldwide design and manufacturing High-mix production capabilities Global sourcing and supply chain management Tempus CBC 20 2 mm Interconnect Introduction Contents The Industry Standard General Data Electrical Data Mechanical Data System Overview Female Signal Modules, Solder Female Signal Modules, Pressfit Female Power Modules, Solder Female Power Modules, Pressfit Male Signal Modules Solder Male Signal Modules, Wide Wall Pressfit Male Power Modules, Wide Wall Solder / Pressfit Male Right-Angle Signal Modules, Wide Wall Female Signal Modules, Pressfit Female Signal Modules, Pressfit/Solder Male Signal Modules, Solder Male Signal Modules, Pressfit Male Power Modules, Pressfit/Solder Male Right-Angle Signal Module Male Right-Angle Power Module Male Right-Angle Power/Signal Combined Female Straight Power Module Shrouds Hybrid Modules Guide Pin / Socket Cable Connectors, 4 Row Coding System Custom Monoblocks Typical Futurebus+ Standard Monoblocks Design Notes Application Tool Overview Backplane Assembly Press Blocks, Support Blocks Right Angle Connectors Pushfit Press-in Tool Shroud Assembly Backplane Repair Cable Connector Assembly Product Safety Information 2 3 4 5 6 7 9 11 13 15 19 With the growth of system circuit size combined with the requirement to manipulate larger amounts of data at greater speeds, bus systems and their interconnect components are being pushed to their limits by the latest microprocessors. The restrictions imposed by using the DIN 41612 connector and existing bus architecture are now becoming evident. The electronics industry also accepts the requirements to obey metric dimensional practices for future generations of components and equipment. 23 26 28 30 32 37 Cannon have responded to meet these requirements - the result is TEMPUS CBC 20, a two part modular plug and receptacle connector system. TEMPUS CBC 20 is suitable for a variety of equipment ranging from laptops to mainframes, custom miniature packaging to telecom systems. There are high density connectors already on the market at present but none have been designed with such a system approach in mind and therefore the ability to expand as required by technology. TEMPUS CBC 20 contacts are laid out in four and more rows on a 2 mm pitch rather than three rows on a 0.1 inch pitch. This gives the designer the facillity of 240 I/O lines in the same area previously occupied by a 96 way DIN 41612 style connector. Using TEMPUS as opposed to DIN 41612 connectors 456 and more rather than 192 signal positions may be obtained on a double euroboard, over twice as many I/O lines, giving the ability to address large bus widths. 46 49 51 Benefits 53 55 57 59 60 62 64 66 67 68 71 • Designed to conform with International specifications IEC 61076-4-104, IEE P896 Futurebus+, IEC 917 metric modular order • End-to-End stackable with no loss of positions • High performance contacts, 75 76 78 79 80 81 82 83 84 high Hertz stress • 4 and 5 row high density connections with 2 mm x 2 mm circuit grid • Push-fit peg at receptacles and rightangle males eliminate heatstaking and problems associated with this process • Customized monoblock styles can be produced in economically valid quantities • High temperature materials, not affected by solder processes • Solder and press-fit terminations are available • Modular design for signal and power connectors • Sequential mating provides live insertion capability • Bellcore / CSA / UL approved • Produced under ISO 9001 Quality Management System Dimensions are shown mm (inch) Dimensions subject to change 1 www.ittcannon.com Tempus CBC 20 2 mm Interconnect Industry Standard • designed to conform with connector Live Insertion Capability specifications IEC61076-4-104, • signal and power pins are available EIAis64 and CECC draft 75101-810. in various lengths and positions within the connector modules • designed to conform with the Power Handling system build specifications of IEC917, IEEE1301 and IEEE1301.1 • power modules available for 3 and 40 Amps, suitable for backplane internal power planes or bus-bar • selected as the interconnection power levels system for Futurebus+, general computer, input/output and telecom True Modular System profiles and Scalabe Coherent Interface • the ability to mix signal and power with no loss of signal position with the easy addition of coax, fibre • qualified within major computer, optics and other features telecom and backplane manufacturers throughout America, Europe, Japan and the Pacific rim • flexible mix of technology and features allows freedom in design • standardisation guarantees multisourcing and compatibility with third Monoblock Capability party equipment • to complement the modular system signals, power and other features 2mm Pitch are available within a single block for ease of application and a • the optimum connector pitch with lowering of cost in volume reference to price and performance, applications greater contact density with no large increase in board and assembly costs • unique modular mould tools allow custom connectors at attractive High I/O prices • provides over twice the signal pin availability of DIN41612 on a double Low Cost Application eurocard • pushfit pegs on plug-in board mounted modules as an alternative to the standardised heat stake. • on a double eurocard: TEMPUS Simple and fast application with “flat can provide 456 contacts (4 row) or rock“ type tooling 570 contacts (5 row), for reference DIN41612 provides 192 contacts • full application tool support for small Optimum Performance to large volumes and connector repair • 45° legform for mechanical stability and shortest stub length and highest Choice of Application and signal speed Termination • high I/O allows practical inclusion of • solder and pressfit termination on backplane and circuit board ground return patterns for optimal mounted connectors signal integrity • for high speed, 640 Mbits/s, signal rise times typically ten times faster than VMEbus with low crosstalk • high temperature materials allow use within surface mount assembly environments • pressfit contacts with pushfit pegs for fast application in mass production High Performance Contacts • High hertz stress design for high reliability • low insertion force (approximately half of DIN 41612 per signal contact) • high cycle rate at low cost, 1000 cycles minimum as standard Polarisaton polarised by design • Coding coding with no loss of contact positions • Total System Capability • signal • power • high power • coaxial • guiding pins • guiding with early ground • cable • shrouds • right angle males • coding • fibre optics • backplane extension • shielding Dimensions are shown mm (inch) Dimensions subject to change 2 www.ittcannon.com Tempus CBC 20 2 mm Interconnect General Data TEMPUS is a reverse system with the male pin contacts mounted on the backplane and the female socket contacts mounted on the daughtercard. Contact Pitch 2,00 x 2,00 (.079 x .079) Standard Module Arrangement and Size Number of Contacts Layouts Module Length 24 signal 4x6 12,00 (.470) 48 signal 4 x 12 24,00 (.940) 4 x 24 48,00 (1.890) 4 x 48 5x6 96,00 (3.780) 12,00 (.470) 5 x 12 24,00 (.940) 5 x 24 48,00 (1.890) 5 x 48 96,00 (3.780) 4x2 5x2 12,00 (.470) 12,00 (.470) 96 signal 192 signal 30 signal 60 signal 120 signal 240 signal 8 power 10 power Standard Contact Mating Length mm(inches) Signal 5,00 (.197) Power 6,50 (.256) 5,75 (.226) 7,25 (.285) 6,50 (.256) 8,00 (.315) 7,25 (.285) 8,00 (.315) Contact Arrangement Insulator Material Flammability Rating Contact Materials and Plating Plating Options Contact Area Termination Finish Refer to relevant connector design notes, all arrangements are standardised in accordance with IEC, EIA and IEEE specifications. High Temperature Thermoplastic LCP (liquid crystal polymer) or PPS UL 94V-0 CuSn6 (phosphor bronze) on female solder and press-fit CuSn (phosphor bronze) on male press-fit / solder Brass on male solder Palladium Nickel plus Gold over Nickel base Tin lead solder Test Data Overview Full test reports are available upon request. The following lists the IEC specification requirements. Dimensions are shown mm (inch) Dimensions subject to change 3 www.ittcannon.com Tempus CBC 20 2 mm Interconnect Electrical Data Current rating (ambient temperature) Signal Contacts Power Contacts 1,50 A / 25°C, 1,00 A / 70°C 4,00 A / 25°C, 3,00 A / 70°C Contact Resistance Signal Row A Row B Row C Row D Row E < 25 mΩ < 35 mΩ < 40 mΩ < 50 mΩ < 50 mΩ Power all rows < 10 mΩ Insulation Resistance Test Voltage 500 V dc > 5000 MΩ Voltage Proof (IEC 512-2 test 40 method A) Capacitance Between lines Between one line all other surrounded Inductance Between adjacent Lines Propagation Delay 1000 V ac Frequency 1MHz, 1ns risentime, mated connectors < 2pF < 3pF 1 ns risetime, 50 Ω reference impedance < 35 nH 500 ps risetime, 50 Ω reference impedance Propagation Delay < 225 ps Skew Row-to-Row < 40 ps Cross Talk Signal Near End Cross talk 1 ns risetime, 50Ω reference impedance, 2:1 grounded pattern < 5% Dimensions are shown mm (inch) Dimensions subject to change 4 www.ittcannon.com Tempus CBC 20 2 mm Interconnect Mechanical Data Compliant Section Press-in Force Push-out Force (pressfit male into backplane) 100 N max. (22 lbf.) 20 N min. (4,50 lbf.) Contacts Signal Contacts Insertion Force < 0,45 N / contact (45,90 gram / contact) Withdrawal Force ≥ 0,15 N / contact (15,30 gram / contact) Power Contacts Insertion Force Withdrawal Force < 1,50 N / contact (153 gram / contact) ≥ 0,30 N / contact (127,50 gram / contact) Normal Force 0,60 N nom. (61 gram / contact) Approvals 4 row UL E8572 CSA LR85691 Bellcore EIA class 1.2 (pending) Hertz Stress 4 row 1200 MPa (174 klbf / sq. in) Dimensions are shown mm (inch) Dimensions subject to change 5 www.ittcannon.com Tempus CBC 20 2 mm Interconnect System Overview Shrouds Hybrid Modules Coaxial Module High Power Module Guide Modules Ground (e.s.d.) System Signal Modules Male Right-Angle Signal Modules Female 4 row solder 4 row press-fit 5 row solder Cable Connectors Signal Modules Male 4 row 5 row Power Modules Male 4 row wide wall 4 row narrow wall Power Modules Female Monoblocks Coding System Dimensions are shown mm (inch) Dimensions subject to change 6 www.ittcannon.com Tempus CBC 20 2 mm Interconnect Female Signal Modules - Solder Termination - 4 Row Features • • Designed to conform with IEC61076-4-104, EIAis64, IEEE P896 Futurebus+, IEEE P1596 SCI and IEC 917 metric modular order Stackable with other TEMPUS modules, with no loss of positions • Heat stake or pushfit peg retention • High performance contacts, high hertz stress, 1000 cycles minimum • 45° tails for mechanical stability and electrical performance • High I/O, 20 contacts per linear centimetre (51 contacts per linear inch) • High temperature materials, not affected by reflow solder process Technical Data Mechanical Data Contact Pitch Polarisation Coding Housing Material Termination Termination p.t.h. Board Retention Contact Material Hertz Stress Class 1 Plating Insertion Force Withdrawal Force 2,00 x 2,00 (.079 x .079) By design With coding keys, see page 64 Liquid Crystal Polymer, UL94V-0 or PPS UL94V-0 Solder tail, tin / lead plated ø 0,60 (.024), refer to page 73 Pushfit peg or heat stake Phosphor bronze 1200 MPa (174 klbf / sq. in.) 1000 cycles minimum Palladium Nickel plus Gold over Nickel 0,45 N (1.6 oz) max. per contact 0,15 N (0,5 oz) min. per contact Electrical Data Current Rating Withstanding Voltage Insulation Resistance Contact Resistance 1,50 A at 25°C, 1A at 70°C 1000 Vrms Initial: 5000MΩ, after climatic test: 1000 MΩ 45 mΩ maximum Dimensions are shown mm (inch) Dimensions subject to change 7 www.ittcannon.com Tempus CBC 20 2 mm Interconnect Female Signal Modules - Solder Termination - 4 Row Push-fit Peg Version * Heat Stake Version 24 Contacts Recommended PCB Hole Pattern, Component Side 48 Contacts 96 Contacts 192 Contacts After Heat Stake * Refer to Design Notes on page 73 for circuit board drill and hole plating details. No. of Contacts 24 Part Numbers* Pushfit Peg Heat Stake CBC20P00-024FDS1-0-1-002 CBC20P00-024FDS1-0-1 Board Thickness A 1,60 (.063) 10,00 (.394) B 11,95 (.470) 48 96 192 24 48 96 192 CBC20Q00-048FDS1-0-1-002 CBC20R00-096FDS1-0-1-002 CBC20S00-192FDS1-0-1-002 CBC20P00-024FDS2-0-1-002 CBC20Q00-048FDS2-0-1-002 CBC20R00-096FDS2-0-1-002 CBC20S00-192FDS2-0-1-002 1,60 1,60 1,60 2,40 2,40 2,40 2,40 23,95 (.943) 47,95 (1,888) 95,95 (3.778) 11,95 (.470) 23,95 (.943) 47,95 (1.888) 95,95 (3.778) CBC20Q00-048FDS1-0-1 CBC20R00-096FDS1-0-1 CBC20S00-192FDS1-0-1 CBC20P00-024FDS2-0-1 CBC20Q00-048FDS2-0-1 CBC20R00-096FDS2-0-1 CBC20S00-192FDS2-0-1 (.063) (.063) (.063) (.094) (.094) (.094) (.094) 22,00 46,00 94,00 10,00 22,00 46,00 94,00 (.866) (1,811) (3.701) (.394) (.866) (1.811) (3.701) * Part numbers in blue letters typeface indicate high runner products: usually available with shorter lead times. Packaging Quantity All part numbers shown refer to connectors supplied in trays. For connectors supplied in tubes add the designation-VR to the end of the part number. Note: Minimum order quantities apply Contact in Tube 24 44 48 22 96 11 192 5 Performance 1000 mating cycles Dimensions are shown mm (inch) Dimensions subject to change 8 www.ittcannon.com Tempus CBC 20 2 mm Interconnect Female Signal Modules - Press Fit Termination - 4 Row Features • • Designed to conform with IEC 61076-4-104, EIAis64, IEEE P896 Futurebus+, IEEE P1596 SCI and IEC 917 metric modular order Stackable with other TEMPUS modules, with no loss of positions • Push fit retention • High performance contacts, high hertz stress, 1000 cycles minimum • • High I/O, 20 contacts per linear centimetre (51 contacts per linear inch) • High temperature materials, not affected by reflow solder 45° tails for mechanical stability and electrical performance Technical Data Mechanical Data Contact Pitch Polarisation Coding Housing Material Termination Termination p.t.h. Board Retention Contact Material Hertz Stress Class 1 Plating Insertion Force Withdrawal Force 2,00 x 2,00 (.079 x .079) By design With coding key, see page 64 Liquid Crystal Polymer, UL94V-0 or PPS, UL94V-0 Eye of the needle compliant section, tin/lead plated ø 0,70 (.028) refer to page 73 Pushfit peg Phosphor Bronze 1200 MPa (174 klbf / sq. in.) 1000 cycles minimum Palladium Nickel plus Gold over Nickel 0,45 N (1.6 oz) max. per contact 0,15 N (0,5 oz) min. per contact Electrical Data Current Rating Withstanding Voltage Insulation Resistance Contact Resistance 1,50 A at 25°C, 1 A at 70°C 1000 Vrms Initial: 5000MΩ, after climatic test: 1000 MΩ 45 mΩ maximum Dimensions are shown mm (inch) Dimensions subject to change 9 www.ittcannon.com Tempus CBC 20 2 mm Interconnect Female Signal Modules - Pressfit Termination - Pushfit Retention - 4 Row Recommended PCB Hole Pattern, Component Side 24 Contacts 48 Contacts Detail Press-fit 96 Contacts 192 Contacts No. of Contacts 24 48 Part Number A B CBC20P00-024FDP1-0-1-002 CBC20Q00-048FDP1-0-1-002 10,00 (.394) 22,00 (.866) 96 192 CBC20R00-096FDP1-0-1-002 CBC20S00-192FDP1-0-1-002 46,00 (1.811) 47,95 (1.888) 94,00 (.3.701) 95,95 (3.778) 11,95 (.470) 23,95 (.943) Availability consult Cannon consult Cannon consult Cannon Planned Packaging Quantity Contact All part numbers shown in this publication refer to connectors supplied in trays. For connectors supplied in tubes add the designation -VR to the end of the part number. Note: In Tube 24 44 48 22 96 11 192 5 Minimum order quantities apply Long pushfit peg (-002) enables fast assembly of the connector to the circuit board. Pushfit peg (-002) is designed to work with wide wall male modules and narrow wall modules incorporating a slot. A short pushfit peg is available to work with narrow wall modules without a slot (replace -002 with -001). Performance 1000 mating cycles Dimensions are shown mm (inch) Dimensions subject to change 10 www.ittcannon.com Tempus CBC 20 2 mm Interconnect Female Power Modules - Solder Termination - 4 Row Features • • Designed to conform with IEC 48b237, EIAis64, IEEE P896 Futurebus+, IEEE P1596 SCI and IEC 917 metric modular order • Heat Stake or pushfit peg retention • High temperature materials, not affected by reflow solder process • High performance contacts, high hertz stress, 1000 cycles minimum • 45° legform for optimum mechanical and electrical performance Stackable with other TEMPUS modules, with no loss of positions • High I/O, eight contacts in a 12 mm module Technical Data Mechanical Data Contact Pitch Polarisation Coding Housing Material Termination 2,00 x 2,00 (.079 x .079) By design With coding key, see page 64 Liquid Crystal Polymer, UL94V-0 or PPS, UL94V-0 Solder tail, tin / lead plated Termination p.t.h. Board Retention ø 0,60 (.024), refer to page 73 Pushfit peg or heat stake Contact Material Hertz Stress Class 1 Plating Insertion Force Withdrawal Force Phosphor bronze 1200 MPa (174 klbf / sq. in.) 1000 cycles minimum Palladium Nickel plus Gold over Nickel 1,50 N (5,3 oz) max. per contact 0,30 N (1,0 oz) min. per contact Electrical Data Current Rating Withstanding Voltage Insulation Resistance Contact Resistance 4,00 A at 25°C, 3,00A at 70°C 1000 Vrms Initial: 5000MΩ, after climatic test: 1000 MΩ 25 mΩ maximum Dimensions are shown mm (inch) Dimensions subject to change 11 www.ittcannon.com Tempus CBC 20 2 mm Interconnect Female Power Modules - Solder Termination - 4 Row Push Fit Peg Version 8 Contacts Recommended PCB Hole Pattern, Component Side After Hot Rivetting No. of Contacts 8 8 Part Numbers* Pushfit Peg CBC20T00-008FDS1-0-1-002 CBC20T00-008FDS2-0-1-002 Heat Stake CBC20T00-008FDS1-0-1 CBC20T00-008FDS2-0-1 Board Thickness 1,60 (.063) 2,40 (.094) * Part numbers in blue letters typeface indicate high runner products: usually available with shorter lead times. Packaging Quantity All part numbers shown refer to connectors supplied in trays. For connectors supplied in tubes add the designation -VR to the end of the part number. Note: Minimum order quantities apply Contact In Tube 8 44 Performance 1000 mating cycles Dimensions are shown mm (inch) Dimensions subject to change 12 www.ittcannon.com Tempus CBC 20 2 mm Interconnect Female Power Modules - Press Fit Termination - 4 Row Features • • Designed to conform with IEC 61076-4-104, EIAis64, IEEE P896 Futurebus+, IEEE P1596 SCI and IEC 917 metric modular order • Press fit with push fit retention, solder with heat stake or push fit • 45° tails for mechanical stability and electrical performance • High performance contacts, high hertz stress, 1000 cycles minimum • High temperature materials, not affected by reflow solder process Stackable with other TEMPUS modules, with no loss of positions Technical Data Mechanical Data Contact Pitch Polarisation Coding Housing Material Termination Press Fit Termination p.t.h. Board Retention Contact Material Hertz Stress Class 1 Plating Insertion Force Withdrawal Force 2,00 x 2,00 (.079 x .079) By design With coding key, see page 64 Liquid Crystal Polymer, UL94V-0 or PPS, UL94V-0 Eye of the needle compliant section, tinlead plated ø 0,70 (.028) refer to page 73 Pushfit peg Phosphor Bronze 1200 MPa (174 klbf / sq. in.) 1000 cycles minimum Palladium Nickel plus Gold over Nickel 1,50 N (1.6 oz) max. per contact 0,30 N (0,5 oz) min. per contact Electrical Data Current Rating Withstanding Voltage Insulation Resistance Contact Resistance 4,00 A at 25°C, 3,00 A at 70°C 1000 Vrms Initial: 5000MΩ, after climatic test: 1000 MΩ 25 mΩ maximum Dimensions are shown mm (inch) Dimensions subject to change 13 www.ittcannon.com Tempus CBC 20 2 mm Interconnect Female Power Modules - Press Fit Termination - 4 Row 11,95 (.470) 6,0 (.236) 9,3 (.366) 2,00 (.079) 6,0 (.236) 8 Contacts 9,5 (.374) 4,0 (.157) Recommended PCB Hole Pattern, Component Side 3,65 (.144) 2,0 (.079) 4,0 (.157) 21,0 (.827) 6,0 (.236) 1,5 (.059) 2,0 (.079) 2,05 (.081) 12, (.472) 3,0 (.118) 1,0 (.039) 4,0 (.157) Contacts Order Number Packaging Units PCB Thickness Board Retention 8 CBC20T00-008FDP1-0-1-002-VR 44 >1,60 (.063) push fit peg Dimensions are shown mm (inch) Dimensions subject to change 14 www.ittcannon.com Tempus CBC 20 2 mm Interconnect Male Signal Modules - Solder Termination - 4 Row Features • • Designed to conform with IEC61076-4-104, EIAis64, IEEE P896 Futurebus+, IEEE P1596 SCI and IEC 917 metric modular order • Sequential mating provides live insertion capability • High temperature materials, not affected by reflow solder process • High performance contacts, high hertz stress, 1000 cycles minimum • Wide wall design for system tolerant 2,50 (.098) out-of-centre board insertion Stackable with other TEMPUS modules, with no loss of positions • High I/O, 20 contacts per linear centimetre (51 contacts per linear inch) Technical Data Mechanical Data Contact Pitch Polarisation Coding Housing Material Termination Termination p.t.h. Board Guiding Left to Right Top to Bottom Board Slot Pitch Contact Material Hertz Stress Class 1 Plating Insertion Force Withdrawal Force 2,00 x 2,00 (.079 x .079) By design With coding key, see page 64 Liquid Crystal Polymer, UL94V-0 or PPS, UL94V-0 Solder tail, tin / lead plated ø 0,60 (.024), refer to page 73, 0,50 - 0,80 (.025 - 0,31) 2,50 - 2,50 (.100 - .100) 1,50 - 1,50 (.060 - .060) 16,00 (.630) min. Brass 1200 MPa (174 klbf / sq. in.) 1000 cycles minimum Palladium Nickel plus Gold over Nickel 0,45 N (1.6 oz) max. per contact 0,15 N (0,5 oz) min. per contact Electrical Data Current Rating Withstanding Voltage Insulation Resistance Contact Resistance 1,50 A at 25°C, 1,00 A at 70°C 1000 Vrms Initial: 5000MΩ, after climatic test: 1000 MΩ 45 mΩ maximum Dimensions are shown mm (inch) Dimensions subject to change 15 www.ittcannon.com Tempus CBC 20 2 mm Interconnect Male Signal Modules - Solder Termination - 4 Row Recommended PCB Hole Pattern, Component Side 24 Contacts 48 Contacts 96 Contacts 192 Contacts No. of Contacts A B 24 10,00 (.394) 11,95 (.470) 48 22,00 (.866) 23,95 (.943) 96 46,00 (1.811) 47,95 (1.888) 192 94,00 (3.701) 95,95 (3.778) Dimensions are shown mm (inch) Dimensions subject to change 16 www.ittcannon.com Tempus CBC 20 2 mm Interconnect Male Signal Modules - Solder Termination - 4 Row No. of Contacts Part Number * Board Thickness 24 CBC20A00-024WDS1-1-1 3,20 (.125) 5,00 (.197) 5,00 (.197) 5,00 (.197) 5,00 (.197) 24 24 24 24 24 CBC20A00-024WDS1-2-1 CBC20A00-024WDS1-3-1 CBC20A00-024WDS1-4-1 CBC20A00-024WDS1-5-1 CBC20A00-02WDS1-8-1 3,20 3,20 3,20 3,20 3,20 6,50 6,50 7,25 6,50 5,75 5,00 5,75 6,50 6,50 7,25 5,00 5,75 6,50 6,50 5,75 5,00 6,50 7,25 6,50 5,75 24 CBC20A00-024WDS2-1-1 2,40 (.094) 5,00 (.197) 5,00 (.197) 5,00 (.197) 5,00 (.197) 24 24 24 24 24 48 48 48 48 48 48 48 CBC20A00-024WDS2-2-1 CBC20A00-024WDS2-3-1 CBC20A00-024WDS2-4-1 CBC20A00-024WDS2-5-1 CBC20A00-024WDS2-8-1 CBC20B00-048WDS1-1-1 CBC20B00-048WDS1-2-1 CBC20B00-048WDS1-3-1 CBC20B00-048WDS1-4-1 CBC20B00-048WDS1-5-1 CBC20B00-048WDS1-8-1 CBC20B00-048WDS2-1-1 2,40 2,40 2,40 2,40 2,40 3,20 3,20 3,20 3,20 3,20 3,20 2,40 (.094) (.094) (.094) (.940) (.094) (.125) (.125) (.125) (.125) (.125) (.125) (.094) 6,50 6,50 7,25 6,50 5,75 5,00 6,50 6,50 7,25 6,50 5,75 5,00 (.256) (.256) (.285) (.256) (.226) (.197) (.256) (.256) (.285) (.256) (.226) (.197) 5,00 5,75 6,50 6,50 7,25 5,00 5,00 5,75 6,50 6,50 7,25 5,00 (.197) (.226) (.256) (.256) (.285) (.197) (.197) (.226) (.256) (.256) (.285) (.197) 5,00 5,75 6,50 6,50 5,75 5,00 5,00 5,75 6,50 6,50 5,75 5,00 ( .197) (.226) (.256) (.256) (.226) (.197) (.197) (.226) (.256) (.256) (.226) (.197) 5,00 6,50 7,25 6,50 5,75 5,00 5,00 6,50 7,25 6,50 5,75 5,00 (.197) (.256) (.285) (.256) (.226) (.197) (.197) (.256) (.285) (.256) (.226) (.197) 48 48 48 48 CBC20B00-048WDS2-2-1 CBC20B00-048WDS2-3-1 CBC20B00-048WDS2-4-1 CBC20B00-048WDS2-5-1 2,40 2,40 2,40 2,40 (.094) (.094) (.094) (.094) 6,50 6,50 7,25 6,50 (.256) (.256) (.285) (.256) 5,00 5,75 6,50 6,50 (.197 (.226) (.256) (.256) 5,00 5,75 6,50 6,50 (.197) (.226) (.256) (.256) 5,00 6,50 7,25 6,50 (.197) (.256) (.285) (.256) 48 96 96 96 96 96 96 96 96 96 96 96 96 192 192 192 192 CBC20B00-048WDS2-8-1 CBC20C00-096WDS1-1-1 CBC20C00-096WDS1-2-1 CBC20C00-096WDS1-3-1 CBC20C00-096WDS1-4-1 CBC20C00-096WDS1-5-1 CBC20C00-096WDS1-8-1 CBC20C00-096-WDS2-1-1 CBC20C00-096WDS2-2-1 CBC20C00-096WDS2-3-1 CBC20C00-096WDS2-4-1 CBC20C00-096WDS2-5-1 CBC20C00-096WDS2-8-1 CBC20D00-192WDS1-1-1 CBC20D00-192WDS1-2-1 CBC20D00-192WDS1-3-1 CBC20D00-192WDS1-4-1 2,40 3,20 3,20 3,20 3,20 3,20 3,20 2,40 2,40 2,40 2,40 2,40 2,40 3,20 3,20 3,20 3,20 (.094) (.125) (.125) (.125) (.125) (.125) (.125) (.094) (.094) (.094) (.094) (.094) (.094) (.125) (.125) (.125) (.125) 5,75 5,00 6,50 6,50 7,25 6,50 5,75 5,00 6,50 6,50 7,25 6,50 5,75 5,00 6,50 6,50 7,25 (.226) (.197) (.256) (.256) (.285) (.256) (.226) (.197) (.256) (.256) (.285) (.256) (.226) (.197) (.256) (.256) (.285) 7,25 5,00 5,00 5,75 6,50 6,50 7,25 5,00 5,00 5,75 6,50 6,50 7,25 5,00 5,00 5,75 6,50 (.285) (.197) (.197) (.226) (.256) (.256) (.285) (.197) (.197) (.226) (.256) (.256) (.285) (.197) (.197) (.226) (.256) 5,75 5,00 5,00 5,75 6,50 6,50 5,75 5,00 5,00 5,75 6,50 6,50 5,75 5,00 5,00 5,75 6,50 (.226) (.197) (.197) (.226) (.256) (.256) (.226) (.197) (.197) (.226) (.256) (.256) (.226) (.197) (.197) (.226) (.256) 5,75 5,00 5,00 6,50 7,25 6,50 5,75 5,00 5,00 6,50 7,25 6,50 5,75 5,00 5,00 6,50 7,25 (.226) (.197) (.197) (.256) (285) (.256) (.226) (.197) (.197) (.256) (.285) (.256) (.226) (.197) (.197) (.256) (285) (.125) (.125) (.125) (.125) (.125) Contact Arrangement Row b c d a (.256) (.256) (.285) (.256) (.226) (.197) (.226) (.256) (.256) (.285) (.197) (.226) (.256) (.256) (.226) (.197) (.256) (.285) (.256) (.226) (Continued on next page) * Part numbers in blue letters typeface indicate high runner products: usually available with shorter lead times. Dimensions are shown mm (inch) Dimensions subject to change 17 www.ittcannon.com Tempus CBC 20 2 mm Interconnect No. of Contacts Part Number * Board Thickness 192 CBC20D00-192WDS1-5-1 3,20 (.125) 6,50 (.256) 6,50 (.256) 6,50 (.256) 6,50 (.256) 192 192 CBC20D00-192WDS1-8-1 CBC20D00-192WDS2-1-1 3,20 (.125) 2,40 (.094) 5,75 (.226) 5,00 (.197) 7,25 (.285) 5,00 (.197) 5,75 (.226) 5,00 (.197) 5,75 (.226) 5,00 (.197) 192 192 CBC20D00-192WDS2-2-1 CBC20D00-192WDS2-3-1 2,40 (.094) 2,40 (.094) 6,50 (.256) 6,50 (.256) 5,00 (.197) 5,75 (.226) 5,00 (.197) 5,75 (.226) 5,00 (.197) 6,50 (.256) 192 192 CBC20D00-192WDS2-4-1 CBC20D00-192WDS2-5-1 2,40 (.094) 2,40 (.094) 7,25 (.285) 6,50 (.256) 6,50 (.256) 6,50 (.256) 6,50 (.256) 6,50 (.256) 7,25 (.285) 6,50 (.256) 192 CBC20D00-192WDS2-8-1 2,40 (.094) 5,75 (.226) 7,25 (.285) 5,75 (.226) 5,75 (.226) a Contact Arrangement Row b c d * Part numbers in blue letters typeface indicate high runner products: usually available with shorter lead times. Packaging Quantity All part numbers shown refer to connectors supplied in trays. For connectors supplied in tubes add the designation-VR to the end of the part number. Contact In Tube In Tray 24 44 330 48 22 165 96 11 75 192 5 30 Note: Minimum order quantities apply Performance 1000 mating cycles min Dimensions are shown mm (inch) Dimensions subject to change 18 www.ittcannon.com Tempus CBC 20 2 mm Interconnect Male Signal Modules - Wide Wall - Pressfit Termination - 4 Row Features • • Designed to conform with IEC61076-4-104, EIAis64, IEEE P896 Futurebus+, IEEE P1596 SCI and IEC 917 metric modular order • Sequential mating provides live insertion capability • High temperature materials, not affected by reflow solder process • High performance contacts, high hertz stress, 1000 cycles minimum • Wide wall design for system tolerant 2,50 (.098) out-of-centre board insertion Stackable with other TEMPUS modules, with no loss of positions • High I/O, 20 contacts per linear centimetre (51 contacts per linear inch) Technical Data Mechanical Data Contact Pitch Polarisation Coding Housing Material Termination Termination p.t.h. Board Guiding Left to Right Top to Bottom Board Slot Pitch Contact Material Hertz Stress Class 1 Plating Insertion Force Withdrawal Force 2,00 x 2,00 (.079 x .079) By design With coding key, see page 64 Liquid Crystal Polymer, UL94V-0 or PPS, UL94V-0 Eye of needle compliant section, tin/lead plated ø 0,70 (.028), refer to page 73 2,50 - 2,50 (.100 - .100) 1.50 - 1,50 (.060 - .060) 16,00 (.630) min. Phosphor bronze 1200 MPa (174 klbf / sq. in.) 1000 cycles minimum Palladium Nickel plus Gold over Nickel 0,45 N (1.6 oz) max. per contact 0,15 N (0,5 oz) min. per contact Electrical Data Current Rating Withstanding Voltage Insulation Resistance Contact Resistance 1,50 A at 25°C; 1,00 A at 70°C 1000 Vrms Initial: 5000MΩ; after climatic test: 1000 MΩ 45 mΩ maximum Dimensions are shown mm (inch) Dimensions subject to change 19 www.ittcannon.com Tempus CBC 20 2 mm Interconnect Male Signal Modules - Wide Wall - Pressfit Termination - 4 Row Recommended PCB Hole Pattern, Component Side 24 Contacts 48 Contacts 96 Contacts 192 Contacts Part numbers* No. of Contacts A 24 10.00 (.394) 11,95 (.470) 48 22,00 (.866) 23,95 (.943) 96 46,00 (1.811) 47,95 (1.888) 192 94,00 (3.701) 95,95 (3.778) B No. of Contacts 24 24 24 24 24 Termination CBC20A00-024WDP1-1-1 CBC20A00-024WDP1-2-1 CBC20A00-024WDP1-3-1 CBC20A00-024WDP1-4-1 CBC20A00-024WDP1-5-1 Press-fit, Press-fit, Press-fit, Press-fit, Press-fit, 24 24 CBC20A00-024WDP1-8-1 CBC20A00-024WDU1-1-1 Press-fit, 4,30 (.169) tail Press-fit, 13,60 (.535) tail 4,30 4,30 4,30 4,30 4,30 (.169) (.169) (.169) (.169) (.169) tail tail tail tail tail a 5,00 6,50 6,50 7,25 6,50 Contact Arrangement Row b c (.197) 5,00 (.197) 5,00 (.197) (.256) 5,00 (.197) 5,00 (.197) (.256) 5,75 (.226) 5,75 (.226) (.285) 6,50 (.256) 6,50 (.256) ( .256) 6,50 (.256) 6,50 (.256) d 5,00 5,00 6,50 7,25 6,50 (.197) (.197) (.256) (.285) (.256) 5,75 (.226) 7,25 (.285) 5,75 (.226) 5,75 (.226) 5,00 (.197) 5,00 (.197) 5,00 (.197) 5,00 (.197) (Continued on next page) * Part numbers in blue letters typeface indicate high runner products: usually available with shorter lead times. Dimensions are shown mm (inch) Dimensions subject to change 20 www.ittcannon.com Tempus CBC 20 2 mm Interconnect Male Signal Modules - Wide Wall - Pressfit Termination - 4 Row No. of Contacts 24 24 Part numbers* Termination CBC20A00-024WDU1-2-1 CBC20A00-024WDU-1-3-1 Press-fit, 13,60 (.535) tail Press-fit, 13,60 (.535) tail Contact Arrangement Row a b c d 6,50 (.256) 5,00 (.197) 5,00 (.197) 5,00 (.197) 6,50 (.256) 5,75 (.226) 5,75 (.226) 6,50 (.256) 24 24 CBC20A00-024WDU1-4-1 CBC20A00-024WDU1-5-1 Press-fit, 13,60 (.535) tail Press-fit, 13,60 (.535) tail 7,25 (.285) 6,50 (.256) 6,50 (.256) 7,25 (.285) 6,50 (.256) 6,50 (.256) 6,50 (.256) 6,50 (.256) 24 CBC20A00-024WDU1-8-1 Press-fit, 13,60 (.535) tail 5,75 (.226) 7,25 (.285) 5,75 (.226) 5,75 (.226) 24 24 24 CBC20A00-024WDV2-1-1 CBC20A00-024WDV2-2-1 CBC20A00-024WDV2-3-1 Press-fit, 17,00 (.669) tail Press-fit, 17,00 (.669) tail Press-fit, 17,00 (.669) tail 5,00 (.197) 5,00 (.197) 5,00 (.197) 5,00 (.197) 6,50 (.256) 5,00 (.197) 5,00 (.197) 5,00 (.197) 6,50 (.256) 5,75 (.226) 5,75 (.226) 6,50 (.256) 24 24 24 48 CBC20A00-024WDV2-4-1 CBC20A00-024WDV2-5-1 CBC20A00-024WDV2-8-1 CBC20B00-048WDP1-1-1 Press-fit, Press-fit, Press-fit, Press-fit, 7,25 6,50 5,75 5,00 48 48 48 CBC20B00-048WDP1-2-1 CBC20B00-048WDP1-3-1 CBC20B00-048WDP1-4-1 Press-fit, 4,30 (.169) tail Press-fit, 4,30 (.169) tail Press-fit, 4,30 (.169) tail 6,50 (.256) 5,00 (.197) 5,00 (.197) 5,00 (.197) 6,50 (.256) 5,75 (.226) 5,75 (.226) 6,50 (.256) 7,25 (.285) 6,50 (.256) 6,50 (.256) 7,25 (.285) 48 48 48 CBC20B00-048WDP1-5-1 CBC20B00-048WDP1-8-1 CBC20B00-048WDU1-1-1 Press-fit, 4,30 (.169) tail Press-fit, 4,30 (.169) tail Press-fit, 13,60 (.535) tail 6,50 (.256) 6,50 (.256) 6,50 (.256) 6,50 (.256) 5,75 (.226) 7,25 (.285) 5,75 (.226) 5,75 (.226) 5,00 (.197) 5,00 (.197) 5,00 (.197) 5,00 (.197) 48 48 48 48 48 48 CBC20B00-048WDU1-2-1 CBC20B00-048WDU1-3-1 CBC20B00-048WDU1-4-1 CBC20B00-048WDU1-5-1 CBC20B00-048WDU1-8-1 CBC20B00-048WDV2-1-1 Press-fit, Press-fit, Press-fit, Press-fit, Press-fit, Press-fit, 13,60 13,60 13,60 13,60 13,60 17,00 (.535) (.535) (.535) (.535) (.535) (.669) tail tail tail tail tail tail 6,50 6,50 7,25 6,50 5,75 5,00 (.256) (.256) (.285) (.256) (.226) (.197) 5,00 5,75 6,50 6,50 7,25 5,00 (.197) (.226) (.256) (.256) (.285) (.197) 5,00 5,75 6,50 6,50 5,75 5,00 (.197) (.226) (.256) (.256) (.226) (.197) 5,00 6,50 7,25 6,50 5,75 5,00 (.197) (.256) (.285) (.256) (.226) (.197) 48 48 48 48 CBC20B00-048WDV2-2-1 CBC20B00-048WDV2-3-1 CBC20B00-048WDV2-4-1 CBC20B00-048WDV2-5-1 Press-fit, Press-fit, Press-fit, Press-fit, 17,00 17,00 17,00 17,00 (.669) (.669) (.669) (.669) tail tail tail tail 6,50 6,50 7,25 6,50 (.256) (.256) (.285) (.256) 5,00 5,75 6,50 6,50 (.197) (.226) (.256) (.256) 5,00 5,75 6,50 6,50 (.197) (.226) (.256) (.256) 5,00 6,50 7,25 6,50 (.197) (.256) (.285) (.256) 48 96 CBC20B00-048WDV2-8-1 CBC20C00-096WDP1-1-1 Press-fit, 17,00 (.669) tail Press-fit, 4,30 (.169) tail 5,75 (.226) 7,25 (.285) 5,75 (.226) 5,75 (.226) 5,00 (.197) 5,00 (.197) 5,00 (.197) 5,00 (.197) 96 96 96 96 96 96 96 CBC20C00-096WDP1-2-1 CBC20C00-096WDP1-3-1 CBC20C00-096WDP1-4-1 CBC20C00-096WDP1-5-1 CBC20C00-096WDP1-8-1 CBC20C00-096WDU1-1-1 CBC20C00-096WDU1-2-1 Press-fit, 4,30 (.169) tail Press-fit, 4,30 (.169) tail Press-fit, 4,30 (.169) tail Press-fit, 4,30 (.169) tail Press-fit, 4,30 (.169) tail Press-fit, 13,60 (.535) tail Press-fit, 13,60 (.535) tail 6,50 (.256) 6,50 (.256) 7,25 (.285) 6,50 (.256) 5,75 (.226) 5,00 (.197) 6,50 (.256) 17,00 (.669) tail 17,00 (.669) tail 17,00 (.669) tail 4,30 (.169) tail (.285) (.256) (.226) (.197) 6,50 6,50 7,25 5,00 (.256) (.256) (.285) (.197) 5,00 (.197) 5,75 (.226) 6,50 (.256) 6,50 (.256) 7,25 (.285) 5,00 (.197) 5,00 (.197) 6,50 6,50 5,75 5,00 (.256) (.256) (.226) (.197) 5,00 (.197) 5,75 (.226) 6,50 (.256) 6,50 (.256) 5,75 (.226) 5,00 (.197) 5,00 (.197) 7,25 6,50 5,75 5,00 (.285) (.256) (.226) (.197) 5,00 (.197) 6,50 (.256) 7,25 (.285) 6,50 (.256 5,75 (.226) 5,00 (.197) 5,00 (.197) (Continued on next page) * Part numbers in blue letters typeface indicate high runner products: usually available with shorter lead times. Dimensions are shown mm (inch) Dimensions subject to change 21 www.ittcannon.com Tempus CBC 20 2 mm Interconnect Male Signal Modules - Wide Wall - Pressfit Termination - 4 Row No. of Contacts Part numbers* Termination Contact Arrangement Row b c d a 96 CBC20B00-096WDU1-3-1 Press-fit, 13,60 (.535) tail 6,50 (.256) 5,75 (.226) 5,75 (.226) 6,50 (.256) 96 CBC20B00-096WDU1-4-1 Press-fit, 13,60 (.535) tail 7,25 (.285) 6,50 (.256) 6,50 (.256) 7,25 (.285) 96 96 CBC20B00-096WDU1-5-1 CBC20B00-096WDU1-8-1 Press-fit, 13,60 (.535) tail Press-fit, 13,60 (.535) tail 6,50 (.256) 6,50 (.256) 6,50 (.256) 5,75 (.226) 7,25 (.285) 5,75 (.226) 6,50 (.256) 5,75 (.226) 96 CBC20B00-096WDV2-1-1 Press-fit, 17,00 (.669) tail 5,00 (.197) 5,00 (.197) 5,00 (.197) 5,00 (.197) 96 96 96 CBC20B00-096WDV2-2-1 CBC20B00-096WDV2-3-1 CBC20B00-096WDV2-4-1 Press-fit, 17,00 (.669) tail Press-fit, 17,00 (.669) tail Press-fit, 17,00 (.669) tail 6,50 (.256) 5,00 (.197) 5,00 (.197) 6,50 (.256) 5,75 (.226) 5,75 (.226) 7,25 (.285) 6,50 (.256) 6,50 (.256) 5,00 (.197) 6,50 (.256) 7,25 (.285) 96 CBC20B00-096WDV2-5-1 Press-fit, 17,00 (.669) tail 6,50 (.256) 6,50 (.256) 6,50 (.256) 6,50 (.256) 96 192 192 CBC20B00-096WDV2-8-1 CBC20B00-192WDP1-1-1 CBC20B00-192WDP1-2-1 Press-fit, 17,00 (.669) tail Press-fit, 4,30 (.169) tail Press-fit, 4,30 (.169) tail 5,75 (.226) 7,25 (.285) 5,75 (.226) 5,00 (.197) 5,00 (.197) 5,00 (.197) 6,50 (.256) 5,00 (.197) 5,00 (.197) 5,75 (.226) 5,00 (.197) 5,00 (.197) 192 192 192 192 192 192 CBC20B00-192WDP1-3-1 CBC20B00-192WDP1-4-1 CBC20B00-192WDP1-5-1 CBC20B00-192WDP1-8-1 CBC20B00-192WDU1-1-1 CBC20B00-192WDU1-2-1 Press-fit, Press-fit, Press-fit, Press-fit, Press-fit, Press-fit, 4,30 (.169) tail 4,30 (.169) tail 4,30 (.169) tail 4,30 (.169) tail 13,60 (.535) tail 13,60 (.535) tail 6,50 7,25 6,50 5,75 5,00 6,50 (.256) (.285) (.256) (.226) (.197) (.256) 5,75 6,50 6,50 7,25 5,00 5,00 (.226) (.256) (.256) (.285) (.197) (.197) 5,75 6,50 6,50 5,75 5,00 5,00 (.226) (.256) (.256) (.226) (.197) (.197) 6,50 7,25 6,50 5,75 5,00 5,00 (.256) (.285) (.256) (.226) (.197) (.197) 192 192 192 192 192 192 192 192 192 192 CBC20B00-192WDU1-3-1 CBC20B00-192WDU1-4-1 CBC20B00-192WDU1-5-1 CBC20B00-192WDU1-8-1 CBC20B00-192WDV2-1-1 CBC20B00-192WDV2-2-1 CBC20B00-192WDV2-3-1 CBC20B00-192WDV2-4-1 CBC20B00-192WDV2-5-1 CBC20B00-192WDV2-8-1 Press-fit, Press-fit, Press-fit, Press-fit, Press-fit, Press-fit, Press-fit, Press-fit, Press-fit, Press-fit, 13,60 13,60 13,60 13,60 17,00 17,00 17,00 17,00 17,00 17,00 6,50 7,25 6,50 5,75 5,00 6,50 6,50 7,25 6,50 5,75 (.256) (.285) (.256) (.226) (.197) (.256) (.256) (.285) (.256) (.226) 5,75 6,50 6,50 7,25 5,00 5,00 5,75 6,50 6,50 7,25 (.226) (.256) (.256) (.285) (.197) (.197) (.226) (.256) (.256) (.285) 5,75 6,50 6,50 5,75 5,00 5,00 5,75 6,50 6,50 5,75 (.226) (.256) (.256) (.226) (.197) (.197) (.226) (.256) (.256) (.226) 6,50 7,25 6,50 5,75 5,00 5,00 6,50 7,25 6,50 5,75 (.256) (.285) (.256 (.226) (.197) (.197) (.256) (.285) (.256) (.226) (.535) (.535) (.535) (.535) (.669) (.669) (.669) (.669) (.669) (.669) tail tail tail tail tail tail tail tail tail tail * Part numbers in blue letters typeface indicate high runner products: usually available with shorter lead times. Packaging Quantity Performance 1000 mating cycles min. Note: Minimum order quantities apply Contacts In Tube In Tray 24 44 330 48 22 165 96 11 75 192 5 30 All part numbers shown refer to connectors supplied in trays. For connectors supplied in tubes add the designation -VR to the end of the part number. Performance 1000 mating cycles min. Dimensions are shown mm (inch) Dimensions subject to change 22 www.ittcannon.com Tempus CBC 20 2 mm Interconnect Male Power Modules - Wide Wall - Solder or Pressfit Termination - 4 Row Features • Designed to conform with IEC61076-4-104, EIAis64, IEEE P896 Futurebus+, IEEE P1596 SCI and IEC 917 metric modular order • Stackable with other TEMPUS modules, with no loss of positions • Sequential mating provides live insertion capability • High temperature materials, not affected by reflow solder process • High performance contacts, high hertz stress, 1000 cycles minimum • Wide wall design for system tolerant 2,50 (.098) out-of-centre board insertion • High I/O, eight power contacts in a 12 mm module Technical Data Mechanical Data Contact Pitch Polarisation Coding Housing Material Termination Solder Termination p.t.h. (solder) Termination Press-fit Termination p.t.h. (press-fit) Board Guiding Left to Right Top to Bottom Board Slot Pitch Contact Material Hertz Stress Class 1 Plating Insertion Force Withdrawal Force 2,00 x 2,00 (.079 x .079) By design With coding key, see page 64 Liquid Crystal Polymer, UL94V-0 or PPS, UL94V-0 Solder tail, tin/lead plated ø 0,60 (.024) Eye of needle compliant section, tin/lead plated ø 0,70 (.028), refer to page 73 2,50 - 2,50 (.100 - .100) 1,50 - 1,50 (.060 - .060) 16,00 (.630) min. Press-fit contact: Phosphor bronze, Solder contact: Brass 1200 MPa (174 klbf / sq. in.) 1000 cycles minimum Palladium Nickel plus Gold over Nickel 1,50 N (5,3 oz) max. per contact 0,30 N (1,0 oz) min. per contact Electrical Data Current Rating Withstanding Voltage Insulation Resistance Contact Resistance 4,00 A at 25°C, 3,00 A at 70°C 1000 Vrms Initial: 5000MΩ, after climatic test: 1000 MΩ 25 mΩ maximum Dimensions are shown mm (inch) Dimensions subject to change 23 www.ittcannon.com Tempus CBC 20 2 mm Interconnect Male Power Modules - Wide Wall - Solder or Pressfit Termination - 4 Row Recommended P.C.B. Hole Pattern, Component Side Recommended P.C.B. Hole Pattern, Component Side Refer to design notes on page 73 for circuit board drill and hole plating details. Dimensions are shown mm (inch) Dimensions subject to change 24 www.ittcannon.com Tempus CBC 20 2 mm Interconnect Male Power Modules - Wide Wall - Solder or Pressfit Termination - 4 Row No. of Part Number* Contacts 8 CBC20J00-008WDP1-4-1 Termination Press-fit 4,30 (.169) Tail Contact Arrangement Row a b c d 7,25 (.285) 6,50 (.256) 6,50 (.256) 7,25 (.285) 8 8 8 CBC20J00-008WDP1-5-1 CBC20J00-008WDP1-6-1 CBC20J00-008WDP1-7-1 Press-fit 4,30 (.169) Tail Press-fit 4,30 (.169) Tail Press-fit 4,30 (.169) Tail 6,50 (.256) 6,50 (.256) 6,50 (.256) 6,50 (.256) 8,00 (.315) 8,00 (.315) 7,25 (.285) 6,50 (.256) 6,50 (.256) 8,00 (.315) 6,50 (.256) 6,50 (.256) 8 8 CBC20J00-008WDU1-4-1 CBC20J00-008WDU1-5-1 Press-fit 13,60 (.535) Tail Press-fit 13,60 (.535) Tail 7,25 (.285) 6,50 (.256) 6,50 (.256) 7,25 (.285) 6,50 (.256) 6,50 (.256) 6,50 (.256) 6,50 (.256) 8 8 CBC20J00-008WDU1-6-1 CBC20J00-008WDU1-7-1 Press-fit 13,60 (.535) Tail Press-fit 13,60 (.535) Tail 8,00 (.315) 8,00 (.315) 7,25 (.285) 6,50 (.256) 6,50 (.256) 8,00 (.315) 6,50 (.256) 6,50 (.256) 8 CBC20J00-008WDV2-4-1 Press-fit 17,00 (.669) Tail 7,25 (.285) 6,50 (.256) 6,50 (.256) 7,25 (.285) 8 8 8 CBC20J00-008WDV2-5-1 CBC20J00-008WDV2-6-1 CBC20J00-008WDV2-7-1 Press-fit 17,00 (.669) Tail Press-fit 17,00 (.669) Tail Press-fit 17,00 (.669) Tail 6,50 (.256) 6,50 (.256) 6,50 (.256) 6,50 (.256) 8,00 (.315) 8,00 (.315) 7,25 (.285) 6,50 (.256) 6,50 (.256) 8,00 (.315) 6,50 (.256) 6,50 (.256) 8 8 CBC20J00-008WDS1-4-1 CBC20J00-008WDS1-5-1 Solder Tail for 3,20 (.125) Board Solder Tail for 3,20 (.125) Board 7,25 (.285) 6,50 (.256) 6,50 (.256) 7,25 (.285) 6,50 (.256) 6,50 (.256) 6,50 (.256) 6,50 (.256) 8 8 8 CBC20J00-008WDS1-6-1 CBC20J00-008WDS1-7-1 CBC20J00-008WDS2-4-1 Solder Tail for 3,20 (.125) Board Solder Tail for 3,20 (.125) Board Solder Tail for 2,40 (.094) Board 8,00 (.315) 8,00 (.315) 7,25 (.285) 6,50 (.256) 6,50 (.256) 8,00 (.315) 6,50 (.256) 6,50 (.256) 7,25 (.285) 6,50 (.256) 6,50 (.256) 7,25 (.285) 8 8 CBC20J00-008WDS2-5-1 CBC20J00-008WDS2-6-1 Solder Tail for 2,40 (.094) Board Solder Tail for 2,40 (.094) Board 6,50 (.256) 6,50 (.256) 6,50 (.256) 6,50 (.256) 8,00 (.315) 8,00 (.315) 7,25 (.285) 6,50 (.256) 8 CBC20J00-008WDS2-7-1 Solder Tail for 2,40 (.094) Board 6,50 (.256) 8,00 (.315) 6,50 (.256) 6,50 (.256) * Part numbers in blue letters typeface indicate standard products: usually available with shorter lead times. Packaging Quantity All part numbers shown refer to connectors supplied in trays. For connectors supplied in tubes add the designation -VR to the end of the part number. Contact 8 In Tube In Tray 44 330 Note: Minimum order quantities apply Performance 1000 mating cycles min Dimensions are shown mm (inch) Dimensions subject to change 25 www.ittcannon.com Tempus CBC 20 2 mm Interconnect Female Signal Modules - Solder Termination - 5 Row Features • • Designed to conform with IEC61076-4-104, EIAis64, IEEE P896 Futurebus+, IEEE P1596 SCI and IEC 917 metric modular order Stackable with other TEMPUS modules, with no loss of positions • Heatstake or push fit retention • High performance contacts, high hertz stress, 1000 cycles minimum • 45° tails for mechanical stability and electrical performance • High I/O, 25 contacts per linear centimetre (63 contacts per linear inch) • High temperature materials, not affected by reflow solder Technical Data Mechanical Data Contact Pitch Polarisation Coding Housing Material Termination Termination p.t.h. Board Retention Contact Material Hertz Stress Class 1 Plating Insertion Force Withdrawal Force 2,00 x 2,00 (.079 x .079) By design With coding key, see page 64 Liquid Crystal Polymer, UL94V-0 or PPS, UL94V-0 Solder tail, tin/lead plated ø 0,60 (.024) refer to page 73 Pushfit peg or heat stake Phosphor Bronze 1200 MPa (174 klbf / sq. in.) 1000 cycles minimum Palladium Nickel plus Gold over Nickel 0,45 N (1.6 oz) max. per contact 0,15 N (0,5 oz) min. per contact Electrical Data Current Rating Withstanding Voltage Insulation Resistance Contact Resistance 1,50 A at 25°C; 1 A at 70°C 1000 Vrms Initial: 5000MΩ; after climatic test: 1000 MΩ 45 mΩ maximum Dimensions are shown mm (inch) Dimensions subject to change 26 www.ittcannon.com Tempus CBC 20 2 mm Interconnect Female Signal Modules - Solder Termination - 5 Row 11,94 (.470) 10,00 (.394) 6 1 Recommended PCB Hole Pattern, Component Side 30 Contacts 8,00 (.315) 9,50 4,00 (.374) (.157) 2,00 (.079) 06,00 (.024) 8,00 2,00 (.315) (.079) 23,95 (.943) 12 1 1,50 (.059) 60 Contacts 2,00 (.079) 23,00 (.906) 4,00 (.157) 3,00 (.118) 1,00 (.039) 4,00 (.157) 2,05 (.081) 12,00 (.472) 47,95 (1.888) 24 120 Contacts 95,95 (3.778) 1 48 240 Contacts Refer to design notes page 73 for circuit board drill and hole plating details. Contacts Order Number Packaging Units PCB Thickness Board Retention 30 CBC20K00-030FDS1-0-1-002-VR 44 >1,60 (.063) push fit peg 30 CBC20K00-030FDS2-0-1-002-VR 44 2,40 (.094) push fit peg 30 CBC20K00-030FDS1-0-1-VR 44 1,60 (.063) heat stake 30 CBC20K00-030FDS2-0-1-VR 44 2,40 (.094) heat stake 60 CBC20K00-060FDS1-0-1-002-VR 22 1,60 (.063) push fit peg 60 CBC20K00-060FDS2-0-1-002-VR 22 2,40 (.094) push fit peg 60 CBC20K00-060FDS1-0-1-VR 22 1,60 (.063) heat stake 60 CBC20K00-060FDS2-0-1-VR 22 2,40 (.094) heat stake 120 CBC20K00-120FDS1-0-1-002-VR 11 1,60 (.063) push fit peg 120 CBC20K00-120FDS2-0-1-002-VR 11 2,40 (.094) push fit peg 120 CBC20K00-120FDS1-0-1-VR 11 1,60 (.063) heat stake 120 CBC20K00-120FDS2-0-1-VR 11 2,40 (.094) heat stake 240 CBC20K00-240FDS1-0-1-002-VR 5 1,60 (.063) push fit peg 240 CBC20K00-240FDS2-0-1-002-VR 5 2,40 (.094) push fit peg 240 CBC20K00-240FDS1-0-1-VR 5 1,60 (.063) heat stake CBC20K00-240FDS2-0-1-VR 5 2,40 (.094) heat stake 240 Dimensions are shown mm (inch) Dimensions subject to change 27 www.ittcannon.com Tempus CBC 20 2 mm Interconnect Female Signal Modules - Press Fit Termination - 5 Row Features • • Designed to conform with IEC61076-4-104, EIAis64, IEEE P896 Futurebus+, IEEE P1596 SCI and IEC 917 metric modular order Stackable with other TEMPUS modules, with no loss of positions • Push fit retention • High performance contacts, high hertz stress, 1000 cycles minimum • • High I/O, 25 contacts per linear centimetre (63 contacts per linear inch) • High temperature materials, not affected by reflow solder 45° tails for mechanical stability and electrical performance Technical Data Mechanical Data Contact Pitch Polarisation Coding Housing Material Termination Termination p.t.h. Board Retention Contact Material Hertz Stress Class 1 Plating Insertion Force Withdrawal Force 2,00 x 2,00 (.079 x .079) By design With coding key, see page 64 Liquid Crystal Polymer, UL94V-0 or PPS, UL94V-0 Eye of the needle compliant section, tin/lead plated ø 0,70 (.028) refer to page 73 Pushfit peg Phosphor Bronze 1200 MPa (174 klbf / sq. in.) 1000 cycles minimum Palladium Nickel plus Gold over Nickel 0,45 N (1.6 oz) max. per contact 0,15 N (0,5 oz) min. per contact Electrical Data Current Rating Withstanding Voltage Insulation Resistance Contact Resistance 1,50 A at 25°C, 1 A at 70°C 1000 Vrms Initial: 5000MΩ, after climatic test: 1000 MΩ 45 mΩ maximum Dimensions are shown mm (inch) Dimensions subject to change 28 www.ittcannon.com Tempus CBC 20 2 mm Interconnect Female Signal Modules - Press Fit Termination - 5 Row 23,00 (.906) 10,00 (.394) 6 1 1,50 (.059) 11,30 (.445) 2,00 (.079) 8,00 (.315) Recommended PCB Hole Pattern Component Side 11,95 (.470) 4,00 (.157) 2,00 (.079) 30 Contacts 9,50 (.374) 1 4,00 (.157) 8,00 (.315) Location Peg 23,95 (.943) 12 1 2,05 (.081) 60 Contacts 3,65 (.144) 2,90 (.114) 0,8 (.032) 0,60 (.024) 12,00 (.472) 4,00 (.157) 3,00 (.118) Pushfit Peg 24 47,95 (1.888) 1 120 Contacts 95,95 (3.778) 48 1 240 Contacts Refer to design notes page 73 for circuit board drill and hole plating details. Contacts Order Number 30 CBC20K00-030FDP1-0-1-002-VR 44 >1,60 (.063) push fit peg 60 CBC20K00-060FDP1-0-1-002-VR 22 >1,60 (.063) push fit peg 120 CBC20K00-120FDP1-0-1-002-VR 11 >1,60 (.063) push fit peg CBC20K00-240FDP1-0-1-002-VR 5 >1,60 (.063) push fit peg 240 Packaging Units PCB Thickness Board Retention Dimensions are shown mm (inch) Dimensions subject to change 29 www.ittcannon.com Tempus CBC 20 2 mm Interconnect Female Power Modules - Press Fit/Solder Termination - 5 Row Features • • Designed to conform with IEC61076-4-104, EIAis64, IEEE P896 Futurebus+, IEEE P1596 SCI and IEC 917 metric modular order • Press fit with push fit retention, solder with heat stake or push fit • 45° tails for mechanical stability and electrical performance • High performance contacts, high hertz stress, 1000 cycles minimum • High temperature materials, not affected by reflow solder process Stackable with other TEMPUS modules, with no loss of positions Technical Data Mechanical Data Contact Pitch Polarisation Coding Housing Material Termination Termination p.t.h. (solder) Termination p.t.h. (press fit) Termination p.t.h. Board Retention Contact Material Hertz Stress Class 1 Plating Insertion Force Withdrawal Force 2,00 x 2,00 (.079 x .079) By design With coding key, see page 64 Liquid Crystal Polymer, UL94V-0 or PPS, UL94V-0 Solder tail, tin / lead plated ø 0,60 (.024), refer to page 73 Eye of the needle compliant section, tin/lead plated ø 0,70 (.028) refer to page 73 Pushfit peg or heatstake Phosphor Bronze 1200 MPa (174 klbf / sq. in.) 1000 cycles minimum Palladium Nickel plus Gold over Nickel 1,50 N (1.6 oz) max. per contact 0,30 N (0,5 oz) min. per contact Electrical Data Current Rating Withstanding Voltage Insulation Resistance Contact Resistance 4,00 A at 25°C; 3,00 A at 70°C 1000 Vrms Initial: 5000MΩ; after climatic test: 1000 MΩ 25 mΩ maximum Dimensions are shown mm (inch) Dimensions subject to change 30 www.ittcannon.com Tempus CBC 20 2 mm Interconnect Female Power Modules - Press Fit/Solder Termination - 5 Row 11,95 (.470) 6,00 (.236) 5 2 11,30 (.445) 10 Contacts Recommended P.C.B. Hole Pattern, Component Side 9,50 (.374) 8,00 (.315) 3,65 (.144) Press Fit 2,00 (.079) 4,00 (.157) 2,00 (.079) 2,00 (.079) 4,00 (.157) 8,00 (.315) 2,00 (.079) 1,55 (.059) 23,00 (.906) Contacts 6,05 (.238) 2,05 (.081) 12,00 (.472) 3,00 1,00 (.118) (.039) 4,00 (.157) Solder Tail Order Number Packaging Units PCB Thickness Board Retention 10 CBC20K90-010FDP1-0-1-002-VR 44 >1,60 (.063) push fit peg 10 CBC20K90-010FDS1-0-1-002-VR 44 1,60 (.063) push fit peg 10 CBC20K90-010FDS2-0-1-002-VR 44 2,40 (.094) push fit peg 10 CBC20K90-010FDS1-0-1-VR 44 1,60 (.063) heat stake 10 CBC20K90-010FDS2-0-1-VR 44 2,40 (.094) heat stake Dimensions are shown mm (inch) Dimensions subject to change 31 www.ittcannon.com Tempus CBC 20 2 mm Interconnect Male Signal Modules - Solder Termination - 5 Row Features • • Designed to conform with IEC61076-4-104, EIAis64, IEEE P896 Futurebus+, IEEE P1596 SCI and IEC 917 metric modular order Stackable with other TEMPUS modules, with no loss of positions • Sequential mating provides live insertion capability • High temperature materials, not affected by reflow solder process • High performance contacts, high hertz stress, 1000 cycles minimum • High I/O, 25 contacts per linear centimetre (63 contacts per linear inch) • Wide wall design for system tolerant 2,50 (.098) out-of-centre board insertion Technical Data Mechanical Data Contact Pitch Polarisation Coding Housing Material Termination Termination p.t.h. (solder) Board Guiding Left to Right Top to Bottom Board Slot Pitch Contact Material Hertz Stress Class 1 Plating Insertion Force Withdrawal Force 2,00 x 2,00 (.079 x .079) By design With coding key, see page 64 Liquid Crystal Polymer, UL94V-0 or PPS, UL94V-0 Solder tail, tin/lead plated ø 0,60 (.024), refer to page 73 2,50 - 2,50 (.100 - .100) 1,50 - 1,50 (.060 - .060) 16,00 (.630) min. Brass 1200 MPa (174 klbf / sq. in.) 1000 cycles minimum Palladium Nickel plus Gold over Nickel 0,45 N (1.6 oz) max. per contact 0,15 N (0,5 oz) min. per contact Electrical Data Current Rating 1,50 A at 25°C; 1 A at 70°C Withstanding Voltage 1000 Vrms Insulation Resistance Initial: 5000MΩ; after climatic test: 1000 MΩ Contact Resistance 45 mΩ maximum Dimensions are shown mm (inch) Dimensions subject to change 32 www.ittcannon.com Tempus CBC 20 2 mm Interconnect Male Signal Modules - Solder Termination - 5 Row 11,94 (.470) 10,00 (.394) 5,00 (.197) 4,60 (.181) 1 Recommended PCB Hole Pattern Component Side 6 8,00 (.315) 2,00 (.079) 0,50 13,50 17,80 (.020) (.532) (.701) 2,00 (.079) 6,10 (.240) 12,00 (.472) 30 Contacts 17,00 (.669) 2,00 (.079) 10,00 (.394) 0,60 (.024) 2,00 (.079) 14,00 (.551) 18,00 MIN (.709) Ø1,30 (.051) Refer to design notes page 73 for circuit board drill and hole plating details. Contacts Order Number Termination Length Mating Length Packaging PCB Units Thickness row A row B row C row D row E 30 30 30 CBC20K00-030WDS1-501-1-VR CBC20K00-030WDS1-502-1-VR CBC20K00-030WDS1-503-1-VR 44 44 44 >3,20 (.126) >3,20 (.126) >3,20 (.126) 5,00 (.197) 6,50 (.256) 6,50 (.256) 5,00 (.197) 5,00 (.197) 5,75 (.226) 5,00 (.197) 5,00 (.197) 5,75 (.226) 5,00 (.197) 5,00 (.197) 6,50 (.256) 5,00 (.197) 5,00 (.197) 5,75 (.226) 4,60 (.181) 4,60 (.181) 4,60 (.181) 30 30 CBC20K00-030WDS1-504-1-VR CBC20K00-030WDS1-505-1-VR 44 44 >3,20 (.126) >3,20 (.126) 7,25 (.285) 6,50 (.256) 6,50 (.256) 6,50 (.256) 6,50 (.256) 6,50 (.256) 6,50 (.256) 6,50 (.256) 7,25 (.285) 6,50 (.256) 4,60 (.181) 4,60 (.181) 30 30 30 CBC20K00-030WDS1-506-1-VR CBC20K00-030WDS1-507-1-VR CBC20K00-030WDS1-508-1-VR 44 44 44 >3,20 (.126) >3,20 (.126) >3,20 (.126) 8,00 (.315) 8,00 (.315) 5,75 (.226) 8,00 (.315) 6,50 (.256) 7,25 (.285) 7,25 (.285) 6,50 (.256) 5,75 (.226) 6,50 (.256) 6,50 (.256) 5,75 (.226) 6,50 (.256) 6,50 (.256) 5,75 (.226) 4,60 (.181) 4,60 (.181) 4,60 (.181) 30 30 30 30 30 CBC20K00-030WDS1-509-1-VR CBC20K00-030WDS1-601-1-VR CBC20K00-030WDS1-603-1-VR CBC20K00-030WDS1-604-1-VR CBC20K00-030WDS1-605-1-VR 44 44 44 44 44 >3,20 >3,20 >3,20 >3,20 >3,20 5,75 5,00 8,00 7,25 6,50 5,75 7,25 8,00 7,25 6,50 5,75 5,00 8,00 7,25 5,75 5,75 5,00 8,00 7,25 6,50 5,75 5,00 8,00 7,25 6,50 4,60 4,60 4,60 4,60 4,60 30 30 30 CBC20K00-030WDS2-501-1-VR CBC20K00-030WDS2-502-1-VR CBC20K00-030WDS2-503-1-VR 44 44 44 >2,40 (.094) >2,40 (.094) >2,40 (.094) 5,00 (.197) 6,50 (.256) 6,50 (.256) 5,00 (.197) 5,00 (.197) 5,75 (.226) 5,00 (.197) 5,00 (.197) 5,75 (.226) 5,00 (.197) 5,00 (.197) 6,50 (.256) 5,00 (.197) 5,00 (.197) 5,75 (.226) 3,60 (.142) 3,60 (.142) 3,60 (.142) 30 30 30 30 30 CBC20K00-030WDS2-504-1-VR CBC20K00-030WDS2-505-1-VR CBC20K00-030WDS2-506-1-VR CBC20K00-030WDS2-507-1-VR CBC20K00-030WDS2-508-1-VR 44 44 44 44 44 >2,40 >2,40 >2,40 >2,40 >2,40 (.094) (.094) (.094) (.094) (.094) 7,25 6,50 8,00 8,00 5,75 (.285) (.256) (.315) (.315) (.226) 6,50 6,50 8,00 6,50 7,25 (.256) (.256) (.315) (.256) (.285) 6,50 6,50 7,25 6,50 5,75 (.256) (.256) (.285) (.256) (.226) 6,50 6,50 6,50 6,50 5,75 (.256) (.256) (.256) (.256) (.226) 7,25 6,50 6,50 6,50 5,75 (.285) (.256) (.256) (.256) (.226) 3,60 3,60 3,60 3,60 3,60 30 30 30 30 30 CBC20K00-030WDS2-509-1-VR CBC20K00-030WDS2-601-1-VR CBC20K00-030WDS2-603-1-VR CBC20K00-030WDS2-604-1-VR CBC20K00-030WDS2-605-1-VR 44 44 44 44 44 >2,40 >2,40 >2,40 >2,40 >2,40 (.094) (.094) (.094) (.094) (.094) 5,75 5,00 8,00 7,25 6,50 (.226) (.197) (.315) (.285) (.256) 5,75 7,25 8,00 7,25 6,50 (.226) (.285) (.315) (.285) (.256) 5,75 5,00 8,00 7,25 5,75 (.226) (.197) (.315) (.285) (.226) 5,75 5,00 8,00 7,25 6,50 (.226) (.197) (.315) (.285) (.256) 5,75 5,00 8,00 7,25 6,50 (.226) (.197) (.315) (.285) (.256) 3,60 (.142) 3,60 (.142) 3,60 (.142) 3,60 (.142) 3,60 (.142) (.126) (.126) (.126) (.126) (.126) (.226) (.197) (.315) (.285) (.256) (.226) (.285) (.315) (.285) (.256) (.226) (.197) (.315) (.285) (.226) (.226) (.197) (.315) (.285) (.256) (.226) (.197) (.315) (.285) (.256) (.181) (.181) (.181) (.181) (.181) (.142) (.142) (.142) (.142) (.142) Dimensions are shown mm (inch) Dimensions subject to change 33 www.ittcannon.com Tempus CBC 20 2 mm Interconnect Male Signal Modules - Solder Termination - 5 Row 4,54 (.179) 5,00 (.197) 1 12 17,80 0,50 13,50 (.532) (.701) (.020) 2,00 (.079) 6,10 (.240) 23,94 (.943) 22,00 (.866) 60 Contacts 17,00 (.669) Recommended PCB Hole Pattern Component Side 8,00 (.315) 2,00 (.079) 12,00 (.472) 2,00 (.079) 0,6 (.024) 14,00 (.551) Refer to design notes page 73 for circuit board drill and hole plating details. Contacts Order Number 10,00 (.394) 2,00 (.079) 18,00 MIN (.709) Ø1,30 (.051) Mating Length PCB Packaging Units Thickness row A row B row C Termination Length row D row E 60 60 60 CBC20K00-060WDS1-501-1-VR 22 CBC20K00-060WDS1-502-1-VR 22 CBC20K00-060WDS1-503-1-VR 22 >3,20 (.126) >3,20 (.126) >3,20 (.126) 5,00 (.197) 6,50 (.256) 6,50 (.256) 5,00 (.197) 5,00 (.197) 5,75 (.226) 5,00 (.197) 5,00 (.197) 5,75 (.226) 5,00 (.197) 5,00 (.197) 6,50 (.256) 5,00 (.197) 5,00 (.197) 5,75 (.226) 4,60 (.181) 4,60 (.181) 4,60 (.181) 60 60 CBC20K00-060WDS1-504-1-VR CBC20K00-060WDS1-505-1-VR 22 22 >3,20 (.126) >3,20 (.126) 7,25 (.285) 6,50 (.256) 6,50 (.256) 6,50 (.256) 6,50 (.256) 6,50 (.256) 6,50 (.256) 6,50 (.256) 7,25 (.285) 6,50 (.256) 4,60 (.181) 4,60 (.181) 60 60 60 CBC20K00-060WDS1-506-1-VR CBC20K00-060WDS1-507-1-VR CBC20K00-060WDS1-508-1-VR 22 22 22 >3,20 (.126) >3,20 (.126) >3,20 (.126) 8,00 (.315) 8,00 (.315) 5,75 (.226) 8,00 (.315) 6,50 (.256) 7,25 (.285) 7,25 (.285) 6,50 (.256) 5,75 (.226) 6,50 (.256) 6,50 (.256) 5,75 (.226) 6,50 (.256) 6,50 (.256) 5,75 (.226) 4,60 (.181) 4,60 (.181) 4,60 (.181) 60 60 CBC20K00-060WDS1-509-1-VR CBC20K00-060WDS1-601-1-VR 22 22 >3,20 (.126) >3,20 (.126) 5,75 (.226) 5,00 (.197) 5,75 (.226) 7,25 (.285) 5,75 (.226) 5,00 (.197) 5,75 (.226) 5,00 (.197) 5,75 (.226) 5,00 (.197) 4,60 (.181) 4,60 (.181) 60 60 60 CBC20K00-060WDS1-603-1-VR CBC20K00-060WDS1-604-1-VR CBC20K00-060WDS1-605-1-VR 22 22 22 >3,20 (.126) >3,20 (.126) >3,20 (.126) 8,00 (.315) 7,25 (.285) 6,50 (.256) 8,00 (.315) 7,25 (.285) 6,50 (.256) 8,00 (.315) 7,25 (.285) 5,75 (.226) 8,00 (.315) 7,25 (.285) 6,50 (.256) 8,00 (.315) 7,25 (.285) 6,50 (.256) 4,60 (.181) 4,60 (.181) 4,60 (.181) 60 CBC20K00-060WDS2-501-1-VR 22 >2,40 (.094) 5,00 (.197) 5,00 (.197) 5,00 (.197) 5,00 (.197) 5,00 (.197) 3,60 (.142) 60 60 60 60 60 CBC20K00-060WDS2-502-1-VR CBC20K00-060WDS2-503-1-VR CBC20K00-060WDS2-504-1-VR CBC20K00-060WDS2-505-1-VR CBC20K00-060WDS2-506-1-VR 22 22 22 22 22 >2,40 >2,40 >2,40 >2,40 >2,40 (.094) (.094) (.094) (.094) (.094) 6,50 6,50 7,25 6,50 8,00 (.256) (.256) (.285) (.256) (.315) 5,00 5,75 6,50 6,50 8,00 (.197) (.226) (.256) (.256) (.315) 5,00 5,75 6,50 6,50 7,25 (.197) (.226) (.256) (.256) (.285) 5,00 6,50 6,50 6,50 6,50 (.197) (.256) (.256) (.256) (.256) 5,00 5,75 7,25 6,50 6,50 (.197) (.226) (.285) (.256) (.256) 3,60 3,60 3,60 3,60 3,60 (.142) (.142) (.142) (.142) (.142) 60 60 60 60 CBC20K00-060WDS2-507-1-VR CBC20K00-060WDS2-508-1-VR CBC20K00-060WDS2-509-1-VR CBC20K00-060WDS2-601-1-VR 22 22 22 22 >2,40 >2,40 >2,40 >2,40 (.094) (.094) (.094) (.094) 8,00 5,75 5,75 5,00 (.315) (.226) (.226) (.197) 6,50 7,25 5,75 7,25 (.256) (.285) (.226) (.285) 6,50 5,75 5,75 5,00 (.256) (.226) (.226) (.197) 6,50 5,75 5,75 5,00 (.256) (.226) (.226) (.197) 6,50 5,75 5,75 5,00 (.256) (.226) (.226) (.197) 3,60 3,60 3,60 3,60 (.142) (.142) (.142) (.142) 60 60 60 CBC20K00-060WDS2-603-1-VR CBC20K00-060WDS2-604-1-VR CBC20K00-060WDS2-605-1-VR 22 22 22 >2,40 (.094) >2,40 (.094) >2,40 (.094) 8,00 (.315) 7,25 (.285) 6,50 (.256) 8,00 (.315) 7,25 (.285) 6,50 (.256) 8,00 (.315) 7,25 (.285) 5,75 (.226) 8,00 (.315) 7,25 (.285) 6,50 (.256) 8,00 (.315) 7,25 (.285) 6,50 (.256) 3,60 (.142) 3,60 (.142) 3,60 (.142) Dimensions are shown mm (inch) Dimensions subject to change 34 www.ittcannon.com Tempus CBC 20 2 mm Interconnect Male Signal Modules - Solder Termination - 5 Row 47,94 (1.887) 5,00 (.197) 4,60 (.181) 0,50 (.020) 46,00 (1.811) 1 12 13,50 17,80 (.532) (.701) 2,00 (.079) 6,10 (.240) 120 Contacts 17,00 (.669) Recommended PCB Hole Pattern Component Side 8,00 (.315) 2,00 (.079) 12,00 (.472) 2,00 (.079) 10,00 (.394) 0,60 (.024) 14,00 (.551) Refer to design notes page 73 for circuit board drill and hole plating details. Contacts Order Number 2,00 (.079) Ø1,30 (.051) 18,00 MIN (.709) Termination Length Mating Length Packaging PCB Units Thickness row A row B row E 11 >3,20 (.126) 5,00 (.197) 120 120 120 CBC20K00-120WDS1-502-1-VR CBC20K00-120WDS1-503-1-VR CBC20K00-120WDS1-504-1-VR 11 11 11 >3,20 (.126) >3,20 (.126) >3,20 (.126) 6,50 (.256) 5,00 (.197) 5,00 (.197) 5,00 (.197) 5,00 (.197) 6,50 (.256) 5,75 (.226) 5,75 (.226) 6,50 (.256) 5,75 (.226) 7,25 (.285) 6,50 (.256) 6,50 (.256) 6,50 (.256) 7,25 (.285) 4,60 (.181) 4,60 (.181) 4,60 (.181) 120 120 CBC20K00-120WDS1-505-1-VR CBC20K00-120WDS1-506-1-VR 11 11 >3,20 (.126) >3,20 (.126) 6,50 (.256) 8,00 (.315) 6,50 (.256) 8,00 (.315) 6,50 (.256) 7,25 (.285) 6,50 (.256) 6,50 (.256) 4,60 (.181) 4,60 (.181) 120 120 120 120 120 120 CBC20K00-120WDS1-507-1-VR CBC20K00-120WDS1-508-1-VR CBC20K00-120WDS1-509-1-VR CBC20K00-120WDS1-601-1-VR CBC20K00-120WDS1-603-1-VR CBC20K00-120WDS1-604-1-VR 11 11 11 11 11 11 >3,20 >3,20 >3,20 >3,20 >3,20 >3,20 8,00 5,75 5,75 5,00 8,00 7,25 6,50 7,25 5,75 7,25 8,00 7,25 6,50 5,75 5,75 5,00 8,00 7,25 6,50 5,75 5,75 5,00 8,00 7,25 120 CBC20K00-120WDS1-605-1-VR 11 >3,20 (.126) 6,50 (.256) 6,50 (.256) 5,75 (.226) 120 120 120 CBC20K00-120WDS2-501-1-VR CBC20K00-120WDS2-502-1-VR CBC20K00-120WDS2-503-1-VR 11 11 11 >2,40 (.094) >2,40 (.094) >2,40 (.094) 5,00 (.197) 6,50 (.256) 6,50 (.256) 5,00 (.197) 5,00 (.197) 5,75 (.226) 120 120 120 120 120 CBC20K00-120WDS2-504-1-VR CBC20K00-120WDS2-505-1-VR CBC20K00-120WDS2-506-1-VR CBC20K00-120WDS2-507-1-VR CBC20K00-120WDS2-508-1-VR 11 11 11 11 11 >2,40 >2,40 >2,40 >2,40 >2,40 (.094) (.094) (.094) (.094) (.094) 7,25 6,50 8,00 8,00 5,75 (.285) (.256) (.315) (.315) (.226) 6,50 6,50 8,00 6,50 7,25 120 120 120 120 CBC20K00-120WDS2-509-1-VR CBC20K00-120WDS2-601-1-VR CBC20K00-120WDS2-603-1-VR CBC20K00-120WDS2-604-1-VR 11 11 11 11 >2,40 >2,40 >2,40 >2,40 (.094) (.094) (.094) (.094) 5,75 5,00 8,00 7,25 (.226) (.197) (.315) (.285) 5,75 7,25 8,00 7,25 120 CBC20K00-120WDS2-605-1-VR 11 >2,40 (.094) (.315) (.226) (.226) (.197) (.315) (.285) 6,50 (.256) (.256) (.285) (.226) (.285) (.315) (.285) 5,00 (.197) row D CBC20K00-120WDS1-501-1-VR (.126) (.126) (.126) (.126) (.126) (.126) 5,00 (.197) row C 120 6,50 (.256) 6,50 (.256) 4,60 (.181) 4,60 4,60 4,60 4,60 4,60 4,60 6,50 (.256) 6,50 (.256) 4,60 (.181) 5,00 (.197) 5,00 (.197) 5,75 (.226) 5,00 (.197) 5,00 (.197) 6,50 (.256) 5,00 (.197) 5,00 (.197) 5,75 (.226) 3,60 (.142) 3,60 (.142) 3,60 (.142) (.256) (.256) (.315) (.256) (.285) 6,50 6,50 7,25 6,50 5,75 (.256) (.256) (.285) (.256) (.226) 6,50 6,50 6,50 6,50 5,75 (.256) (.256) (.256) (.256) (.226) 7,25 (.285) 6,50 (.256) 6,50 (.256) 6,50 (.256) 5,75 (.226) 3,60 3,60 3,60 3,60 3,60 (.142) (.142) (.142) (.142) (.142) (.226) (.285) (.315) (.285) 5,75 5,00 8,00 7,25 (.226) (.197) (.315) (.285) 5,75 5,00 8,00 7,25 (.226) (.197) (.315) (.285) 3,60 3,60 3,60 3,60 (.142) (.142) (.142) (.142) 5,75 (.226) (.256) (.226) (.226) (.197) (.315) (.285) 5,00 (.197) 6,50 (.256) 5,75 (.226) 5,75 (.226) 5,00 (.197) 8,00 (.315) 7,25 (.285) 6,50 (.256) (.256) (.226) (.226) (.197) (.315) (.285) 5,00 (.197) 6,50 (.256) 5,75 5,00 8,00 7,25 (.226) (.197) (.315) (.285) 6,50 (.256) (.181) (.181) (.181) (.181) (.181) (.181) 3,60 (.142) Dimensions are shown mm (inch) Dimensions subject to change 35 www.ittcannon.com Tempus CBC 20 2 mm Interconnect Male Signal Modules - Solder Termination - 5 Row 5,00 (.197) 4,60 (.181) 1 24 13,50 17,80 0,50 (.532) (.701) (.020) 2,00 (.079) 6,10 (.240) 95,94 (3.777) 94,00 (3.701) 17,00 (.669) 240 Contacts Recommended PCB Hole Pattern Component Side 8,00 (.315) 2,00 (.079) 12,00 (.472) 2,00 (.079) 10,00 (.394) 0,60 (.024) 14,00 (.551) Ø1,30 (.051) Refer to design notes page 73 for circuit board drill and hole plating details. Contacts Order Number Packaging Units 2,00 (.079) 18,00 MIN (.709) Mating Length PCB Thickness row A row B row C Termination Length row D row E 240 240 240 CBC20K00-240WDS1-501-1-VR CBC20K00-240WDS1-502-1-VR CBC20K00-240WDS1-503-1-VR 5 5 5 >3,20 (.126) >3,20 (.126) >3,20 (.126) 5,00 (.197) 5,00 (.197) 5,00 (.197) 5,00 (.197) 5,00 (.197) 6,50 (.256) 5,00 (.197) 5,00 (.197) 5,00 (.197) 5,00 (.197) 6,50 (.256) 5,75 (.226) 5,75 (.226) 6,50 (.256) 5,75 (.226) 4,60 (.181) 4,60 (.181) 4,60 (.181) 240 240 CBC20K00-240WDS1-504-1-VR CBC20K00-240WDS1-505-1-VR 5 5 >3,20 (.126) >3,20 (.126) 7,25 (.285) 6,50 (.256) 6,50 (.256) 6,50 (.256) 6,50 (.256) 6,50 (.256) 6,50 (.256) 6,50 (.256) 7,25 (.285) 6,50 (.256) 4,60 (.181) 4,60 (.181) 240 240 240 CBC20K00-240WDS1-506-1-VR CBC20K00-240WDS1-507-1-VR CBC20K00-240WDS1-508-1-VR 5 5 5 >3,20 (.126) >3,20 (.126) >3,20 (.126) 8,00 (.315) 8,00 (.315) 5,75 (.226) 8,00 (.315) 6,50 (.256) 7,25 (.285) 7,25 (.285) 6,50 (.256) 5,75 (.226) 6,50 (.256) 6,50 (.256) 5,75 (.226) 6,50 (.256) 6,50 (.256) 5,75 (.226) 4,60 (.181) 4,60 (.181) 4,60 (.181) 240 240 CBC20K00-240WDS1-509-1-VR CBC20K00-240WDS1-601-1-VR 5 5 >3,20 (.126) >3,20 (.126) 5,75 (.226) 5,00 (.197) 5,75 (.226) 7,25 (.285) 5,75 (.226) 5,00 (.197) 5,75 (.226) 5,00 (.197) 5,75 (.226) 5,00 (.197) 4,60 (.181) 4,60 (.181) 240 CBC20K00-240WDS1-603-1-VR 5 >3,20 (.126) 8,00 (.315) 8,00 (.315) 8,00 (.315) 8,00 (.315) 240 240 CBC20K00-240WDS1-604-1-VR CBC20K00-240WDS1-605-1-VR 5 5 >3,20 (.126) >3,20 (.126) 7,25 (.285) 6,50 (.256) 7,25 (.285) 6,50 (.256) 7,25 (.285) 5,75 (.226) 7,25 (.285) 6,50 (.256) 7,25 (.285) 6,50 (.256) 4,60 (.181) 4,60 (.181) 240 CBC20K00-240WDS2-501-1-VR 5 >2,40 (.094) 5,00 (.197) 5,00 (.197) 5,00 (.197) 5,00 (.197) 5,00 (.197) 3,60 (.142) 240 240 240 CBC20K00-240WDS2-502-1-VR CBC20K00-240WDS2-503-1-VR CBC20K00-240WDS2-504-1-VR 5 5 5 >2,40 (.094) >2,40 (.094) >2,40 (.094) 6,50 (.256) 6,50 (.256) 7,25 (.285) 5,00 (.197) 5,75 (.226) 6,50 (.256) 5,00 (.197) 5,75 (.226) 6,50 (.256) 5,00 (.197) 6,50 (.256) 6,50 (.256) 5,00 (.197) 5,75 (.226) 7,25 (.285) 3,60 (.142) 3,60 (.142) 3,60 (.142) 240 240 CBC20K00-240WDS2-505-1-VR CBC20K00-240WDS2-506-1-VR 5 5 >2,40 (.094) >2,40 (.094) 6,50 (.256) 8,00 (.315) 6,50 (.256) 8,00 (.315) 6,50 (.256) 7,25 (.285) 6,50 (.256) 6,50 (.256) 6,50 (.256) 6,50 (.256) 3,60 (.142) 3,60 (.142) 240 240 240 CBC20K00-240WDS2-507-1-VR CBC20K00-240WDS2-508-1-VR CBC20K00-240WDS2-509-1-VR 5 5 5 >2,40 (.094) >2,40 (.094) >2,40 (.094) 8,00 (.315) 5,75 (.226) 5,75 (.226) 6,50 (.256) 7,25 (.285) 5,75 (.226) 6,50 (.256) 5,75 (.226) 5,75 (.226) 6,50 (.256) 5,75 (.226) 5,75 (.226) 6,50 (.256) 5,75 (.226) 5,75 (.226) 3,60 (.142) 3,60 (.142) 3,60 (.142) 240 240 240 240 CBC20K00-240WDS2-601-1-VR CBC20K00-240WDS2-603-1-VR CBC20K00-240WDS2-604-1-VR CBC20K00-240WDS2-605-1-VR 5 5 5 5 >2,40 >2,40 >2,40 >2,40 5,00 8,00 7,25 6,50 7,25 8,00 7,25 6,50 5,00 8,00 7,25 5,75 5,00 8,00 7,25 6,50 5,00 8,00 7,25 6,50 3,60 3,60 3,60 3,60 (.094) (.094) (.094) (.094) (.197) (.315) (.285) (.256) (.285) (.315) (.285) (.256) (.197) (.315) (.285) (.226) (.197) (.315) (.285) (.256) 8,00 (.315) (.197) (.315) (.285) (.256) 4,60 (.181) Dimensions are shown mm (inch) Dimensions subject to change 36 www.ittcannon.com (.142) (.142) (.142) (.142) Tempus CBC 20 2 mm Interconnect Male Signal Modules - Press Fit Termination - 5 Row Features • • Designed to conform with IEC61076-4-104, EIAis64, IEEE P896 Futurebus+, IEEE P1596 SCI and IEC 917 metric modular order • Sequential mating provides live insertion capability • High temperature materials, not affected by reflow solder process • High performance contacts, high hertz stress, 1000 cycles minimum • High I/O, 25 contacts per linear centimetre (63 contacts per linear inch) Stackable with other TEMPUS modules, with no loss of positions • Wide wall design for system tolerant 2,50 (.098) out-of-centre board insertion Technical Data Mechanical Data Contact Pitch Polarisation Coding Housing Material Termination Termination p.t.h. (solder) Board Guiding Left to Right Top to Bottom Board Slot Pitch Contact Material Hertz Stress Class 1 Plating Insertion Force Withdrawal Force 2,00 x 2,00 (.079 x .079) By design With coding key, see page 64 Liquid Crystal Polymer, UL94V-0 or PPS, UL94V-0 Eye of the needle compliant section, tin/lead plated ø 0,70 (.028), refer to page 73 2,50 - 2,50 (.100 - .100) 1,50 - 1,50 (.060 - .060) 16,00 (.630) min. Phosphor bronze 1200 MPa (174 klbf / sq. in.) 1000 cycles minimum Palladium Nickel plus Gold over Nickel 0,45 N (1.6 oz) max. per contact 0,15 N (0,5 oz) min. per contact Electrical Data Current Rating 1,50 A at 25°C; 1 A at 70°C Withstanding Voltage 1000 Vrms Insulation Resistance Initial: 5000MΩ; after climatic test: 1000 MΩ Contact Resistance 45 mΩ maximum Dimensions are shown mm (inch) Dimensions subject to change 37 www.ittcannon.com Tempus CBC 20 2 mm Interconnect Male Signal Modules - Press Fit Termination - 5 Row 11,94 (.470) 10,00 (.394) 5,00 (.197) 4,30 (.169) 13,50 17,80 0,50 (.532) (.701) (.020) 2,00 (.079) 5,95 (.234) Recommended PCB Hole Pattern Component Side 30 Contacts 8,00 (.315) 17,00 (.669) 2,00 (.079) 2,00 (.079) 0,70 (.028) 18,00 MIN (.709) Refer to design notes page 73 for circuit board drill and hole plating details. Contacts Order Number Packaging Units Mating Length PCB Thickness Termination Length row A row B row C row D 30 30 CBC20K00-030WDP1-501-1-VR CBC20K00-030WDP1-502-1-VR 44 44 >1,80 (.071) >1,80 (.071) 5,00 (.197) 6,50 (.256) 5,00 (.197) 5,00 (.197) 5,00 (.197) 5,00 (.197) 5,00 (.197) 5,00 (.197) 5,00 (.197) 5,00 (.197) 4,30 (.169) 4,30 (.169) 30 30 CBC20K00-030WDP1-503-1-VR CBC20K00-030WDP1-504-1-VR 44 44 >1,80 (.071) >1,80 (.071) 6,50 (.256) 7,25 (.285) 5,75 (.226) 6,50 (.256) 5,75 (.226) 6,50 (.256) 6,50 (.256) 6,50 (.256) 5,75 (.226) 7,25 (.285) 4,30 (.169) 4,30 (.169) 30 30 30 CBC20K00-030WDP1-505-1-VR CBC20K00-030WDP1-506-1-VR CBC20K00-030WDP1-507-1-VR 44 44 44 >1,80 (.071) >1,80 (.071) >1,80 (.071) 6,50 (.256) 8,00 (.315) 8,00 (.315) 6,50 (.256) 8,00 (.315) 6,50 (.256) 6,50 (.256) 7,25 (.285) 6,50 (.256) 6,50 (.256) 6,50 (.256) 6,50 (.256) 6,50 (.256) 6,50 (.256) 6,50 (.256) 4,30 (.169) 4,30 (.169) 4,30 (.169) 30 30 CBC20K00-030WDP1-508-1-VR CBC20K00-030WDP1-509-1-VR 44 44 >1,80 (.071) >1,80 (.071) 5,75 (.226) 5,75 (.226) 7,25 (.285) 5,75 (.226) 5,75 (.226) 5,75 (.226) 5,75 (.226) 5,75 (.226) 5,75 (.226) 5,75 (.226) 4,30 (.169) 4,30 (.169) 30 30 30 CBC20K00-030WDP1-601-1-VR CBC20K00-030WDP1-603-1-VR CBC20K00-030WDP1-604-1-VR 44 44 44 >1,80 (.071) >1,80 (.071) >1,80 (.071) 5,00 (.197) 8,00 (.315) 7,25 (.285) 7,25 (.285) 8,00 (.315) 7,25 (.285) 5,00 (.197) 8,00 (.315) 7,25 (.285) 5,00 (.197) 8,00 (.315) 7,25 (.285) 5,00 (.197) 8,00 (.315) 7,25 (.285) 4,30 (.169) 4,30 (.169) 4,30 (.169) 30 CBC20K00-030WDP1-605-1-VR 44 >1,80 (.071) 6,50 (.256) 6,50 (.256) 5,75 (.226) 6,50 (.256) 6,50 (.256) 4,30 (.169) 30 30 CBC20K00-030WDP3-501-1-VR CBC20K00-030WDP3-502-1-VR 44 44 >1,80 (.071) >1,80 (.071) 5,00 (.197) 6,50 (.256) 5,00 (.197) 5,00 (.197) 5,00 (.197) 5,00 (.197) 5,00 (.197) 5,00 (.197) 5,00 (.197) 5,00 (.197) 4,30 (.169) 4,30 (.169) 30 30 30 30 30 CBC20K00-030WDP3-503-1-VR CBC20K00-030WDP3-504-1-VR CBC20K00-030WDP3-505-1-VR CBC20K00-030WDP3-506-1-VR CBC20K00-030WDP3-507-1-VR 44 44 44 44 44 >1,80 >1,80 >1,80 >1,80 >1,80 (.071) (.071) (.071) (.071) (.071) 6,50 7,25 6,50 8,00 8,00 (.256) (.285) (.256) (.315) (.315) 5,75 6,50 6,50 8,00 6,50 (.226) (.256) (.256) (.315) (.256) 5,75 6,50 6,50 7,25 6,50 (.226) (.256) (.256) (.285) (.256) 6,50 6,50 6,50 6,50 6,50 (.256) (.256) (.256) (.256) (.256) 5,75 7,25 6,50 6,50 6,50 (.226) (.285) (.256) (.256) (.256) 4,30 4,30 4,30 4,30 4,30 (.169) (.169) (.169) (.169) (.169) 30 30 30 30 30 CBC20K00-030WDP3-508-1-VR CBC20K00-030WDP3-509-1-VR CBC20K00-030WDP3-601-1-VR CBC20K00-030WDP3-603-1-VR CBC20K00-030WDP3-604-1-VR 44 44 44 44 44 >1,80 >1,80 >1,80 >1,80 >1,80 (.071) (.071) (.071) (.071) (.071) 5,75 5,75 5,00 8,00 7,25 (.226) (.226) (.197) (.315) (.285) 7,25 5,75 7,25 8,00 7,25 (.285) (.226) (.285) (.315) (.285) 5,75 5,75 5,00 8,00 7,25 (.226) (.226) (.197) (.315) (.285) 5,75 5,75 5,00 8,00 7,25 (.226) (.226) (.197) (.315) (.285) 5,75 5,75 5,00 8,00 7,25 (.226) (.226) (.197) (.315) (.285) 4,30 4,30 4,30 4,30 4,30 (.169) (.169) (.169) (.169) (.169) 30 CBC20K00-030WDP3-605-1-VR 44 >1,80 (.071) 6,50 (.256) 6,50 (.256) 5,75 (.226) row E 6,50 (.256) 6,50 (.256) 4,30 (.169) Dimensions are shown mm (inch) Dimensions subject to change 38 www.ittcannon.com Tempus CBC 20 2 mm Interconnect Male Signal Modules - Press Fit Termination - 5 Row Contacts Order Number Packaging Units Mating Length PCB Thickness row A Termination Length row B row C row D row E 30 30 30 CBC20K00-030WDU1-501-1-VR CBC20K00-030WDU1-502-1-VR CBC20K00-030WDU1-503-1-VR 44 44 44 >1,80 (.071) >1,80 (.071) >1,80 (.071) 5,00 (.197) 6,50 (.256) 6,50 (.256) 5,00 (.197) 5,00 (.197) 5,75 (.226) 5,00 (.197) 5,00 (.197) 5,75 (.226) 5,00 (.197) 5,00 (.197) 6,50 (.256) 5,00 (.197) 5,00 (.197) 5,75 (.226) 4,30 (.169) 4,30 (.169) 4,30 (.169) 30 30 30 30 30 CBC20K00-030WDU1-504-1-VR CBC20K00-030WDU1-505-1-VR CBC20K00-030WDU1-506-1-VR CBC20K00-030WDU1-507-1-VR CBC20K00-030WDU1-508-1-VR 44 44 44 44 44 >1,80 >1,80 >1,80 >1,80 >1,80 (.071) (.071) (.071) (.071) (.071) 7,25 6,50 8,00 8,00 5,75 (.285) (.256) (.315) (.315) (.226) 6,50 6,50 8,00 6,50 7,25 (.256) (.256) (.315) (.256) (.285) 6,50 6,50 7,25 6,50 5,75 (.256) (.256) (.285) (.256) (.226) 6,50 6,50 6,50 6,50 5,75 (.256) (.256) (.256) (.256) (.226) 7,25 6,50 6,50 6,50 5,75 (.285) (.256) (.256) (.256) (.226) 4,30 4,30 4,30 4,30 4,30 (.169) (.169) (.169) (.169) (.169) 30 30 30 30 CBC20K00-030WDU1-509-1-VR CBC20K00-030WDU1-601-1-VR CBC20K00-030WDU1-603-1-VR CBC20K00-030WDU1-604-1-VR 44 44 44 44 >1,80 >1,80 >1,80 >1,80 (.071) (.071) (.071) (.071) 5,75 5,00 8,00 7,25 (.226) (.197) (.315) (.285) 5,75 7,25 8,00 7,25 (.226) (.285) (.315) (.285) 5,75 5,00 8,00 7,25 (.226) (.197) (.315) (.285) 5,75 5,00 8,00 7,25 (.226) (.197) (.315) (.285) 5,75 5,00 8,00 7,25 (.226) (.197) (.315) (.285) 4,30 4,30 4,30 4,30 (.169) (.169) (.169) (.169) 30 CBC20K00-030WDU1-605-1-VR 44 >1,80 (.071) 6,50 (.256) 6,50 (.256) 5,75 (.226) 6,50 (.256) 6,50 (.256) 4,30 (.169) 30 30 30 CBC20K00-030WDV2-501-1-VR CBC20K00-030WDV2-502-1-VR CBC20K00-030WDV2-503-1-VR 44 44 44 >1,80 (.071) >1,80 (.071) >1,80 (.071) 5,00 (.197) 6,50 (.256) 6,50 (.256) 5,00 (.197) 5,00 (.197) 5,75 (.226) 5,00 (.197) 5,00 (.197) 5,75 (.226) 5,00 (.197) 5,00 (.197) 6,50 (.256) 5,00 (.197) 5,00 (.197) 5,75 (.226) 17,00 (.669) 17,00 (.669) 17,00 (.669) 30 30 CBC20K00-030WDV2-504-1-VR CBC20K00-030WDV2-505-1-VR 44 44 >1,80 (.071) >1,80 (.071) 7,25 (.285) 6,50 (.256) 6,50 (.256) 6,50 (.256) 6,50 (.256) 6,50 (.256) 6,50 (.256) 6,50 (.256) 7,25 (.285) 6,50 (.256) 17,00 (.669) 17,00 (.669) 30 30 30 CBC20K00-030WDV2-506-1-VR CBC20K00-030WDV2-507-1-VR CBC20K00-030WDV2-508-1-VR 44 44 44 >1,80 (.071) >1,80 (.071) >1,80 (.071) 8,00 (.315) 8,00 (.315) 5,75 (.226) 8,00 (.315) 6,50 (.256) 7,25 (.285) 7,25 (.285) 6,50 (.256) 5,75 (.226) 6,50 (.256) 6,50 (.256) 5,75 (.226) 6,50 (.256) 6,50 (.256) 5,75 (.226) 17,00 (.669) 17,00 (.669) 17,00 (.669) 30 30 CBC20K00-030WDV2-509-1-VR CBC20K00-030WDV2-601-1-VR 44 44 >1,80 (.071) >1,80 (.071) 5,75 (.226) 5,00 (.197) 5,75 (.226) 7,25 (.285) 5,75 (.226) 5,00 (.197) 5,75 (.226) 5,00 (.197) 5,75 (.226) 5,00 (.197) 17,00 (.669) 17,00 (.669) 30 30 30 CBC20K00-030WDV2-603-1-VR CBC20K00-030WDV2-604-1-VR CBC20K00-030WDV2-605-1-VR 44 44 44 >1,80 (.071) >1,80 (.071) >1,80 (.071) 8,00 (.315) 7,25 (.285) 6,50 (.256) 8,00 (.315) 7,25 (.285) 6,50 (.256) 17,00 (.669) 17,00 (.669) 17,00 (.669) 8,00 (.315) 7,25 (.285) 6,50 (.256) 8,00 (.315) 7,25 (.285) 5,75 (.226) 8,00 (.315) 7,25 (.285) 6,50 (.256) Dimensions are shown mm (inch) Dimensions subject to change 39 www.ittcannon.com Tempus CBC 20 2 mm Interconnect Male Signal Modules - Press Fit Termination - 5 Row 5,00 (.197) 4,30 (.169) 1 12 13,50 17,80 0,50 (.532) (.701) (.020) 2,00 (.079) 5,95 (.234) Recommended PCB Hole Pattern Component Side 60 Contacts 8,00 (.315) 17,00 (.669) 2,00 (.079) 2,00 (.079) 0,70 (.028) 18,00 MIN (.709) Refer to design notes page 73 for circuit board drill and hole plating details. Contacts Order Number Packaging Units Mating Length PCB Thickness row A row B row C Termination Length row D row E 60 CBC20K00-060WDP1-501-1-VR 22 >1,80 (.071) 5,00 (.197) 5,00 (.197) 5,00 (.197) 5,00 (.197) 5,00 (.197) 4,30 (.169) 60 60 CBC20K00-060WDP1-502-1-VR CBC20K00-060WDP1-503-1-VR 22 22 >1,80 (.071) >1,80 (.071) 6,50 (.256) 6,50 (.256) 5,00 (.197) 5,75 (.226) 5,00 (.197) 5,75 (.226) 5,00 (.197) 6,50 (.256) 5,00 (.197) 5,75 (.226) 4,30 (.169) 4,30 (.169) 60 60 CBC20K00-060WDP1-504-1-VR CBC20K00-060WDP1-505-1-VR 22 22 >1,80 (.071) >1,80 (.071) 7,25 (.285) 6,50 (.256) 6,50 (.256) 6,50 (.256) 6,50 (.256) 6,50 (.256) 6,50 (.256) 6,50 (.256) 7,25 (.285) 6,50 (.256) 4,30 (.169) 4,30 (.169) 60 60 60 60 60 CBC20K00-060WDP1-506-1-VR CBC20K00-060WDP1-507-1-VR CBC20K00-060WDP1-508-1-VR CBC20K00-060WDP1-509-1-VR CBC20K00-060WDP1-601-1-VR 22 22 22 22 22 >1,80 >1,80 >1,80 >1,80 >1,80 8,00 6,50 7,25 5,75 7,25 7,25 6,50 5,75 5,75 5,00 6,50 6,50 5,75 5,75 5,00 6,50 6,50 5,75 5,75 5,00 4,30 4,30 4,30 4,30 4,30 60 60 60 CBC20K00-060WDP1-603-1-VR CBC20K00-060WDP1-604-1-VR CBC20K00-060WDP1-605-1-VR 22 22 22 >1,80 (.071) >1,80 (.071) >1,80 (.071) (.071) (.071) (.071) (.071) (.071) 8,00 (.315) 8,00 (.315) 5,75 (.226) 5,75 (.226) 5,00 (.197) 8,00 (.315) 7,25 (.285) 6,50 (.256) (.315) (.256) (.285) (.226) (.285) (.285) (.256) (.226) (.226) (.197) 8,00 (.315) 8,00 (.315) 7,25 (.285) 7,25 (.285) 6,50 (.256) 5,75 (.226) (.256) (.256) (.226) (.226) (.197) 8,00 (.315) 7,25 (.285) 6,50 (.256) (.256) (.256) (.226) (.226) (.197) 8,00 (.315) 7,25 (.285) 6,50 (.256) 4,30 (.169) 4,30 (.169) 4,30 (.169) Dimensions are shown mm (inch) Dimensions subject to change 40 (.169) (.169) (.169) (.169) (.169) www.ittcannon.com Tempus CBC 20 2 mm Interconnect Male Signal Modules - Press Fit Termination - 5 Row Contacts Order Number Packaging Units Mating Length PCB Thickness row A Termination Length row B row C row D row E 60 60 60 CBC20K00-060WDP3-501-1-VR CBC20K00-060WDP3-502-1-VR CBC20K00-060WDP3-503-1-VR 22 22 22 >1,80 (.071) >1,80 (.071) >1,80 (.071) 5,00 (.197) 6,50 (.256) 6,50 (.256) 5,00 (.197) 5,00 (.197) 5,75 (.226) 5,00 (.197) 5,00 (.197) 5,75 (.226) 5,00 (.197) 5,00 (.197) 6,50 (.256) 5,00 (.197) 5,00 (.197) 5,75 (.226) 4,30 (.169) 4,30 (.169) 4,30 (.169) 60 CBC20K00-060WDP3-504-1-VR 22 >1,80 (.071) 7,25 (.285) 6,50 (.256) 6,50 (.256) 6,50 (.256) 7,25 (.285) 4,30 (.169) 60 60 60 CBC20K00-060WDP3-505-1-VR CBC20K00-060WDP3-506-1-VR CBC20K00-060WDP3-507-1-VR 22 22 22 >1,80 (.071) >1,80 (.071) >1,80 (.071) 6,50 (.256) 8,00 (.315) 8,00 (.315) 6,50 (.256) 8,00 (.315) 6,50 (.256) 6,50 (.256) 7,25 (.285) 6,50 (.256) 6,50 (.256) 6,50 (.256) 6,50 (.256) 6,50 (.256) 6,50 (.256) 6,50 (.256) 4,30 (.169) 4,30 (.169) 4,30 (.169) 60 60 CBC20K00-060WDP3-508-1-VR CBC20K00-060WDP3-509-1-VR 22 22 >1,80 (.071) >1,80 (.071) 5,75 (.226) 5,75 (.226) 7,25 (.285) 5,75 (.226) 5,75 (.226) 5,75 (.226) 5,75 (.226) 5,75 (.226) 5,75 (.226) 5,75 (.226) 4,30 (.169) 4,30 (.169) 60 60 60 CBC20K00-060WDP3-601-1-VR CBC20K00-060WDP3-603-1-VR CBC20K00-060WDP3-604-1-VR 22 22 22 >1,80 (.071) >1,80 (.071) >1,80 (.071) 5,00 (.197) 8,00 (.315) 7,25 (.285) 7,25 (.285) 8,00 (.315) 7,25 (.285) 5,00 (.197) 8,00 (.315) 7,25 (.285) 5,00 (.197) 8,00 (.315) 7,25 (.285) 5,00 (.197) 8,00 (.315) 7,25 (.285) 4,30 (.169) 4,30 (.169) 4,30 (.169) 60 CBC20K00-060WDP3-605-1-VR 22 >1,80 (.071) 6,50 (.256) 6,50 (.256) 5,75 (.226) 6,50 (.256) 6,50 (.256) 4,30 (.169) 60 60 60 CBC20K00-060WDU1-501-1-VR CBC20K00-060WDU1-502-1-VR CBC20K00-060WDU1-503-1-VR 22 22 22 >1,80 (.071) >1,80 (.071) >1,80 (.071) 5,00 (.197) 6,50 (.256) 6,50 (.256) 5,00 (.197) 5,00 (.197) 5,75 (.226) 5,00 (.197) 5,00 (.197) 5,75 (.226) 5,00 (.197) 5,00 (.197) 6,50 (.256) 5,00 (.197) 5,00 (.197) 5,75 (.226) 13,60 (.535) 13,60 (.535) 13,60 (.535) 60 60 CBC20K00-060WDU1-504-1-VR CBC20K00-060WDU1-505-1-VR 22 22 >1,80 (.071) >1,80 (.071) 7,25 (.285) 6,50 (.256) 6,50 (.256) 6,50 (.256) 6,50 (.256) 6,50 (.256) 6,50 (.256) 6,50 (.256) 7,25 (.285) 6,50 (.256) 13,60 (.535) 13,60 (.535) 60 60 60 CBC20K00-060WDU1-506-1-VR CBC20K00-060WDU1-507-1-VR CBC20K00-060WDU1-508-1-VR 22 22 22 >1,80 (.071) >1,80 (.071) >1,80 (.071) 8,00 (.315) 8,00 (.315) 5,75 (.226) 8,00 (.315) 6,50 (.256) 7,25 (.285) 7,25 (.285) 6,50 (.256) 5,75 (.226) 6,50 (.256) 6,50 (.256) 5,75 (.226) 6,50 (.256) 6,50 (.256) 5,75 (.226) 13,60 (.535) 13,60 (.535) 13,60 (.535) 60 60 CBC20K00-060WDU1-509-1-VR CBC20K00-060WDU1-601-1-VR 22 22 >1,80 (.071) >1,80 (.071) 5,75 (.226) 5,00 (.197) 5,75 (.226) 7,25 (.285) 5,75 (.226) 5,00 (.197) 5,75 (.226) 5,00 (.197) 5,75 (.226) 5,00 (.197) 13,60 (.535) 13,60 (.535) 60 60 60 CBC20K00-060WDU1-603-1-VR CBC20K00-060WDU1-604-1-VR CBC20K00-060WDU1-605-1-VR 22 22 22 >1,80 (.071) >1,80 (.071) >1,80 (.071) 8,00 (.315) 7,25 (.285) 6,50 (.256) 8,00 (.315) 7,25 (.285) 6,50 (.256) 8,00 (.315) 7,25 (.285) 5,75 (.226) 8,00 (.315) 7,25 (.285) 6,50 (.256) 8,00 (.315) 7,25 (.285) 6,50 (.256) 13,60 (.535) 13,60 (.535) 13,60 (.535) 60 CBC20K00-060WDV2-501-1-VR 22 >1,80 (.071) 5,00 (.197) 5,00 (.197) 5,00 (.197) 5,00 (.197) 5,00 (.197) 17,00 (.669) 60 60 60 60 60 CBC20K00-060WDV2-502-1-VR CBC20K00-060WDV2-503-1-VR CBC20K00-060WDV2-504-1-VR CBC20K00-060WDV2-505-1-VR CBC20K00-060WDV2-506-1-VR 22 22 22 22 22 >1,80 >1,80 >1,80 >1,80 >1,80 (.071) (.071) (.071) (.071) (.071) 6,50 6,50 7,25 6,50 8,00 (.256) (.256) (.285) (.256) (.315) 5,00 5,75 6,50 6,50 8,00 (.197) (.226) (.256) (.256) (.315) 5,00 5,75 6,50 6,50 7,25 (.197) (.226) (.256) (.256) (.285) 5,00 6,50 6,50 6,50 6,50 (.197) (.256) (.256) (.256) (.256) 5,00 5,75 7,25 6,50 6,50 (.197) (.226) (.285) (.256) (.256) 17,00 17,00 17,00 17,00 17,00 (.669) (.669) (.669) (.669) (.669) 60 60 60 60 60 CBC20K00-060WDV2-507-1-VR CBC20K00-060WDV2-508-1-VR CBC20K00-060WDV2-509-1-VR CBC20K00-060WDV2-601-1-VR CBC20K00-060WDV2-603-1-VR 22 22 22 22 22 >1,80 >1,80 >1,80 >1,80 >1,80 (.071) (.071) (.071) (.071) (.071) 8,00 5,75 5,75 5,00 8,00 (.315) (.226) (.226) (.197) (.315) 6,50 7,25 5,75 7,25 8,00 (.256) (.285) (.226) (.285) (.315) 6,50 5,75 5,75 5,00 8,00 (.256) (.226) (.226) (.197) (.315) 6,50 5,75 5,75 5,00 8,00 (.256) (.226) (.226) (.197) (.315) 6,50 5,75 5,75 5,00 8,00 (.256) (.226) (.226) (.197) (.315) 17,00 17,00 17,00 17,00 17,00 (.669) (.669) (.669) (.669) (.669) 60 60 CBC20K00-060WDV2-604-1-VR CBC20K00-060WDV2-605-1-VR 22 22 >1,80 (.071) >1,80 (.071) 7,25 (.285) 6,50 (.256) 7,25 (.285) 6,50 (.256) 7,25 (.285) 5,75 (.226) 7,25 (.285) 6,50 (.256) 7,25 (.285) 6,50 (.256) 17,00 (.669) 17,00 (.669) Dimensions are shown mm (inch) Dimensions subject to change 41 www.ittcannon.com Tempus CBC 20 2 mm Interconnect Male Signal Modules - Press Fit Termination - 5 Row 4,30 (.169) 5,00 (.197) 1 13,50 17,80 0,50 (.532) (.701) (.020) 2,00 (.079) 5,95 (.234) 24 120 Contacts 17,00 (.669) Recommended PCB Hole Pattern Component Side 8,00 (.315) 2,00 (.079) 2,00 (.079) 0,70 (.028) 18,00 MIN (.709) Refer to design notes page 73 for circuit board drill and hole plating details. Contacts Order Number Packaging Units Mating Length PCB Thickness row A row B row C Termination Length row D row E 120 120 120 CBC20K00-120WDP1-501-1-VR CBC20K00-120WDP1-502-1-VR CBC20K00-120WDP1-503-1-VR 11 11 11 >1,80 (.071) >1,80 (.071) >1,80 (.071) 5,00 (.197) 6,50 (.256) 6,50 (.256) 5,00 (.197) 5,00 (.197) 5,75 (.226) 5,00 (.197) 5,00 (.197) 5,75 (.226) 5,00 (.197) 5,00 (.197) 6,50 (.256) 5,00 (.197) 5,00 (.197) 5,75 (.226) 4,30 (.169) 4,30 (.169) 4,30 (.169) 120 120 120 120 CBC20K00-120WDP1-504-1-VR CBC20K00-120WDP1-505-1-VR CBC20K00-120WDP1-506-1-VR CBC20K00-120WDP1-507-1-VR 11 11 11 11 >1,80 >1,80 >1,80 >1,80 7,25 6,50 8,00 8,00 6,50 6,50 8,00 6,50 6,50 6,50 7,25 6,50 6,50 6,50 6,50 6,50 7,25 6,50 6,50 6,50 4,30 4,30 4,30 4,30 120 CBC20K00-120WDP1-508-1-VR 11 >1,80 (.071) 5,75 (.226) 7,25 (.285) 5,75 (.226) 5,75 (.226) 5,75 (.226) 4,30 (.169) 120 120 120 120 CBC20K00-120WDP1-509-1-VR CBC20K00-120WDP1-601-1-VR CBC20K00-120WDP1-603-1-VR CBC20K00-120WDP1-604-1-VR 11 11 11 11 >1,80 >1,80 >1,80 >1,80 5,75 5,00 8,00 7,25 5,75 7,25 8,00 7,25 5,75 5,00 8,00 7,25 5,75 5,00 8,00 7,25 5,75 5,00 8,00 7,25 4,30 4,30 4,30 4,30 120 CBC20K00-120WDP1-605-1-VR 11 >1,80 (.071) (.071) (.071) (.071) (.071) (.071) (.071) (.071) (.071) (.285) (.256) (.315) (.315) (.226) (.197) (.315) (.285) 6,50 (.256) (.256) (.256) (.315) (.256) (.226) (.285) (.315) (.285) 6,50 (.256) (.256) (.256) (.285) (.256) (.226) (.197) (.315) (.285) 5,75 (.226) (.256) (.256) (.256) (.256) (.226) (.197) (.315) (.285) 6,50 (.256) (.285) (.256) (.256) (.256) (.226) (.197) (.315) (.285) 6,50 (.256) (.169) (.169) (.169) (.169) 4,30 (.169) Dimensions are shown mm (inch) Dimensions subject to change 42 (.169) (.169) (.169) (.169) www.ittcannon.com Tempus CBC 20 2 mm Interconnect Male Signal Modules - Press Fit Termination - 5 Row Contacts Order Number Packaging Units Mating Length PCB Thickness row A row B row C Termination Length row D row E 120 120 120 CBC20K00-120WDP3-501-1-VR CBC20K00-120WDP3-502-1-VR CBC20K00-120WDP3-503-1-VR 11 11 11 >1,80 (.071) >1,80 (.071) >1,80 (.071) 5,00 (.197) 6,50 (.256) 6,50 (.256) 5,00 (.197) 5,00 (.197) 5,75 (.226) 5,00 (.197) 5,00 (.197) 5,75 (.226) 5,00 (.197) 5,00 (.197) 6,50 (.256) 5,00 (.197) 5,00 (.197) 5,75 (.226) 4,30 (.169) 4,30 (.169) 4,30 (.169) 120 120 120 120 120 CBC20K00-120WDP3-504-1-VR CBC20K00-120WDP3-505-1-VR CBC20K00-120WDP3-506-1-VR CBC20K00-120WDP3-507-1-VR CBC20K00-120WDP3-508-1-VR 11 11 11 11 11 >1,80 >1,80 >1,80 >1,80 >1,80 (.071) (.071) (.071) (.071) (.071) 7,25 6,50 8,00 8,00 5,75 (.285) (.256) (.315) (.315) (.226) 6,50 6,50 8,00 6,50 7,25 (.256) (.256) (.315) (.256) (.285) 6,50 6,50 7,25 6,50 5,75 (.256) (.256) (.285) (.256) (.226) 6,50 6,50 6,50 6,50 5,75 (.256) (.256) (.256) (.256) (.226) 7,25 6,50 6,50 6,50 5,75 (.285) (.256) (.256) (.256) (.226) 4,30 4,30 4,30 4,30 4,30 (.169) (.169) (.169) (.169) (.169) 120 120 120 120 CBC20K00-120WDP3-509-1-VR CBC20K00-120WDP3-601-1-VR CBC20K00-120WDP3-603-1-VR CBC20K00-120WDP3-604-1-VR 11 11 11 11 >1,80 >1,80 >1,80 >1,80 (.071) (.071) (.071) (.071) 5,75 5,00 8,00 7,25 (.226) (.197) (.315) (.285) 5,75 7,25 8,00 7,25 (.226) (.285) (.315) (.285) 5,75 5,00 8,00 7,25 (.226) (.197) (.315) (.285) 5,75 5,00 8,00 7,25 (.226) (.197) (.315) (.285) 5,75 5,00 8,00 7,25 (.226) (.197) (.315) (.285) 4,30 4,30 4,30 4,30 (.169) (.169) (.169) (.169) 120 CBC20K00-120WDP3-605-1-VR 11 >1,80 (.071) 6,50 (.256) 6,50 (.256) 5,75 (.226) 6,50 (.256) 6,50 (.256) 4,30 (.169) 120 120 120 CBC20K00-120WDU1-501-1-VR CBC20K00-120WDU1-502-1-VR CBC20K00-120WDU1-503-1-VR 11 11 11 >1,80 (.071) >1,80 (.071) >1,80 (.071) 5,00 (.197) 6,50 (.256) 6,50 (.256) 5,00 (.197) 5,00 (.197) 5,75 (.226) 5,00 (.197) 5,00 (.197) 5,75 (.226) 5,00 (.197) 5,00 (.197) 6,50 (.256) 5,00 (.197) 5,00 (.197) 5,75 (.226) 13,60 (.535) 13,60 (.535) 13,60 (.535) 120 120 CBC20K00-120WDU1-504-1-VR CBC20K00-120WDU1-505-1-VR 11 11 >1,80 (.071) >1,80 (.071) 7,25 (.285) 6,50 (.256) 6,50 (.256) 6,50 (.256) 6,50 (.256) 6,50 (.256) 6,50 (.256) 6,50 (.256) 7,25 (.285) 6,50 (.256) 13,60 (.535) 13,60 (.535) 120 120 120 CBC20K00-120WDU1-506-1-VR CBC20K00-120WDU1-507-1-VR CBC20K00-120WDU1-508-1-VR 11 11 11 >1,80 (.071) >1,80 (.071) >1,80 (.071) 8,00 (.315) 8,00 (.315) 5,75 (.226) 8,00 (.315) 6,50 (.256) 7,25 (.285) 7,25 (.285) 6,50 (.256) 5,75 (.226) 6,50 (.256) 6,50 (.256) 5,75 (.226) 6,50 (.256) 6,50 (.256) 5,75 (.226) 13,60 (.535) 13,60 (.535) 13,60 (.535) 120 120 CBC20K00-120WDU1-509-1-VR CBC20K00-120WDU1-601-1-VR 11 11 >1,80 (.071) >1,80 (.071) 5,75 (.226) 5,00 (.197) 5,75 (.226) 7,25 (.285) 5,75 (.226) 5,00 (.197) 5,75 (.226) 5,00 (.197) 5,75 (.226) 5,00 (.197) 13,60 (.535) 13,60 (.535) 120 120 120 CBC20K00-120WDU1-603-1-VR CBC20K00-120WDU1-604-1-VR CBC20K00-120WDU1-605-1-VR 11 11 11 >1,80 (.071) >1,80 (.071) >1,80 (.071) 8,00 (.315) 7,25 (.285) 6,50 (.256) 8,00 (.315) 7,25 (.285) 6,50 (.256) 8,00 (.315) 7,25 (.285) 5,75 (.226) 8,00 (.315) 7,25 (.285) 6,50 (.256) 8,00 (.315) 7,25 (.285) 6,50 (.256) 13,60 (.535) 13,60 (.535) 13,60 (.535) 120 CBC20K00-120WDV2-501-1-VR 11 >1,80 (.071) 5,00 (.197) 5,00 (.197) 5,00 (.197) 5,00 (.197) 5,00 (.197) 17,00 (.669) 120 120 120 120 CBC20K00-120WDV2-502-1-VR CBC20K00-120WDV2-503-1-VR CBC20K00-120WDV2-504-1-VR CBC20K00-120WDV2-505-1-VR 11 11 11 11 >1,80 >1,80 >1,80 >1,80 6,50 6,50 7,25 6,50 5,00 5,75 6,50 6,50 5,00 5,75 6,50 6,50 5,00 6,50 6,50 6,50 5,00 5,75 7,25 6,50 17,00 17,00 17,00 17,00 120 120 120 CBC20K00-120WDV2-506-1-VR CBC20K00-120WDV2-507-1-VR CBC20K00-120WDV2-508-1-VR 11 11 11 >1,80 (.071) >1,80 (.071) >1,80 (.071) 8,00 (.315) 8,00 (.315) 5,75 (.226) 8,00 (.315) 6,50 (.256) 7,25 (.285) 7,25 (.285) 6,50 (.256) 5,75 (.226) 6,50 (.256) 6,50 (.256) 5,75 (.226) 6,50 (.256) 6,50 (.256) 5,75 (.226) 17,00 (.669) 17,00 (.669) 17,00 (.669) 120 120 120 120 120 CBC20K00-120WDV2-509-1-VR CBC20K00-120WDV2-601-1-VR CBC20K00-120WDV2-603-1-VR CBC20K00-120WDV2-604-1-VR CBC20K00-120WDV2-605-1-VR 11 11 11 11 11 >1,80 >1,80 >1,80 >1,80 >1,80 5,75 5,00 8,00 7,25 6,50 5,75 7,25 8,00 7,25 6,50 5,75 5,00 8,00 7,25 5,75 5,75 5,00 8,00 7,25 6,50 5,75 5,00 8,00 7,25 6,50 17,00 17,00 17,00 17,00 17,00 (.071) (.071) (.071) (.071) (.071) (.071) (.071) (.071) (.071) (.256) (.256) (.285) (.256) (.226) (.197) (.315) (.285) (.256) (.197) (.226) (.256) (.256) (.226) (.285) (.315) (.285) (.256) (.197) (.226) (.256) (.256) (.226) (.197) (.315) (.285) (.226) (.197) (.256) (.256) (.256) (.226) (.197) (.315) (.285) (.256) (.197) (.226) (.285) (.256) (.226) (.197) (.315) (.285) (.256) (.669) (.669) (.669) (.669) (.669) (.669) (.669) (.669) (.669) Dimensions are shown mm (inch) Dimensions subject to change 43 www.ittcannon.com Tempus CBC 20 2 mm Interconnect Male Signal Modules - Press Fit Termination - 5 Row 95,94 (3.777) 5,00 (.197) 4,30 (.169) 94,00 (3.701) 1 0,50 (.020) 2,00 (.079) 5,95 (.234) 13,50 (.532) 48 17,80 (.701) 17,00 (.669) 240 Contacts Recommended PCB Hole Pattern Component Side 8,00 (.315) 2,00 (.079) 2,00 (.079) 0,70 (.028) 18,00 MIN (.709) Refer to design notes page 73 for circuit board drill and hole plating details. Contacts Order Number Packaging Units Mating Length PCB Thickness row A row D row E 240 240 CBC20K00-240WDP1-501-1-VR CBC20K00-240WDP1-502-1-VR 5 5 >1,80 (.071) >1,80 (.071) 5,00 (.197) 6,50 (.256) 5,00 (.197) 5,00 (.197) 5,00 (.197) 5,00 (.197) 5,00 (.197) 5,00 (.197) 5,00 (.197) 5,00 (.197) 4,30 (.169) 4,30 (.169) 240 240 240 240 CBC20K00-240WDP1-503-1-VR CBC20K00-240WDP1-504-1-VR CBC20K00-240WDP1-505-1-VR CBC20K00-240WDP1-506-1-VR 5 5 5 5 >1,80 >1,80 >1,80 >1,80 (.071) (.071) (.071) (.071) 6,50 7,25 6,50 8,00 (.256) (.285) (.256) (.315) 5,75 6,50 6,50 8,00 (.226) (.256) (.256) (.315) 5,75 6,50 6,50 7,25 (.226) (.256) (.256) (.285) 6,50 6,50 6,50 6,50 (.256) (.256) (.256) (.256) 5,75 7,25 6,50 6,50 (.226) (.285) (.256) (.256) 4,30 4,30 4,30 4,30 (.169) (.169) (.169) (.169) 240 240 240 240 240 CBC20K00-240WDP1-507-1-VR CBC20K00-240WDP1-508-1-VR CBC20K00-240WDP1-509-1-VR CBC20K00-240WDP1-601-1-VR CBC20K00-240WDP1-603-1-VR 5 5 5 5 5 >1,80 >1,80 >1,80 >1,80 >1,80 (.071) (.071) (.071) (.071) (.071) 8,00 5,75 5,75 5,00 8,00 (.315) (.226) (.226) (.197) (.315) 6,50 7,25 5,75 7,25 8,00 (.256) (.285) (.226) (.285) (.315) 6,50 5,75 5,75 5,00 8,00 (.256) (.226) (.226) (.197) (.315) 6,50 5,75 5,75 5,00 8,00 (.256) (.226) (.226) (.197) (.315) 6,50 5,75 5,75 5,00 8,00 (.256) (.226) (.226) (.197) (.315) 4,30 4,30 4,30 4,30 4,30 (.169) (.169) (.169) (.169) (.169) 240 240 CBC20K00-240WDP1-604-1-VR CBC20K00-240WDP1-605-1-VR 5 5 >1,80 (.071) >1,80 (.071) 7,25 (.285) 6,50 (.256) row B 7,25 (.285) 6,50 (.256) row C Termination Length 7,25 (.285) 5,75 (.226) 7,25 (.285) 6,50 (.256) 7,25 (.285) 6,50 (.256) 4,30 (.169) 4,30 (.169) Dimensions are shown mm (inch) Dimensions subject to change 44 www.ittcannon.com Tempus CBC 20 2 mm Interconnect Male Signal Modules - Press Fit Termination - 5 Row Contacts Order Number Mating Length PCB Packaging Thickness Units row A row B row C Termination Length row D row E 240 CBC20K00-240WDP3-501-1-VR 5 >1,80 (.071) 5,00 (.197) 5,00 (.197) 5,00 (.197) 5,00 (.197) 5,00 (.197) 4,30 (.169) 240 240 CBC20K00-240WDP3-502-1-VR CBC20K00-240WDP3-503-1-VR 5 5 >1,80 (.071) >1,80 (.071) 6,50 (.256) 6,50 (.256) 5,00 (.197) 5,75 (.226) 5,00 (.197) 5,75 (.226) 5,00 (.197) 6,50 (.256) 5,00 (.197) 5,75 (.226) 4,30 (.169) 4,30 (.169) 240 240 CBC20K00-240WDP3-504-1-VR CBC20K00-240WDP3-505-1-VR 5 5 >1,80 (.071) >1,80 (.071) 7,25 (.285) 6,50 (.256) 6,50 (.256) 6,50 (.256) 6,50 (.256) 6,50 (.256) 6,50 (.256) 6,50 (.256) 7,25 (.285) 6,50 (.256) 4,30 (.169) 4,30 (.169) 240 240 CBC20K00-240WDP3-506-1-VR CBC20K00-240WDP3-507-1-VR 5 5 >1,80 (.071) >1,80 (.071) 8,00 (.315) 8,00 (.315) 8,00 (.315) 6,50 (.256) 7,25 (.285) 6,50 (.256) 6,50 (.256) 6,50 (.256) 6,50 (.256) 6,50 (.256) 4,30 (.169) 4,30 (.169) 240 240 240 CBC20K00-240WDP3-508-1-VR CBC20K00-240WDP3-509-1-VR CBC20K00-240WDP3-601-1-VR 5 5 5 >1,80 (.071) >1,80 (.071) >1,80 (.071) 5,75 (.226) 5,75 (.226) 5,00 (.197) 7,25 (.285) 5,75 (.226) 7,25 (.285) 5,75 (.226) 5,75 (.226) 5,00 (.197) 5,75 (.226) 5,75 (.226) 5,00 (.197) 5,75 (.226) 5,75 (.226) 5,00 (.197) 4,30 (.169) 4,30 (.169) 4,30 (.169) 240 240 CBC20K00-240WDP3-603-1-VR CBC20K00-240WDP3-604-1-VR 5 5 >1,80 (.071) >1,80 (.071) 8,00 (.315) 7,25 (.285) 8,00 (.315) 7,25 (.285) 8,00 (.315) 7,25 (.285) 8,00 (.315) 7,25 (.285) 8,00 (.315) 7,25 (.285) 4,30 (.169) 4,30 (.169) 240 CBC20K00-240WDP3-605-1-VR 5 >1,80 (.071) 6,50 (.256) 6,50 (.256) 5,75 (.226) 6,50 (.256) 6,50 (.256) 4,30 (.169) 240 CBC20K00-240WDU1-501-1-VR 5 >1,80 (.071) 5,00 (.197) 5,00 (.197) 5,00 (.197) 5,00 (.197) 5,00 (.197) 13,60 (.535) 240 240 CBC20K00-240WDU1-502-1-VR CBC20K00-240WDU1-503-1-VR 5 5 >1,80 (.071) >1,80 (.071) 6,50 (.256) 6,50 (.256) 5,00 (.197) 5,75 (.226) 5,00 (.197) 5,75 (.226) 5,00 (.197) 6,50 (.256) 5,00 (.197) 5,75 (.226) 13,60 (.535) 13,60 (.535) 240 240 240 CBC20K00-240WDU1-504-1-VR CBC20K00-240WDU1-505-1-VR CBC20K00-240WDU1-506-1-VR 5 5 5 >1,80 (.071) >1,80 (.071) >1,80 (.071) 7,25 (.285) 6,50 (.256) 8,00 (.315) 6,50 (.256) 6,50 (.256) 8,00 (.315) 6,50 (.256) 6,50 (.256) 7,25 (.285) 6,50 (.256) 6,50 (.256) 6,50 (.256) 7,25 (.285) 6,50 (.256) 6,50 (.256) 13,60 (.535) 13,60 (.535) 13,60 (.535) 240 240 CBC20K00-240WDU1-507-1-VR CBC20K00-240WDU1-508-1-VR 5 5 >1,80 (.071) >1,80 (.071) 8,00 (.315) 5,75 (.226) 6,50 (.256) 7,25 (.285) 6,50 (.256) 5,75 (.226) 6,50 (.256) 5,75 (.226) 6,50 (.256) 5,75 (.226) 13,60 (.535) 13,60 (.535) 240 240 240 CBC20K00-240WDU1-509-1-VR CBC20K00-240WDU1-601-1-VR CBC20K00-240WDU1-603-1-VR 5 5 5 >1,80 (.071) >1,80 (.071) >1,80 (.071) 5,75 (.226) 5,00 (.197) 8,00 (.315) 5,75 (.226) 7,25 (.285) 8,00 (.315) 5,75 (.226) 5,00 (.197) 8,00 (.315) 5,75 (.226) 5,00 (.197) 8,00 (.315) 5,75 (.226) 5,00 (.197) 8,00 (.315) 13,60 (.535) 13,60 (.535) 13,60 (.535) 240 240 CBC20K00-240WDU1-604-1-VR CBC20K00-240WDU1-605-1-VR 5 5 >1,80 (.071) >1,80 (.071) 7,25 (.285) 6,50 (.256) 7,25 (.285) 6,50 (.256) 7,25 (.285) 5,75 (.226) 7,25 (.285) 6,50 (.256) 7,25 (.285) 6,50 (.256) 13,60 (.535) 13,60 (.535) 240 240 240 240 240 CBC20K00-240WDV2-501-1-VR CBC20K00-240WDV2-502-1-VR CBC20K00-240WDV2-503-1-VR CBC20K00-240WDV2-504-1-VR CBC20K00-240WDV2-505-1-VR 5 5 5 5 5 >1,80 >1,80 >1,80 >1,80 >1,80 (.071) (.071) (.071) (.071) (.071) 5,00 6,50 6,50 7,25 6,50 (.197) (.256) (.256) (.285) (.256) 5,00 5,00 5,75 6,50 6,50 (.197) (.197) (.226) (.256) (.256) 5,00 5,00 5,75 6,50 6,50 (.197) (.197) (.226) (.256) (.256) 5,00 5,00 6,50 6,50 6,50 (.197) (.197) (.256) (.256) (.256) 5,00 5,00 5,75 7,25 6,50 (.197) (.197) (.226) (.285) (.256) 17,00 17,00 17,00 17,00 17,00 (.669) (.669) (.669) (.669) (.669) 240 240 240 240 240 240 CBC20K00-240WDV2-506-1-VR CBC20K00-240WDV2-507-1-VR CBC20K00-240WDV2-508-1-VR CBC20K00-240WDV2-509-1-VR CBC20K00-240WDV2-601-1-VR CBC20K00-240WDV2-603-1-VR 5 5 5 5 5 5 >1,80 >1,80 >1,80 >1,80 >1,80 >1,80 (.071) (.071) (.071) (.071) (.071) (.071) 8,00 8,00 5,75 5,75 5,00 8,00 (.315) (.315) (.226) (.226) (.197) (.315) 8,00 6,50 7,25 5,75 7,25 8,00 (.315) (.256) (.285) (.226) (.285) (.315) 7,25 6,50 5,75 5,75 5,00 8,00 (.285) (.256) (.226) (.226) (.197) (.315) 6,50 6,50 5,75 5,75 5,00 8,00 (.256) (.256) (.226) (.226) (.197) (.315) 6,50 6,50 5,75 5,75 5,00 8,00 (.256) (.256) (.226) (.226) (.197) (.315) 17,00 17,00 17,00 17,00 17,00 17,00 (.669) (.669) (.669) (.669) (.669) (.669) 240 240 CBC20K00-240WDV2-604-1-VR CBC20K00-240WDV2-605-1-VR 5 5 >1,80 (.071) >1,80 (.071) 7,25 (.285) 6,50 (.256) 7,25 (.285) 6,50 (.256) 7,25 (.285) 5,75 (.226) 7,25 (.285) 6,50 (.256) 7,25 (.285) 6,50 (.256) 17,00 (.669) 17,00 (.669) Dimensions are shown mm (inch) Dimensions subject to change 45 www.ittcannon.com Tempus CBC 20 2 mm Interconnect Male Power Modules - Press Fit/Solder Termination - 5 Row Features • • Designed to conform with IEC61076-4-104, EIAis64, IEEE P896 Futurebus+, IEEE P1596 SCI and IEC 917 metric modular order • Sequential mating provides live insertion capability • High performance contacts, high hertz stress, 1000 cycles minimum Stackable with other TEMPUS modules, with no loss of positions • Wide wall design for system tolerant 2,50 (.098) out-of-centre board insertion • High temperature materials, not affected by reflow solder process Technical Data Mechanical Data Contact Pitch Polarisation Coding Housing Material Termination solder Termination p.t.h. (solder) Termination Press Fit Termination p.t.h. (press fit) Board Guiding Left to Right Top to Bottom Board Slot Pitch Contact Material Hertz Stress Class 1 Plating Insertion Force Withdrawal Force 2,00 x 2,00 (.079 x .079) By design With coding key, see page 64 Liquid Crystal Polymer, UL94V-0 or PPS. UL94V-0 Solder tail, tin / lead plated ø 0,60 (.024), refer to page 73 Eye of the needle compliant section, tin/lead plated ø 0,70 (.028) refer to page 73 2,50 - 2,50 (.100 - .100) 1,50 - 1,50 (.060 - .060) 16,00 (.630) min. Solder Contact: brass; press fit contact: phosphor bronze 1200 MPa (174 klbf / sq. in.) 1000 cycles minimum Palladium Nickel plus Gold over Nickel 1,50 N (1.6 oz) max. per contact 0,30 N (0,5 oz) min. per contact Electrical Data Current Rating 4,00 A at 25°C; 3,00 A at 70°C Withstanding Voltage 1000 Vrms Insulation Resistance Initial: 5000MΩ; after climatic test: 1000 MΩ Contact Resistance 25 mΩ maximum Dimensions are shown mm (inch) Dimensions subject to change 46 www.ittcannon.com Tempus CBC 20 2 mm Interconnect Male Power Modules - Press Fit/Solder Termination - 5 Row 11,94 (.470) 6,00 (.238) 6,50 (.256) Recommended PCB Hole Pattern Component Side 8,00 (.315) 2 5 13,50 (.532) 17,80 (.701) 10 Contacts 2,00 (.079) 2,00 (.079) 6,10 (.240) 17,00 (.669) 2,00 (.079) 2,88 (.113) 0,70 (.028) 18,00 MIN (.709) 4,30 Pressfit Length (.169) 18,00 MIN (.709) 2,00 (.079) 10,00 (.394) Ø1,30 (.051) 4,60 Solder Tail Length (.181) 2,00 (.079) 14,00 (.551) 2,00 (.079) Ø0,60 (.024) Dimensions are shown mm (inch) Dimensions subject to change 47 www.ittcannon.com Tempus CBC 20 2 mm Interconnect Male Power Modules - Press Fit/Solder Termination - 5 Row Contacts Order Number Packaging Units Mating Length PCB Thickness (.071) (.071) (.071) (.071) Termination Length row A row B row C row D row E 7,25 6,50 8,00 8,00 6,50 6,50 8,00 6,50 6,50 6,50 7,25 6,50 6,50 6,50 6,50 6,50 7,25 6,50 6,50 6,50 10 10 10 10 CBC20K90-010WDP1-504-1-VR CBC20K90-010WDP1-505-1-VR CBC20K90-010WDP1-506-1-VR CBC20K90-010WDP1-507-1-VR 44 44 44 44 >1,80 >1,80 >1,80 >1,80 10 10 CBC20K90-010WDP1-603-1-VR CBC20K90-010WDP1-604-1-VR 44 44 >1,80 (.071) >1,80 (.071) 8,00 (.315) 7,25 (.285) 8,00 (.315) 7,25 (.285) 8,00 (.315) 7,25 (.285) 8,00 (.315) 7,25 (.285) 8,00 (.315) 4,30 (.169) 7,25 (.285) 4,30 (.169) 10 10 CBC20K90-010WDP3-504-1-VR CBC20K90-010WDP3-505-1-VR 44 44 >1,80 (.071) >1,80 (.071) 7,25 (.285) 6,50 (.256) 6,50 (.256) 6,50 (.256) 6,50 (.256) 6,50 (.256) 6,50 (.256) 6,50 (.256) 7,25 (.285) 4,30 (.169) 6,50 (.256) 4,30 (.169) 10 10 10 CBC20K90-010WDP3-506-1-VR CBC20K90-010WDP3-507-1-VR CBC20K90-010WDP3-603-1-VR 44 44 44 >1,80 (.071) >1,80 (.071) >1,80 (.071) 8,00 (.315) 8,00 (.315) 8,00 (.315) 8,00 (.315) 6,50 (.256) 8,00 (.315) 7,25 (.285) 6,50 (.256) 8,00 (.315) 6,50 (.256) 6,50 (.256) 8,00 (.315) 6,50 (.256) 4,30 (.169) 6,50 (.256) 4,30 (.169) 8,00 (.315) 4,30 (.169) 10 CBC20K90-010WDP3-604-1-VR 44 >1,80 (.071) 7,25 (.285) 7,25 (.285) 7,25 (.285) 7,25 (.285) 7,25 (.285) 4,30 (.169) 10 10 10 CBC20K90-010WDU1-504-1-VR CBC20K90-010WDU1-505-1-VR CBC20K90-010WDU1-506-1-VR 44 44 44 >1,80 (.071) >1,80 (.071) >1,80 (.071) 7,25 (.285) 6,50 (.256) 8,00 (.315) 6,50 (.256) 6,50 (.256) 8,00 (3.15) 6,50 (.256) 6,50 (.256) 7,25 (.285) 6,50 (.256) 6,50 (.256) 6,50 (.256) 7,25 (.285) 13,60 (.535) 6,50 (.256) 13,60 (.535) 6,50 (.256) 13,60 (.535) 10 10 CBC20K90-010WDU1-507-1-VR CBC20K90-010WDU1-603-1-VR 44 44 >1,80 (.071) >1,80 (.071) 8,00 (.315) 8,00 (.315) 6,50 (.256) 8,00 (.315) 6,50 (.256) 8,00 (.315) 6,50 (.256) 8,00 (.315) 6,50 (.256) 13,60 (.535) 8,00 (.315) 13,60 (.535) 10 CBC20K90-010WDU1-604-1-VR 44 >1,80 (.071) 7,25 (.285) 7,25 (.285) 7,25 (.285) 7,25 (.285) 7,25 (.285) 13,60 (.535) 10 CBC20K90-010WDV2-504-1-VR 44 >1,80 (.071) 7,25 (.285) 6,50 (.256) 6,50 (.256) 6,50 (.256) 7,25 (.285) 17,00 (.669) 10 10 CBC20K90-010WDV2-505-1-VR CBC20K90-010WDV2-506-1-VR 44 44 >1,80 (.071) >1,80 (.071) 6,50 (.256) 8,00 (.315) 6,50 (.256) 8,00 (.315) 6,50 (.256) 7,25 (.285) 6,50 (.256) 6,50 (.256) 6,50 (.256) 17,00 (.669) 6,50 (.256) 17,00 (.669) 10 10 10 CBC20K90-010WDV2-507-1-VR CBC20K90-010WDV2-603-1-VR CBC20K90-010WDV2-604-1-VR 44 44 44 >1,80 (.071) >1,80 (.071) >1,80 (.071) 8,00 (.315) 8,00 (.315) 7,25 (.285 6,50 (.256) 8,00 (.315) 7,25 (.285) 6,50 (.256) 8,00 (.315) 7,25 (.285) 6,50 (.256) 8,00 (.315) 7,25 (.285) 6,50 (.256) 17,00 (.669) 8,00 (.315) 17,00 (.669) 7,25 (.285) 17,00 (.669) 10 CBC20K90-010WDS1-504-1-VR 44 3,20 (.126) 7,25 (.285) 6,50 (.256) 6,50 (.256) 6,50 (.256) 7,25 (.285) 4,60 (.181) 10 10 10 CBC20K90-010WDS1-505-1-VR CBC20K90-010WDS1-506-1-VR CBC20K90-010WDS1-507-1-VR 44 44 44 3,20 (.126) 3,20 (.126) 3,20 (.126) 6,50 (.256) 8,00 (.315) 8,00 (.315) 6,50 (.256) 8,00 (.315) 6,50 (.256) 6,50 (.256) 7,25 (.285) 6,50 (.256) 6,50 (.256) 6,50 (.256) 6,50 (.256) 6,50 (.256) 4,60 (.181) 6,50 (.256) 4,60 (.181) 6,50 (.256) 4,60 (.181) 10 10 CBC20K90-010WDS1-603-1-VR CBC20K90-010WDS1-604-1-VR 44 44 3,20 (.126) 3,20 (.126) 8,00 (.315) 8,00 (.315) 8,00 (.315) 7,25 (.285) 8,00 (.315) 7,25 (.285) 8,00 (.315) 7,25 (.285) 8,00 (.315) 4,60 (.181) 7,25 (.285) 4,60 (.181) 10 CBC20K90-010WDS2-504-1-VR 44 2,40 (.094) 7,25 (.285) 6,50 (.256) 6,50 (.256) 6,50 (.256) 7,25 (.285) 3,60 (.142) 10 10 10 10 10 CBC20K90-010WDS2-505-1-VR CBC20K90-010WDS2-506-1-VR CBC20K90-010WDS2-507-1-VR CBC20K90-010WDS2-603-1-VR CBC20K90-010WDS2-604-1-VR 44 44 44 44 44 2,40 2,40 2,40 2,40 2,40 6,50 8,00 8,00 8,00 7,25 6,50 8,00 6,50 8,00 7,25 6,50 7,25 6,50 8,00 7,25 6,50 6,50 6,50 8,00 7,25 6,50 6,50 6,50 8,00 7,25 (.094) (.094) (.094) (.094) (.094) (.285) (.256) (.315) (.315) (.256) (.315) (.315) (.315) (.285) (.256) (.256) (.315) (.256) (.256) (.315) (.256) (.315) (.256) (.256) (.256) (.285) (.256) (.256) (.285) (.256) (.315) (.285) (.256) (.256) (.256) (.256) (.256) (.256) (.256) (.315) (.285) (.285) (.256) (.256) (.256) (.256) (.256) (.256) (.315) (.285) 4,30 4,30 4,30 4,30 3,60 3,60 3,60 3,60 3,60 (.169) (.169) (.169) (.169) (.142) (.142) (.142) (.142) (.142) Dimensions are shown mm (inch) Dimensions subject to change 48 www.ittcannon.com Tempus CBC 20 2 mm Interconnect Male Right-Angle Signal Module - Wide Wall - Solder and Pressfit Termination - 4 Row Features • • Designed to conform with IEC61076-4-104, EIAis64, IEEE P896 Futurebus+, IEEE P1596 SCI and IEC 917 metric modular order • 45° legform for optimum electrical performance • High temperature materials, not affected by reflow solder process • High performance contacts, high hertz stress, 1000 cycles minimum • Wide wall design for system tolerant 2,50 (.098) out-of-centre board insertion Stackable with other TEMPUS modules, with no loss of positions • High I/O, 20 contacts per linear centimetre (51 contacts per linear inch) Technical Data Mechanical Data Contact Pitch Polarisation Coding Housing Material Termination Solder Termination p.t.h.(solder) Termination Press-fit Termination p.t.h. (press-fit) Board Retention Board Guiding Left to Right Top to Bottom Board Slot Pitch Contact Material Hertz Stress Class 1 Plating Insertion Force Withdrawal Force 2,00 x 2,00 (.079 x .079) By design With coding key, see page 64 Liquid Crystal Polymer, UL94V-0 or PPS, UL94V-0 Solder tail, tin/lead plated ø 0,60 (.024), refer to page 73 Eye of needle compliant section, tin/lead plated ø 0,70 (.028), refer to page 73 Pushfit peg or heat stake 2,50 - 2,50 (.100 - .100) 1,50 - 1,50 (.060 - .060) 16,00 (.630) min. Phosphor bronze 1200 MPa (174 klbf / sq. in.) 1000 cycles minimum Palladium Nickel plus Gold over Nickel 0,45 N (1.6 oz) max. per contact 0,15 N (0,5 oz) min. per contact Electrical Data Current Rating 1,50 A at 25°C; 1,00 A at 70°C Withstanding Voltage 1000 Vrms Insulation Resistance Initial: 5000MΩ; after climatic test: 1000 MΩ Contact Resistance 45 mΩ maximum Dimensions are shown mm (inch) Dimensions subject to change 49 www.ittcannon.com Tempus CBC 20 2 mm Interconnect Male Right-Angle Signal Module - Wide Wall - Solder and Pressfit Termination - 4 Row Terminals Tinned Version S1 (Heat Staking) Version P1-002 Push-fit Peg Mounting PC Board Hole Pattern No. of Contacts 24 24 24 24 24 24 Part Number* CBC20A00-024BDP1-1-1-002-VR CBC20A00-024BDS1-1-1-002-VR CBC20A00-024BDS1-1-1-VR CBC20A00-024BDP1-5-1-002-VR CBC20A00-024BDS1-5-1-002-VR CBC20A00-024BDS1-5-1-VR Board Termination Retention Thickness 1,60 1,60 1,60 1,60 1,60 1,60 (.063) (.063) (.063 (.063) (.063) (.063) Pressfit Solder Solder Pressfit Solder Solder Pushfit Peg Pushfit Peg Heat Stake Pushfit Peg Pushfit Peg Heat Stake a 5,00 5,00 5,00 6,50 6,50 6,50 (.197) (.197) (.197) (.256) (.256) (.256) Contact Arrangement Row b c d 5,00 5,00 5,00 6,50 6,50 6,50 (.197) (.197) (.197) (.256) (.256) (.256) 5,00 5,00 5,00 6,50 6,50 6,50 (.197) (.197) (.197) (.256) (.256) (.256) 5,00 (.197) 5,00 (.197) 5,00 (.197) 6,50 (.256) 6,50 (.256) 6,50 (.256) * Part numbers in blue letters typeface indicate standard products: usually available with shorter lead times. Packaging Quantity All part numbers refer to connectors supplied in tubes. Note: Minimum order quantities apply Contact In Tube 24 44 Performance 1000 mating cycles min Dimensions are shown mm (inch) Dimensions subject to change 50 www.ittcannon.com Tempus CBC 20 2 mm Interconnect Male Right-Angle Power Module - Wide Wall - Solder and Pressfit Termination - 4 Row Features • Designed to conform with IEC61076-4-104, EIAis64, IEEE P896 Futurebus+, IEEE P1596 SCI and IEC 917 metric modular order • • Sequential mating provides live insertion capability • High performance contacts, high hertz stress, 1000 cycles minimum • Wide wall design for system tolerant 2,50 (.098) out-of-centre board insertion • High temperature materials, not affected by reflow solder process Stackable with other TEMPUS modules, with no loss of positions Technical Data Mechanical Data Contact Pitch Polarisation Coding Housing Material Termination solder Termination p.t.h. (solder) Termination Press Fit Termination p.t.h. (press fit) Board Guiding Left to Right Top to Bottom Board Slot Pitch Contact Material Hertz Stress Class 1 Plating Insertion Force Withdrawal Force 2,00 x 2,00 (.079 x .079) By design With coding key, see page 64 Liquid Crystal Polymer, UL94V-0 or PPS. UL94V-0 Solder tail, tin / lead plated ø 0,60 (.024), refer to page 73 Eye of the needle compliant section, tin/lead plated ø 0,70 (.028) refer to page 73 2,50 - 2,50 (.100 - .100) 1,50 - 1,50 (.060 - .060) 16,00 (.630) min. Solder Contact: brass, press fit contact: phosphor bronze 1200 MPa (174 klbf / sq. in.) 1000 cycles minimum Palladium Nickel plus Gold over Nickel 1,50 N (1.6 oz) max. per contact 0,30 N (0,5 oz) min. per contact Electrical Data Current Rating 4,00 A at 25°C, 3,00 A at 70°C Withstanding Voltage 1000 Vrms Insulation Resistance Initial: 5000MΩ, after climatic test: 1000 MΩ Contact Resistance 25 mΩ maximum Dimensions are shown mm (inch) Dimensions subject to change 51 www.ittcannon.com Tempus CBC 20 2 mm Interconnect Male Right-Angle Power Module - Wide Wall - Solder and Pressfit Termination - 4 Row Terminals Tinned Version S1 (Heat Staking) Version P1-002 Push-fit Peg Mounting PC Board Hole Pattern Refer to Design Notes on page 73 for circuit board drill and hole plating details. No. of Contacts 8 8 8 8 Part Number* Board Termination Retention Thickness CBC20J00-08BDP1-5-1-002-VR CBC20J00-08BDP1-103-1-002-VR CBC20J00-08BDP1-140-1-002-VR CBC20J00-08BDS1-5-1-002-VR 1,60 1,60 1,60 1,60 (.063) (.063) (.063) (.063) Pressfit Pressfit Pressfit Solder Pushfit Pushfit Pushfit Pushfit Peg Peg Peg Peg Contact Arrangement Row b c d a 6,50 8,00 8,00 6,50 (.256) (.315) (.315) (.256) 6,50 8,00 8,00 6,50 (.256) (.315) (.315) (.256) 6,50 8,00 6,50 6,50 (.256) (.315) (.256) (.256) 6,50 (.256) 8,00 (.315) 6,50 (.256) 6,50 (.256) Packaging Quantity All part numbers refer to connectors supplied in tubes. Note: Minimum order quantities apply Contact In Tube 8 44 Performance 1000 mating cycles min Dimensions are shown mm (inch) Dimensions subject to change 52 www.ittcannon.com Tempus CBC 20 2 mm Interconnect Male Right-Angle Power/Signal Combined - Wide Wall - Solder and Pressfit Termination 4 Row Features • • Designed to conform with IEC61076-4-104, EIAis64, IEEE P896 Futurebus+, IEEE P1596 SCI and IEC 917 metric modular order • Sequential mating provides live insertion capability • High performance contacts, high hertz stress, 1000 cycles minimum • Wide wall design for system tolerant 2,50 (.098) out-of-centre board insertion • High temperature materials, not affected by reflow solder process Stackable with other TEMPUS modules, with no loss of positions Technical Data Mechanical Data Contact Pitch Polarisation Coding Housing Material Termination Press-fit Termination p.t.h. (press fit) Board Guiding Left to Right Top to Bottom Board Slot Pitch Contact Material Hertz Stress Class 1 Plating Insertion Force (Power) Insertion Force (Signal) Withdrawal Force (Power) Withdrawal Force (Signal) 2,00 x 2,00 (.079 x .079) By design With coding key, see page 64 Liquid Crystal Polymer, UL94V-0 or PPS. UL94V-0 Eye of needle compliant section, tin/lead plated ø 0,70 (.028) refer to page 73 2,50 - 2,50 (.100 - .100) 1,50 - 1,50 (.060 - .060) 16,00 (.630) min. Solder Contact: brass, press fit contact: phosphor bronze 1200 MPa (174 klbf / sq. in.) 1000 cycles minimum Palladium Nickel plus Gold over Nickel 1,50 N (1.6 oz) max. per contact 0,45 N (1.6 oz) max. per contact 0,30 N (0.5 oz) min. per contact 0,15 N (1.0 oz) min. per contact Electrical Data Current Rating Power: 4,0 A at 25°C, 3,00 A at 70°C Withstanding Voltage 1000 Vrms Insulation Resistance Initial: 5000MΩ, after climatic test: 1000 MΩ Contact Resistance Signal: 1,5 A at 25°C, 1,0 A at 70°C 25 mΩ maximum Dimensions are shown mm (inch) Dimensions subject to change 53 www.ittcannon.com Tempus CBC 20 2 mm Interconnect Male Right-Angle Power/Signal Combined - Wide Wall - Solder and Pressfit Termination 4 Row 2,00 (.079) No. of Contacts 32 3,00 (0.118) 1,50 (0.059) 9,35 22,00 (.866) 1,40 (0.055) 13,6 (.535) 3,00 (0.118) 3,00 (0.118) 10,00 (0.157) 32,00 (1.260) (0.368) 5,0 (0.197) 23,98 max. (.944) 10,00 3,00 (0.394) (0.118) 12,0 (0.472) 2,05±0,05 (0.081±0.002) (0.028±0.002) 0,71±0,06 3,00 (0.118) 0,50 (0.02) Recommended P.C.B. Hole Pattern, Component Side 7,5 (.295) 6,00 (.236) 4,00 (.157) 6,00 (.236) Part Number CBC20Z15-032BDP1-15-1-002-VR Board Thickness Termination Retention 1,60 (.063) Pressfit Pushfit Peg Contact Arrangement Row a b c d Signal 5,00 (.197) 5,00 (.197) 5,00 (.197) 5,00 (.197) 6,50 (.256) 6,50 (.256) 6,50 (.256) 5,00 (.197) 5,00 (.197) 5,00 (.197) Power 6,50 (.256) 32 CBC120210-149 1,60 (.063) Pressfit Pushfit Peg Signal 5,00 (.197) Power column 8 all contacts = 8,00 (.315) Power column 11 all contacts = 6,50 (.256) Dimensions are shown mm (inch) Dimensions subject to change 54 www.ittcannon.com Tempus CBC 20 2 mm Interconnect Female Straight Power Module - Pressfit Termination - 4 Row Features • • Designed to conform with IEC 61076-4-104, EIAis64, IEEE P896 Futurebus+, IEEE P1596 SCI and IEC 917 metric modular order • Press fit with push fit retention, solder with heat stake or push fit • 45° tails for mechanical stability and electrical performance • High performance contacts, high hertz stress, 1000 cycles minimum • High temperature materials, not affected by reflow solder process Stackable with other TEMPUS modules, with no loss of positions Technical Data Mechanical Data Contact Pitch Polarisation Coding Housing Material Termination Press Fit Termination p.t.h. Contact Material Hertz Stress Class 1 Plating Insertion Force Withdrawal Force 2,00 x 2,00 (.079 x .079) By design With coding key, see page 64 Liquid Crystal Polymer, UL94V-0 or PPS, UL94V-0 Eye of the needle compliant section, tin/lead plated ø 0,70 (.028) refer to page 73 Phosphor Bronze 1200 MPa (174 klbf / sq. in.) 1000 cycles minimum Palladium Nickel plus Gold over Nickel 1,50 N (1.6 oz) max. per contact 0,30 N (0,5 oz) min. per contact Electrical Data Current Rating 4,00 A at 25°C, 3,00 A at 70°C Withstanding Voltage 1000 Vrms Insulation Resistance Initial: 5000MΩ, after climatic test: 1000 MΩ Contact Resistance 25 mΩ maximum Dimensions are shown mm (inch) Dimensions subject to change 55 www.ittcannon.com Tempus CBC 20 2 mm Interconnect 10,00 (.394) 2,00 (.079) 2,00 (.079) (.236) 2,00 (.079) 6,00 11,30 (.445) 11,85 (.467) 14,00 (.551) 6,00 (.236) 0,71±0,06 (.028±0.002) 14,30 (.563) 6,00 (.236) 1,50 (0.059) 2,00 (.079) 4,30 min. (.169) 0,35 (.014) 11,98 max. (0.472) Female Straight Power Module - Pressfit Termination - 4 Row 0,95 (.037) No. of Contacts Part Number Board Thickness 8 CBC20RP00-008FDP1-0-1 (VR) 1,60 (.063) Packaging Quantity Note: Minimum order quantities apply Contact In Tube 8 44 Performance 1000 mating cycles Dimensions are shown mm (inch) Dimensions subject to change 56 www.ittcannon.com Tempus CBC 20 2 mm Interconnect Shrouds Features • • Designed to conform with IEC61076-4-104, EIAis64, IEEE P896 Futurebus+, IEEE P1596 SCI and IEC 917 metric modular order To be used in conjunction with TEMPUS CBC 20 male pressfit long tail modules • Stackable with other TEMPUS modules, with no loss of positions • High temperature materials, not affected by reflow solder process • Wide wall design for system tolerant 2,50 (.100) out-of-centre board insertion • Polarisation by design • Two stand-off options • High I/O, 20 contacts per linear centimetre (51 contacts per linear inch) Technical Data Mechanical Data Contact Pitch Polarisation Coding Housing Material Board Retention Board Guiding Left to Right Top to Bottom Board Slot Pitch Styles 2,00 x 2,00 (.079 x .079) By design With coding key, see page 65 Liquid Crystal Polymer, UL94V-0 or PPS, UL94V-0 Press-fit on rear of backplane onto tails of TEMPUS male press-fit module 2,50 - 2,50 (.100 - .100) 1,50 - 1,50 (.060 - .060) 16,00 (.630) min. 3,40 (.130) base or 7,20 (.280) base with wire wrap Electrical Data (when assembled) Current Rating 1,50 A at 25°C, 1,00 A at 70°C Withstanding Voltage 1000 Vrms Insulation Resistance Initial: 5000MΩ, after climatic test: 1000 MΩ Contact Resistance 45 mΩ maximum Dimensions are shown mm (inch) Dimensions subject to change 57 www.ittcannon.com Tempus CBC 20 2 mm Interconnect Shrouds 3,40 mm Base Version 7,20 mm Base Version To select shroud/base required; see page 71 No. of Contacts 24 24 48 48 72 96 Packaging Quantity Part Number* CBC20A00-024WR1 CBC20A00-024WR3 CBC20B00-048WR1 CBC20B00-048WR3 CBC20X00-072WR1 CBC20C00-096WR1 Base Height 3,40 (.134) 7,20 (.283) 3,40 (.134) 7,20 (.283) 3,40 (.134) 3,40 (.134) Bulk package only Dimensions are shown mm (inch) Dimensions subject to change 58 www.ittcannon.com Tempus CBC 20 2 mm Interconnect Hybrid Modules Hybrid Module Male Male straight on backplane, 12,00 module, single DIN41626 cavity, wide wall. Hybrid Module Female Female 90° plug-in board, 12,00 module, single DIN41626 cavity. Heat stake or pushfit peg retention Description Part Number Retention Board Thickness ≥ 1,60 (.063) min. ≥ 1,60 (.063) ≥ 2,40 (.094) Dictated by insert used Female Right-angle CBC20X00-001FA3 Pushfit Peg Female Right-angle CBC20X00-001FA1 Heat Stake Female Right-angle CBC20X00-001FA2 Heat Stake Male Straight CBC20X00-001WA5 By Insert Packaging Quantity male: 330 per tray female: 286 per tray Note: Minimum order quantities apply Features • • Allows application of high power, coaxial insert, guiding features and fibre optics into an industry standard DIN41626 style cavity Designed to conform with IEC61076-4-104, EIAis64, IEEEP896 Futurebus+, IEEE P1596 SCI and IEC917 metric modular order • Stackable with other TEMPUS CBC20 modules, with no loss of positions • High temperature materials, not affected by reflow solder process • Wide wall male design for system tolerant 2,50 (.100) out of-centre board insertion • Female options of heat stake or pushfit peg retention • To be used with the following inserts to form a complete module - Coaxial - High Power - Guide Pin - Guide Pin with early ground - Fibre Optics (development) Technical Data Mechanical Data Polarisation Coding By design With coding key, see page 64 Housing Material Liquid Crystal Polymer, UL94V-0 Board Retention Pushfit peg or heat stake on female body Board Guiding Left to Right 2,50 - 2,50 (.100 - .100) Top to Bottom 1,50 - 1,50 (.060 - .060) Board Slot Pitch Electrical Data 16,00 (.630) min. Refer to relevant insert page Dimensions are shown mm (inch) Dimensions subject to change 59 www.ittcannon.com Tempus CBC 20 2 mm Interconnect Guide Pin / Socket Guiding with Ground / E.S.D. Guiding Only Features • Provides a minimum of 2,50 (1.00) out-of-centre misalignment in any direction with early grounding / electro-static discharge capability • Stackable with other TEMPUS modules, with no loss of positions • Utilises standard hybrid modules • Guide pin options of - gold plated pin with rear stud ground tag terminal (e.s.d. capability) - steel pin with screw to backplane to suit standard female cavity Technical Data Mechanical Data Contact Pitch Polarisation Coding Housing Material Board Retention Socket Termination Board Guiding Left to Right Top to Bottom ESD Pin Retention Steel Guide Pin Retention Single hybrid cavity in a 12 mm module By design With coding keys, see page 64 Liquid Crystal Polymer, UL94V-0 or PPS, UL94V-0 Pushfit peg or heat stake on body Solder to board 2,50 - 2,50 (.100 - .100) 2,50 - 2,50 (.100 - .100) Nut and Washer Screw and Washer Insert Mechanical Data Contact Material Guide Pin on Backplane Steel Socket on Plug-in Board Steel Plating Gold Performance 500 cycles minimum Dimensions are shown mm (inch) Dimensions subject to change 60 www.ittcannon.com Tempus CBC 20 2 mm Interconnect Guide Pin / Socket Inserts Technical Data Electrical Data Current Rating Insulation Resistance 40 A Initial: 5000MΩ, after climatic test: 1000MΩ Packaging Packaging Method 100 per bag Note: Minimum order quantities apply. Fig. 1 Grounded Socket CBC120210-701 Guide Pin with Ground Stud Complete with Nut and Washer CBC120210-705 Fig. 2 Female Hybrid Part of Monoblock Guide Pin with Screw CBC120210-706 Board Details Guide Pin CCBC120210-706 should only be used with female monoblocks Dimensions are shown mm (inch) Dimensions subject to change 61 www.ittcannon.com Tempus CBC 20 2 mm Interconnect Cable Connectors, 4 Row Features • • Designed to interface with IEC61076-4-104, EIAis64 style modules and shrouds Female contacts for interface to TEMPUS CBC20 male signal modules • • IDC termination with strain relief Wire size of 26 AWG and 30 AWG Technical Data Mechanical Data Contact Pitch 2,00 x 2,00 (.079 x .079) Basic Design Snap together terminal block two part for equal wire length, active “press to release” latch Housing Material Termination Wire Retention Body: thermoplastic polyester; Latch: polycarbonate Insulation displacement, IDC 26 AWG and 30 AWG Cable tie to body on cable, crimp behind IDC on wires Contact Specification Class 3 Plating Material 250 cycles minimum Gold Phosphor bronze Insertion Force 0,45 N (1.6 oz) max. per contact Withdrawal Force 0,15 N (0.5 oz) max. per contact Electrical Data Current Rating Withstanding Voltage Insulation Resistance 1A 1000 Vrms Initial: 5000 MΩ, after climatic test: 1000 MΩ Packaging Packaging Method One bag per assembly Dimensions are shown mm (inch) Dimensions subject to change 62 www.ittcannon.com Tempus CBC 20 2 mm Interconnect Cable Connectors, 4 Row No. of Contacts 24 24 48 48 Part Number CBC20C1-024F-W1-3 CBC20C1-024F-W2-3 CBC20C1-048F-W1-3 CBC20C1-048F-W2-3 Cable Size (AWG) 26 28/30 26 28/30 Note: Minimum order quantities apply Dimensions are shown mm (inch) Dimensions subject to change 63 www.ittcannon.com Tempus CBC 20 2 mm Interconnect Coding System Features • In accordance with IEC48b237 and EIAis64 specifications • Coding with no loss of contact position A simple key may be inserted into each 12,00 (.472) length of a module or monoblock providing many coding combinations with a minimum set of parts. Technical Data Mechanical Data Basic Design Material Coding keys as defined by IEC61076-4-104 and EIA is64, insert into both halves of connector, coding without loss of contact position Liquid Crystal Polymer or PPS, UL94V-0 Packaging Packaging Method As complete key set or separate keys in bags Separate keys are supplied 100 keys in a bag complete with holder Note: Minimum order quantites apply Part Number CBC120210-700 CBC120210-749 CBC120210-750 CBC120210-751 CBC120210-752 CBC120210-745 CBC120210-746 CBC120210-747 CBC120210-748 Description Coding Key set complete codes AF, BF, CF, DF, AM, BM, CM, DM Code Key AF Code Key BF Code Key CF Code Key DF Code Key AM Code Key BM Code Key CM Code Key DM Colour light blue light light pink light light light pink light green blue brown green blue brown Dimensions are shown mm (inch) Dimensions subject to change 64 www.ittcannon.com Tempus CBC 20 2 mm Interconnect Coding System Code keys used under code clips on female and into code slots on the male. Break key and holder from frame, insert into connector, than snap off holder. Dimensions are shown mm (inch) Dimensions subject to change 65 www.ittcannon.com Tempus CBC 20 2 mm Interconnect Custom Monoblocks Monoblocks are customer tailored Due to the unique manufacturing methconnectors produced from standard ods employed to produce TEMPUS, a module tool and moulded as a single wide range of monoblocks many be unit. produced in accordance with customer requirements. Please consult your Cannon sales representative or customer support locations. Features • Lowers application cost especially in volume applications • Directly replace modular layouts no board redesign required • Second sourced by modular layouts • Unique Cannon modular mould tools allow custom connectors from standardised tools • Fewer modules reduces inventory management • Body and Contact features same as modules • • Correctly configured in accordance with customer requirement, lowering chance of assembly errors and rework Can feature all parts of the standard modular system plus custom features (such as plastic guide pin etc.) • Many variations are available, consult Cannon Dimensions are shown mm (inch) Dimensions subject to change 66 www.ittcannon.com Tempus CBC 20 2 mm Interconnect Typical Futurebus + 12 SU (System Unit) Connector Layout As Used On Profile A: General Purpose Multiprocessor Systems Profile B: General Purpose I/O System Profile F: Very High Performance Multiprocessor Systems Profile T: Telecommunication Systems Features • • • Off-the-shelf Futurebus+ slot with live insertion, tails, signal and power correctly configured in accordance with IEEE P896 • Lowers applied cost • Can be customised to suit customers design variants • Correct configuration lowers chance of assembly errors and rework • Two parts replace seven modules on the circuit board and eight modules on the backplane (reference a 12SU slot) High performance contacts, high hertz stress, 1000 cycles minimum • • 45° female legform provides the shortest stub length and best impedance control, suitable for fast Backplane Transceiver Logic Caters for central or distributed arbitration (central arbitration use 1 x 232 position and 1 x 208 position, disributed use 2 x 208 position) Live insertion in accordance with IEEE P896 (rows A to D signal contacts are 6,50 long, row B power is 8,00 long with rows A, C and D 6,50 long, male) • Wide or narrow wall availability (male) • Heat stake or pushfit peg (female) Dimensions are shown mm (inch) Dimensions subject to change 67 www.ittcannon.com Tempus CBC 20 2 mm Interconnect Standard Monoblocks, Female CBC20Z01-208FDS1-0-1 CBC20Z01-208FDS2-0-1 CBC20Z01-208FDS1-0-1-002 CBC20Z01-208FDS2-0-1-002 CBC20Z02-232FDS1-0-1 CBC20Z02-232FDS2-0-1 CBC20Z02-232FDS1-0-1-002 CBC20Z02-232FDS2-0-1-002 CBC20Z03-104FDS1-0-1 CBC20Z03-104FDS2-0-1 CBC20Z03-104FDS1-0-1-002 CBC20Z03-104FDS2-0-1-002 CBC20Z14-032FDS1-0-1-002 CBC20Z14-032FDS2-0-1-002 CBC20Z04-104FDS1-0-1 CBC20Z04-104FDS2-0-1 CBC20Z04-104FDS1-0-1-002 CBC20Z04-104FDS2-0-1-002 CBC20Z06-200FDS1-0-1 CBC20Z06-200FDS2-0-1 CBC20Z06-200FDS1-0-1-002 CBC20Z06-200FDS2-0-1-002 CBC20Z07-200FDS1-0-1 CBC20Z07-200FDS2-0-1 CBC20Z07-200FDS1-0-1-002 CBC20Z07-200FDS2-0-1-002 CBC20Z13-208FDS1-0-1 CBC20Z13-208FDS2-0-1 CBC20Z13-208FDS1-0-1-002 CBC20Z13-208FDS2-0-1-002 Dimensions are shown mm (inch) Dimensions subject to change 68 www.ittcannon.com Tempus CBC 20 2 mm Interconnect Standard Monoblocks, Male CBC20Z01-208WDP1-17-1 CBC20Z01-208WDP1-57-1 CBC20Z01-208WDV1-16-1 CBC20Z02-232WDV2-16-1 CBC20Z02-208WDP1-15-1 CBC20Z02-232WDV2-15-1 CBC20Z03-104WDS1-17-1 CBC20Z03-104WDP1-57-1 CBC20Z04-104WDP1-17-1 CBC20Z04-104WDP1-17-1 CBC20Z14-032WDP1-15-1 Dimensions are shown mm (inch) Dimensions subject to change 69 www.ittcannon.com Tempus CBC 20 2 mm Interconnect Standard Monoblocks for Futurebus + Applications Future+ Module Designation Daughter Board Backplane (Side View) Backplane (Front View) Female Combined 90° Solder Pin 232 Contacts Pd/Ni-plating Class 1 Male Combined Straight Press-fit Wide Wall 232 Contacts Pd/NI-plating Class 1 CBC20Z02-232FDS1-0-1 Heatstake for 1,60 board CBC20Z02-232WDP1-57-1 All signal contacts 6,50, power contacts: row A, C, D: 6,50, row B: 8,00 CBC20Z02-232FDS2-0-1 Heatstake for 2,40 board CBC20Z02-232FDS1-0-1-002 Push-fit peg for 1,60 board CBC20Z02-232FDS2-0-1-002 Push-fit peg for 2,40 board Female Combined 90° Solder Pin 208 Contacts Pd/Ni-plating Class 1 Male Combined Straight Press-fit Wide Wall 208 Contacts Pd/Ni-plating Class 1 CBC20Z01-208FDS1-0-1 Heatstake for 1,60 board CBC20Z01-208WDP1-57-1 All signal contacts 6,50, power contact: row A, C, D: 6,50 row B: 8,00 CBC20Z01-208FDS2-0-1 Heatstake for 2,4 board CBC20Z01-208FDS1-0-1-002 Push-fit peg for 1,60 board CBC20Z01-208FDS2-0-1-002 Push-fit peg for 2,40 board PRESS-FIT TAIL LENGTH/POSITION AVAILABLE AS DICTATED BY CUSTOMER FOR REAR I/O Note: Custom styles available to order, see pages 68-69 Futurebus+ Note The monoblocks shown above are for a centralised arbitration system. If distributed arbitration is required simply use two of the 208 way monoblock and leave a 12,00 gap in the X position. Dimensions are shown mm (inch) Dimensions subject to change 70 www.ittcannon.com Tempus CBC 20 2 mm Interconnect Design Notes Shroud / Tail Calculation Shroud Base 7,20 mm Shroud Base 3,40 mm Tempus Tail Code Backplane Thickness mm (inch) 1,80 (.071) 1,90 (.075) 2,00 (.079) 2,10 (.083) 2,20 (.087) 2,30 (.091) 2,40 (.094) 2,50 (.098) 2,60 (.102) 2,70 (.106) 2,80 (.110) 2,90 (.114) 3,00 (.118) 3,10 (.122) 3,20 (.126) 3,30 (.130) 3,40 (.134) 3,50 (.138) 3,60 (.142) 3,70 (.146) 3,80 (.150) 3,90 (.154) 4,00 (.157) 4,10 (.161) 4,20 (.165) 4,30 (.169) 4,40 (.173) 4,50 (.177) 4,60 (.181) 4,70 (.185) 4,80 (.189) 4,90 (.193) 5,00 (.197) 5,10 (.201) 5,20 (.205) 5,60 (.220) 5,70 (.224) 5,80 (.228) 5,90 (.232) 6,00 (.236) 6,10 (.240) 6,20 (.244) 6,30 (.248) 6,40 (.252) 6,50 (.256) 6,60 (.260) U1 V2 Tail Length 13,60 Tail Length 17,00 Tempus Tail Code Backplane Thickness mm (inch) 1,80 (.071) 1,90 (.075) 2,00 (.079) 2,10 (.083) 2,20 (.087) 2,30 (.091) 2,40 (.094) 2,50 (.098) 2,60 (.102) 2,70 (.106) 2,80 (.110) 2,90 (.114) 3,00 (.118) 3,10 (.122) 3,20 (.126) 3,30 (.130) 3,40 (.134) 3,50 (.138) 3,60 (.142) 3,70 (.146) 3,80 (.150) 3,90 (.154) 4,00 (.157) 4,10 (.161) 4,20 (.165) 4,30 (.169) 4,40 (.173) 4,50 (.177) 4,60 (.181) 4,70 (.185) 4,80 (.189) 4,90 (.193) 5,00 (.197) 5,10 (.201) 5,20 (.205) 5,60 (.220) 5,70 (.224) 5,80 (.228) 5,90 (.232) 6,00 (.236) 6,10 (.240) 6,20 (.244) 6,30 (.248) 6,40 (.252) 6,50 (.256) 6,60 (.260) 8,00 (.316) 7,90 (.312) 7,80 (.308) 7,70 (.304) 7,60 (.300) 7,50 (.296) 7,40 (.292) 7,30 (.288) 7,20 (.284) 7,10 (.280) 7,00 (.276) 6,90 (.272) 6,80 (.268) 6,70 (.264) 6,60 (.260) 6,50 (.256) 6,40 (252) 6,30 (.248) 6,20 (.244) 6,10 (.240) 6,00 (.236) 5,90 (.232) 5,80 (.228) 5,70 (.224) 5,60 (.220) 5,50 (.216) 5,40 (.212) 5,30 (.208) 5,20 (.205) 5,10 (.201) 5,00 (.197) 8,00 7,90 7,80 7,70 7,60 7,50 7,40 7,30 7,20 7,10 7,00 (.316) (.312) (.308) (.304) (.300) (.296) (.292) (.288) (.284) (.280) (.276) contact length at rear of backplane U1 V2 Tail Length 13,60 Tail Length 17,00 not compatible 8,00 7,90 7,80 7,70 7,60 7,50 7,40 7,30 7,20 7,10 7,00 6,90 6,80 6,70 6,60 6,50 6,40 6,30 6,20 6,10 6,00 5,90 5,80 5,70 5,60 5,50 5,40 5,30 5,20 5,10 5,00 (.316) (.312) (.308) (.304) (.300) (.296) (.292) (.288) (.284) (.280) (.276) (.272) (.268) (.264) (.260) (.256) (.252) (.248) (.244) (.240) (.236) (.232) (.228) (.224) (.220) (.216) (.212) (.208) (.204) (.200) (.196) contact length at rear of backplane How to use this table: 1 find applicable backplane thickness 2 locate tail length of male module used 3 if resulting contact length (within assembled shroud) is indicated on chart (i.e. a number between 5,00 and 8,00 mm), then 4 refer to recommended shroud base at top of page. Example: a 3,70 mm backplane with a 13,60 mm tail on the pressfit male module assembled will give a 6,50 mm contact on the rear of the backplane when a 3,40 mm base shroud is used. Dimensions are shown mm (inch) Dimensions subject to change 71 www.ittcannon.com Tempus CBC 20 2 mm Interconnect Design Notes Summary of Tail Length Board Tail Length (from module Type Thickness Location Connector Part Gender Number base) 4,30 (.169) 13,60 (.535) Pressfit Pressfit >1,80 (.071) Backplane >1,80 (.071) Backplane male male P1 U1 17,00 (.669) Pressfit 2,90 (.114) 3,60 (.142) 4,60 (.181) Solder Solder Solder 3,00 (.118) Pressfit 2,90 (.114) 3,60 (.142) Solder 1,60 (.063) Daughter Card female S1 Solder 2,40 (.094) Daughter Card female S2 >1,80 (.071) Backplane male V2 1,60 (.063) 2,40 (.094) 3,20 (.126) male male male S5 S2 S1 female P1 Backplane Backplane Backplane >1,60 (.063) Daughter Card Summary of Retention Features Type Pushfit Peg Board Thickness >1,60 (.063) Heat Stake Heat Stake 1,60 (.063) 2,40 (.094) Location Daughter Card Daughter Card Daughter Card Part Number -002 (easy assembly version) S1 S2 Summary of Contact and Wipe Lengths Signal Contacts Power Contacts Contact Length 5,00 (.197) Wipe Length 1,75 (.069) 5,75 6,50 7,25 8,00 2,50 3,25 4,00 4,75 (.226) (.256) (.285) (.315) Contact Length 6,50 (.256) 7,25 (.285) 8,00 (.315) (.098) (.128) (.157) (.187) Wipe Length 3,25 (.128) 4,00 (.157) 4,75 (.187) For contact arrangements refer to relevant connector order reference. Dimensions are shown mm (inch) Dimensions subject to change 72 www.ittcannon.com Tempus CBC 20 2 mm Interconnect Design Notes Termination Pressfit Solder Plated Through Hole Diameter (A) 0,65 - 0,77 (.025 - .031) Drilled Hole Diameter (D) 0,78 - 0,83 (.031 - .033) Copper Plating (B) 25 - 50 µm (.001 - .002) 0,50 - 0,80 (.020 - .031) Tin Plating (C) 5 - 15 µm (.0002 - .0006) 0,68 - 0,73 (.027 - .029) Dimensions are shown mm (inch) Dimensions subject to change 73 www.ittcannon.com Tempus CBC 20 2 mm Interconnect Design Notes TEMPUS related specifications IEC EIA CECC 61076-4-104 Connector is64 Connector draft 75101-810 Connector IEEE 1301 Metric Equipment Practice IEEE IEC IEEE IEEE 1301.1 917 896 1596 Equipment Practice using 2,00 Connector Metric Modular Order Futerbus+ Scalable Coherent Interface IEC EIA International Electrotechnical Commission Electronic Industries Association IEEE CECC Institute of Electrical and Electronics Engineers CENELEC Electronic Components Committee CENELEC European Committee for Electrotechnikcal Standardization Dimensions are shown mm (inch) Dimensions subject to change 74 www.ittcannon.com Tempus CBC 20 2 mm Interconnect Application Tool Overiew The TEMPUS Connector System is fully supported by a full range of application tooling for prototype to mass-production volumes. Tool Description Purpose Page Backplane Press, Fixed Tool Type Press male modules into backplane 76 Insertion Tooling, Fixed Tool Type Press male modules into backplane 77 Press board mounted pushfit-peg modules onto plug-in circuit board Press board mounted pushfit-peg modules onto plug-in circuit board 80 83 Press shrouds onto rear of backplane Press shrouds onto rear of backplane 81 81 Remove and replace signal contact on the backplane Remove and replace power contact on the backplane 82 82 Terminate cable into i.d.c. cable connector terminals 83 Backplane Assembly Plug-in Circuit Board Assembly Pushfit Press (Small Press) Pushfit-peg Hand Tool Shroud Assembly Shroud Hand Tool Shroud Press Tool Backplane Repair Signal Contact Repair Tool Power Contact Repair Tool Cable Assembly Cable Assembly Tool Dimensions are shown mm (inch) Dimensions subject to change 75 www.ittcannon.com Tempus CBC 20 2 mm Interconnect Backplane Assembly Backplane Press (Fixed Tool Type) A pneumatically powered press for assembling male press-fit modules into a backplane/motherboard when used in conjunction with insertion tooling (Fixed Tool type) Features • Fine adjustment with measuring clock • Easy and fast tool change Technical Data Maximum Backplane Size Press Capacity Height Width Depth Weight Part Number CPP-60-250 CT 120 090-62 CT 120 090-61 Width 500,00 x 1200,00 (19,700 x 47,240) long 60 KN / 6 bar 900,00 (35.400) 1400,00 (55.100) 750,00 (29.500) 20 kg (551 lbs) Description Backplane Press, pneumatic assisted PCB Control - thickness meter, 110/220 VAC, with movable support PCB Control - pressure force meter, 110 / 220 VAC Dimensions are shown mm (inch) Dimensions subject to change 76 www.ittcannon.com Tempus CBC 20 2 mm Interconnect Backplane Assembly, 4 Row Press Block Holder Support Block Holder (for use with Backplane-Press Fixed Tool Type) Order reference CT121586-240 Insertion Tools (Fixed Tool Type) The Cannon basic press CPP-60-250 is used with the following tools to assemble: • • • Male Pressfit Connectors to the backplane Male Right-angle Connectors to the plug-in board Female Pressfit Connectors to the plug-in board These tools may also be used with available fixed tool type press with a suitable adaptor. Please consult Cannon for interface dimensions. Note: Press blocks, support blocks as well as spacer have to be ordered separately If a cross slot or a quick change head is available in the press bear, the Quick change part CT317-8661-053 can be used replacing part CT121586-297 CT317-8661-053 Dimensions are shown mm (inch) Dimensions subject to change 77 www.ittcannon.com Tempus CBC 20 2 mm Interconnect Press Bocks, Support Blocks Press Blocks, Fixed Tool Type For use with Press block Holder CT121586-239 and Press head CT121586-297 alternatively Quick change part CT317-8661-053 can be used • For assembly of male four and five row power and signal modules Part Number CT121586-241 CT121586-242 CT121586-243 Press Blocks 24 Signal Contacts 48 Signal Contacts 96 Signal Contacts CT121586-244 8 Power Contacts CT121586-247 Spacer (24/30 way) CT121586-248 CT121586-249 Spacer (48/69 way) Spacer (96/120 way) CT121586-5006 CT121586-5007 CT121586-5008 CT121586-5009 30 Signal Contacts 60 Signal Contacts 120 Signal Contacts 10 Power Contacts Support Blocks, Fixed Tool Type For use with Support Block Holder CT121586-240 • For assembly of male four and five row power and signal, pushfit female and right-angle male modules Part Number CT121586-250 CT121586-251 Support Blocks 24/30 Signal Contacts 48/60 Signal Contacts CT121586-252 CT121586-253 CT121586-254 CT121586-255 96/120 Signal Contacts Spacer (24/30 way) Spacer (48/60 way) Spacer (96/120 way) Dimensions are shown mm (inch) Dimensions subject to change 78 www.ittcannon.com Tempus CBC 20 2 mm Interconnect Male Right-Angle Connector, Female Connectors Female Connectors with pushfit retention and pressfit tails to the plug-in board. Male Right-Angle Connectors with pushfit retention and pressfit tails to the plug-in board. The Cannon Basic Press CPP-60-250 is used with the following tools to assemble: - Male Right-Angle Pressfit Modules - Female Right-Angle Pressfit Modules Part Number Connector CT121586-302 CT121586-303 CT121586-304 Female pushfit retention pressfit tail Part Number Connector CT121586-5019 CT121586-5020 CT121586-5021 Male pushfit retention pressfit tail Pushfit Block 24/30 board support 48/60 board support 96/120 board support Pushfit Block 24 board support 48 board support 96 board support Note: Fixing head and press-head, stamp as well as support block and support block holder have to be orderd separately Support block holder with support blocks and Quick change part CT317-8661-053. See page 77 Dimensions are shown mm (inch) Dimensions subject to change 79 www.ittcannon.com Tempus CBC 20 2 mm Interconnect Pushfit Press-in Tool A hand operated tool for assembling TEMPUS male and female modules with pushfit peg. Order Reference for Support and Press Head Male Right-Angled CHP-CBC20-Pushfit-M Order Reference for Support and Press Jead Female CHP-CBC20-Pushfit-F Order Reference Basic Press CHP-420 Features • Fix up to 12 modules in a single operation • Quick change adaptor kits for plugin board mounted male and female modules • • Consult Cannon for non-standard or special board size applications Min/max board dimensions Dimensions are shown mm (inch) Dimensions subject to change 80 www.ittcannon.com Tempus CBC 20 2 mm Interconnect Shroud Assembly Shroud Press Tool Shroud Hand Tool CT121586-239 CT121586-295 CT121586-296 CT121586-305 Features • Low or high volume tools • Simple fast assembly of TEMPUS shrouds to backplane • Press tool head rotates to suit board layout Part Number CT121586-295 CT121586-296 Shrouds may be pressfit assembled into male tails on the rear of the backplane using either simple hand tools or press assisted tools. Description Shroud Hand Tool, 1 Module Shroud Hand Tool, 2 Modules Shroud Press Tool, to assemble up to 5x12 mm shroud, for use with CPP-60-250: Part Number Description CT121586-297 CT121586-298 CT121586-305 Press head with 90° rotation Press stamp Support base If a cross slot or a quick change head is available in the press bear, the Quick change part CT317-8661-053 can be used replacing part CT121586-297 CT317-8661-053 Dimensions are shown mm (inch) Dimensions subject to change 81 www.ittcannon.com Tempus CBC 20 2 mm Interconnect Backplane Repair Insertion/Extraction Tool for Signal Contacts Insertion/Extraction Tool for Power Contacts Features • Part Number CIET-CBC20 • A hand tool to remove and replace single signal contacts into male modules when assembled into a backplane. A hand tool to remove and replace single power blade contacts into male modules when assembled into a backplane. Part Number Description CIET-CBC20HV Power Contact Repair Tool Description Signal Contact Repair Tool Dimensions are shown mm (inch) Dimensions subject to change 82 www.ittcannon.com Tempus CBC 20 2 mm Interconnect Cable Connector Assembly TEMPUS IDC Termination Tool For IDC termination and crimp retention of cable into the TEMPUS 24 position and 48 position cable connectors. • Part Number CT121586-5010 Description TEMPUS Cable Connector IDC Tool TEMPUS Pushfit-peg Hand Tool • For hand assembly of to six female modules with pushfit-peg onto a plug-in circuit board. Part Number 995-2000-064 Description Pushfit-peg Hand Tool CTHT-200 Developments ...at the development or prototype stage now Cannon has a policy of expanding the TEMPUS system in accordance with customer wishes in addition to specification. • Fibre optic systems Due to the flexible manufacturing methods employed many of these developments can be incorporated into monoblocks. • High speed transmission up to 2, 4 Gigabit / second • Reverse system Dimensions are shown mm (inch) Dimensions subject to change 83 www.ittcannon.com Product Safety Information THIS NOTE MUST BE READ IN CONJUNCTION WITH THE PRODUCT DATA SHEET/CATALOG. FAILURE TO OBSERVE THE ADVICE IN THIS INFORMATION SHEET AND THE OPERATING CONDITIONS SPECIFIED IN THE PRODUCT DATA SHEET/ CATALOG COULD RESULT IN HAZARDOUS SITUATIONS. 1. MATERIAL CONTENT AND PHYSICAL FORM Electrical connectors do not usually contain hazardous materials. They contain conducting and non-conducting materials and can be divided into two groups. a) Printed circuit types and low cost audio types which employ all plastic insulators and casings. b) Rugged, Fire Barrier and High Reliability types with metal casings and either natural rubber, synthetic rubber, plastic or glass insulating materials. Contact materials vary with type of connector and also application and are usually manufactured from either: Copper, copper alloys, nickel, alumel, chromel or steel. In special applications, other alloys may be specified. 2. FIRE CHARACTERISTICS AND ELECTRIC SHOCK HAZARD There is no fire hazard when the connector is correctly wired and used within the specified parameters. Incorrect wiring or assembly of the connector or careless use of metal tools or conductive fluids, or transit damage to any of the component parts may cause electric shock or burns. Live circuits must not be broken by separating mated connectors as this may cause arcing, ionization and burning. Heat dissipation is greater at maximum resistance in a circuit. Hot spots may occur when resistance is raised locally by damage, e.g. cracked or deformed contacts, broken strands of wire. Local overheating may also result from the use of the incorrect application tools or from poor quality soldering or slack screw terminals. Overheating may occur if the ratings in the product Data Sheet/Catalog are exceeded and can cause breakdown of insulation and hence electric shock. If heating is allowed to continue it intensifies by further increasing the local resistance through loss of temper of spring contacts, formation of oxide film on contacts and wires and leakage currents through carbonization of insulation and tracking paths. Fire can then result in the presence of combustible materials and this may release noxious fumes. Overheating may not be visually apparent. Burns may result from touching overheated components. 3. HANDLING Care must be taken to avoid damage to any component parts of electrical connectors during installation and use. Although there are normally no sharp edges, care must be taken when handling certain components to avoid injury to fingers. Electrical connectors may be damaged in transit to the customers, and damage may result in creation of hazards. Products should therefore be examined prior to installation/use and rejected if found to be damaged. 4. DISPOSAL Incineration of certain materials may release noxious or even toxic fumes. 5. APPLICATION Connectors with exposed contacts should not be selected for use on the current supply side of an electrical circuit, because an electric shock could result from touching exposed contacts on an unmated connector. Voltages in excess of 30 V ac or 42.5 V dc are potentially hazardous and care should be taken to ensure that such voltages cannot be transmitted in any way to exposed metal parts of the connector body. The connector and wiring should be checked, before making live, to have no damage to metal parts or insulators, no solder blobs, loose strands, conducting lubricants, swarf, or any other undesired conducting particles. Circuit resistance and continuity check should be made to make certain that there are no high resistance joints or spurious conducting paths. Always use the correct application tools as specified in the Data Sheet/Catalog. Do not permit untrained personnel to wire, assemble or tamper with connectors. For operation voltage please see appropriate national regulations. IMPORTANT GENERAL INFORMATION (i) Air and creepage paths/Operating voltage. The admissible operating voltages depend on the individual applications and the valid national and other applicable safety regulations. For this reason the air and creepage path data are only reference values. Observe reduction of air and creepage paths due to PC board and/or harnessing. (iii) Other important information Cannon continuously endeavors to improve their products. Therefore, Cannon products may deviate from the description, technical data and shape as shown in this catalog and data sheets. “Engineered for life” is a registered trademark of ITT Industries, ©2003. All other trademarks or registered trademarks are property of their respective owners. All data subject to change without notice. Product Warranty ITT Cannon, a Division of ITT Industries, Inc. manufactures the highest quality products available in the marketplace; however these products are intended to be used in accordance with the specifications in this publication. Any use or application that deviates from the stated operating specifications is not recommended and may be unsafe. No information and data contained in this publication shall be construed to create any liability on the part of Cannon. Any new issue of this publication shall automatically invalidate and supersede any and all previous issues. A limited warranty applies to Cannon products. Except for obligations assumed by Cannon under this warranty, Cannon shall not be liable for any loss, damage, cost of repairs, incidental or consequential damages of any kind, whether or not based on express or implied warranty, contract, negligence or strict liability arising in connection with the design, manufacture, sale, use or repair of the products. Product availability, prices and delivery dates are exclusively subject to our respective order confirmation form; the same applies to orders based on development samples delivered. This publication is not to be construed as an offer. It is intended merely as an invitation to make an offer. By this publication, Cannon does not assume responsibility or any liability for any patent infringements or other rights of third parties which may result from its use. Reprinting this publication is generally permitted, indicating the source. However, Cannon's prior consent must be obtained in all cases. (ii) Temperature All information given are temperature limits. The operation temperature depends on the individual application. Dimensions are shown mm (inch) Dimensions subject to change 84 www.ittcannon.com