ca_D1-D102:Layout 1 2/10/11 11:51 AM Page 1 ca_D1-D102:Layout 1 2/10/11 11:51 AM Page 51 Micro Center Jackscrew MJS The MJS jackscrew series provides a reliable interconnect for board-to-board, board-to-cable and in-line cable-to-cable applications. Layouts accommodating up to 76 MICROPIN/MICROSOCKETTM contacts are available, with the same wide range of options as are offered with the other MICRO Line products offered in this catalog. How to Order MJS R * - 26 P H 001 RoHS COMPLIANCE SERIES INSULATOR MATERIAL CONTACT ARRANGEMENT CONTACT TYPE TERMINATION TYPE TERMINATION CODES SERIES CONTACT TYPE MJS - Micro Center Jackscrew TERMINATION CODE* P - Pin S - Socket INSULATOR MATERIAL B - Diallyl phthalate V - Polyester U - Polyetherimide R - Polyphenylene sulfide CONTACT ARRANGEMENTS Unshrounded Receptacle: 10, 26, 51, 66 Shrouded Receptacle; 10, 26, 34, 38, 42, 76 Low Profile Plug and Receptacle (shrouded): 28 (H) 001 TERMINATION TYPE H - Insulated wire harness. I - Integral tail (MJSV-28S only). L - Solid - uninsulated wire. S - Solder pot to accept #26 AWG harness wire. T - Thru bundle pigtail (MJSV-28P only). - 18" , 7/34 strand, #26 AWG, MIL-W-16878/4, Type E Teflon, yellow. - 18", 7/34 strand, #26 AWG, MIL-W-16878/4, Type E Teflon, color coded to MIL-STD-681 System I. - 1/2" uninsulated solid #25 AWG gold plated copper. - 1" uninsulated solid #25 AWG gold plated copper. (H) 003 (L) 1 (L) 2 * See Termination Codes shown below. Standard Wire Termination Codes The following termination codes are listed for your information. For additional codes please refer to Appendix on pages D-98 to D-102. All wire lengths are minimum. Solid Uninsulated Type (L) Ha rness Type (H) #26AWG per MIL-W-16878/4 Type E Teflon, 7/34 stranded. All Yellow H 020 H 019 H 026 H 029 H 028 H 001 H 038 Color Coded H 027 H 016 H 034 H 025 H 002 H 003 H 023 #25AWG gold plated solid copper. Length 24 (609.6) 30 (762.0) 36 (914.4) 48 (1219.2) 72 (1828.8) 120 (3048.0) All Yellow H 009 H 010 H 011 H 013 H 017 H 042 Color Coded H 004 H 005 H 006 H 048 H 046 H 041 Termination Code L61 L56 L57 L39 L58 L1 Length Termination Code .125 (3.18) .150 (3.81) .190 (4.83) .250 (6.35) .375 (9.53) .500 (12.70) L14 L2 L7 L6 L16 L10 Microminiature Length 3 (76.2) 6 (152.4) 8 (203.2) 10 (254.0) 12 (304.8) 18 (457.2) 20 (508.0) D Length .750 (19.05) 1.000 (25.40) 1.500 (38.10) 2.000 (50.80) 2.500 (63.50) 3.000 (76.20) Contact Arrangements Face view of pin-use reverse order for socket 4 6 10 12 14 26 1 5 7 10 Contacts 21 44 66 51 Contacts 6 10 16 1 23 45 12 22 34 66 Contacts 34 Contacts MJSV (shrouded) Identification numbers are for reference only and do not appear on connectors. Dimensions shown in inches (mm) Specifications and dimensions subject to change D-51 *Low profile configuration **MJSV & MJSR 10 18 28 28 Contacts** 1 13 23 MJSB/MJSU (unshrouded) www.ittcannon.com 1 11 19 16 Contacts** 26 Contacts 1 18 35 17 34 51 1 7 11 1 13 15