ca_D1-D102:Layout 1 2/10/11 11:51 AM Page 1 ca_D1-D102:Layout 1 2/10/11 11:51 AM Page 18 Micro-D PCB - .050" Contact Spacing MDM-PCB MDM-PCB connectors are designed for use with flex circuitry, flat cable and printed circuit boards or multi-layer boards. They use the standard MDM metal shell and provide high density and high reliability in board-to-board, board-to-cable and cable-to-cable applications. MDM-PCB connectors are available in 8 shell sizes with 9 to 100 contacts. Terminations may be straight (BS) or at 90˚ right angle (BR, CBR) board thickness. Jackpost mounting for use with locking hardware is also available. How to Order - MDM-PCB Series R MDM * - 25 P BS P - T L39 A174 RoHS COMPLIANCE SERIES INSULATOR MATERIAL CONTACT ARRANGEMENT CONTACT TYPE TERMINATION TYPE MOUNTING HARDWARE (Shell Flange) MOUNTING HARDWARE FOR PCB TERMINATION TAIL LENGTH MODIFICATION CODE SHELL FINISH MODIFICATION CODES SERIES MDM - Micro "D" Metal Shell INSULATOR MATERIAL Liquid Crystal Polymer (LCP) Microminiature D CONTACT ARRANGEMENT 9, 15, 21, 25, 31, 37, 51, and 100 CONTACT TYPE P - Pin (Plug) S - Socket (Receptacle) NOTE: Back molding material – Epoxy Hysol #MG40FS TERMINATION TYPE BS - Straight PCB Termination BR - Right Angle PCB Termination CBR - Right Angle Narrow Profile PCB Terminations MOUNTING HARDWARE (Shell Flange) P - Jackposts M7 - Jackposts M83513/5-07 (Sizes 9-51) M17 - Jackposts M83513/5-17 (Size 100) No letter - none MOUNTING HARDWARE FOR PCB T - Threaded Insert #2-56 Thd for Shell Sizes 9 thru 51 #4-40 Thd for Shell Size 100 No letter - none TERMINATION TAIL LENGTH MODIFICATION CODE None - .109 (2.77) ±.015 (0.38) Standard L61 - .125 (3.18) L56 - .150 (3.81) L57 - .190 (4.83) L39 - .250 (6.35) L58 - .375 (9.52) SHELL FINISH MODIFICATION CODES None - Yellow Chromate/Cadmium over Nickel A174 - Electroless Nickel A172 - Gold over Nickel A141 - Irridite/Alodine A30 - Black Anodize (For special modification codes, consult customer service.) Dimensions shown in inches (mm) Specifications and dimensions subject to change D-18 www.ittcannon.com ca_D1-D102:Layout 1 2/10/11 11:51 AM Page 19 Micro-D PCB - .050" Contact Spacing MDM-PCB BS (Board Straight) Series A B D C .186 (4.72) MAX. PLUG .198 (5.03) MAX. RECEPTACLE F E G J CAV. #1 .096 ± .005 (2.44 ± 0.13) DIA. Size 9-51) K H LAST CAV. JACKPOST (9-51) #2-56 UNC-2B TYP. .109 ± 0.15 (2.77 ± 0.38) JACKPOST (100) #4-40 UNC-2B TYP. .120 ± .005 (3.05 ± 0.13) Size 100 LAST CAV. * .100 (2.54) REF. CAV. #1 PCB Termination Arrangements* (Viewed from PCB solder side) Identification number shown for plug connector, use reverse order for socket connector. .050 (1.27) 6 1 7 2 8 3 .050 (1.27) 9 4 5 1 2 3 4 5 6 7 .050 (1.27) .050 (1.27) 9 10 11 12 13 14 15 .375 (9.53) NOTE: Dimensions shown are for reference only-consult factory for final design dimensions. 12 13 8 1 2 14 15 16 17 18 19 20 21 3 5 6 7 8 9 10 11 15 Contacts 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 1 2 3 4 5 6 7 8 9 10 20 21 22 23 24 25 26 27 28 29 30 31 11 12 13 14 15 16 1 .150 (3.81) 2 3 4 5 6 7 8 9 10 77 27 1 78 53 28 2 79 54 29 3 4 5 6 7 8 9 10 11 12 13 25 Contacts .050 (1.27) 32 33 34 35 36 37 .100 (2.54) TYP. 36 37 38 39 40 41 42 43 44 45 46 47 48 19 11 12 13 14 15 16 17 18 19 1 49 50 51 35 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 51 Contacts 37 Contacts 52 3 .150 (3.81) 31 Contacts 76 2 21 Contacts .050 (1.27) .150 (3.81) 1 .150 (3.81) .225 (5.72) .225 (5.72) TYP. 9 Contacts 4 14 15 16 17 18 19 20 21 22 23 24 25 80 55 30 4 81 56 31 5 82 57 32 6 83 58 33 7 84 59 34 8 85 60 35 9 86 36 10 87 61 62 37 11 88 89 63 38 12 64 39 13 90 65 40 14 91 66 41 15 92 67 42 16 93 94 68 43 17 69 44 18 95 70 45 19 96 71 46 20 21 97 72 47 98 73 48 22 49 23 D 100 75 50 24 51 25 26 .150 (3.81) 100 Contacts NOTE: Standard lead termination is #24 AWG, solid copper, solder or tin dipped All Termination Configurations .100 (2.54) x .100 (2.54) Grid Pattern, Offset .050 (1.27) B C ±.007 (.18) B . ±.005 (.13) . .785 (19.94) .565 (14.35) 1.150 (29.21) 1.390 (35.31) B . .334 (8.48) . .185 (4.70) . .308 (7.82) . .165 (4.19) . .355 (9.02) . .555 (14.10) 1.390 (35.31) 1.150 (29.21) .565 (14.35) .785 (19.94) .402 (10.21) .253 (6.43) .308 (7.82) .165 (4.19) .355 (9.02) .555 (14.10) 15 B 1.390 (35.31) 1.150 (29.21) .715 (18.16) .935 (23.75) .484 (12.29) .185 (4.70) .308 (7.82) .165 (4.19) .355 (9.02) .555 (14.10) 15 B 1.390 (35.31) 1.150 (29.21) .715 (18.16) .935 (23.75) .552 (13.97) .253 (6.43) .308 (7.82) .165 (4.19) .355 (9.02) .555 (14.10) 1 B 1.690 (43.93) 1.450 (36.83) .865 (21.97) 1.085 (27.56) .634 (16.10) .185 (4.70) .308 (7.82) .165 (4.19) .355 (9.02) .555 (14.10) 1 B 1.690 (43.93) 1.450 (36.83) .865 (21.97) 1.085 (27.56) .702 (17.83) .253 (6.43) .308 (7.82) .165 (4.19) .355 (9.02) .555 (14.10) 5 B 1.740 (44.20) 1.500 (38.10) .965 (24.51) 1.185 (30.10) .734 (18.64) .185 (4.70) .308 (7.82) .165 (4.19) .355 (9.02) .555 (14.10) 5 B 1.740 (44.20) 1.500 (38.10) .965 (24.51) 1.185 (30.10) .802 (20.37) .253 (6.43) .308 (7.82) .165 (4.19) .355 (9.02) .555 (14.10) 31 B 2.040 (51.82) 1.800 (45.72) 1.115 (28.32) 1.335 (33.91) .884 (22.45) .185 (4.70) .308 (7.82) .165 (4.19) .355 (9.02) .555 (14.10) 31 B 2.040 (51.82) 1.800 (45.72) 1.115 (28.32) 1.335 (33.91) .952 (24.18) .253 (6.43) .308 (7.82) .165 (4.19) .355 (9.02) .555 (14.10) 37 B 2.340 (59.44) 2.100 (53.34) 1.265 (32.13) 1.485 (37.72) 1.034 (26.26) .185 (4.70) .308 (7.82) .165 (4.19) .355 (9.02) .555 (14.10) 37 B 2.340 (59.44) 2.100 (53.34) 1.265 (32.13) 1.485 (37.72) 1.102 (27.99) .253 (6.43) .308 (7.82) .165 (4.19) .355 (9.02) .555 (14.10) 51 B 2.270 (51.66) 2.000 (50.80) 1.215 (30.86) 1.435 (36.45) .984 (24.99) .228 (5.79) .351 (8.92) .165 (4.19) .355 (9.02) .555 (14.10) 51 B 2.270 (51.66) 2.000 (50.80) 1.215 (30.86) 1.435 (36.45) 1.052 (26.72) .296 (7.52) .351 (8.92) .165 (4.19) .355 (9.02) .555 (14.10) 100 B 3.070 (77.98) 2.800 (71.12) 1.800 (45.72) 2.175 (55.24) 1.384 (35.15) .271 (6.88) .460 (11.68) .303 (7.70) .550 (12.70) .686 (17.42) 1.800 (45.72) 2.800 (71.12) 3.070 (77.98) 100 B *For jackpost, add letter "P" or "M7" for sizes 9-51, "M17" for size 100. 2.175 (55.24) 1.508 (38.30) .394 (10.01) .460 (11.68) .303 (7.70) .550 (12.70) .686 (17.75) B Dimensions shown in inches (mm) Specifications and dimensions subject to change www.ittcannon.com D-19 Microminiature .150 (3.81) 99 74 ca_D1-D102:Layout 1 2/10/11 11:51 AM Page 20 Micro-D PCB - .050" Contact Spacing MDM-PCB BR (Board Right Angle) Series C .109 ± .015 (2.77 ± 0.38) E CAV. #1 JACKPOST #2-56 UNC-2B TYP. .186 (4.72) MAX. PLUG .198 (5.05) MAX. A G B .125 ± .015 (3.18 ± 0.38) D .100 (2.54) TYP. F LAST CAV. .050 (1.27) TYP. .096 ± .005 (2.44 ± 0.31) .150 ± .010 (3.8 ± 0.25) .100 TYP. PCB Termination Arrangements (Viewed from bottom of connector, PCB solder side.) Identification number shown for plug connector, use reverse order for socket connector. .150 (3.81) 6 1 7 2 8 3 .375 (9.53) 9 4 9 10 11 12 13 14 15 5 1 2 3 4 5 6 7 12 13 .300 (7.62) 8 .150 (3.81) .150 (3.81) .150 (3.81) 1 2 14 15 16 17 18 19 20 21 22 23 24 25 14 15 16 17 18 19 20 21 3 4 5 6 7 8 1 9 10 11 15 Contacts 9 Contacts 4 5 5 6 7 8 9 10 11 12 13 20 21 22 23 24 25 26 27 28 29 30 31 6 7 8 9 10 11 12 13 14 15 16 1 2 3 4 5 6 7 8 9 10 .050 (1.27) 36 32 33 34 35 36 37 1 11 12 13 14 15 16 17 18 19 .150 (3.81) 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 20 21 22 23 24 25 26 27 28 29 30 31 32 33 2 3 4 5 6 7 8 9 10 34 35 11 12 13 14 15 16 17 18 .150 (3.81) .150 (3.81) 51 Contacts 37 Contacts 31 Contacts .175 (4.45) 25 Contacts 19 3 4 .150 (3.81) 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 2 3 21 Contacts .150 (3.81) 1 2 .225 (5.72) .050 (1.27) 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 27 28 29 30 31 32 33 1 D 2 3 4 5 6 7 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 .150 (3.81) Microminiature 100 Contacts NOTE: Standard lead termination is #24 AWG, gold plated, solid copper, solder or tin dripped. Part Number By Shell Size MDM-9PBR* MDM-9SBR* MDM-15PBR* MDM-15SBR* MDM-21PBR* MDM-21SBR* MDM-25PBR* MDM-25SBR* MDM-31PBR* MDM-31SBR* MDM-37PBR* MDM-37SBR* MDM-51PBR* MDM-51SBR* MDM-100PBR* MDM-100SBR* A Max. 1.390 (35.31) 1.390 (35.31) 1.540 (39.12) 1.540 (39.12) 1.690 (42.93) 1.690 (42.93) 1.790 (45.47) 1.790 (45.47) 2.040 (51.82) 2.040 (51.52) 2.340 (59.44) 2.340 (59.44) 1.875 (47.63) 1.875 (47.63) 2.74 (69.72) 2.74 (69.72) B ± .007 (.18) 1.150 (29.21) 1.150 (29.21) 1.300 (33.02) 1.300 (33.02) 1.450 (36.83) 1.450 (36.83) 1.550 (39.37) 1.550 (39.37) 1.800 (45.72) 1.800 (45.72) 2.100 (53.34) 2.100 (53.34) 1.600 (40.64) 1.600 (40.64) 2.500 (63.50) 2.500 (63.50) All Termination Configurations .100 (2.54) x .100 (2.54) Grid Pattern, Offset .050 (1.27). C ± .005 (.13) .565 (14.35) .565 (14.35) .715 (18.16) .715 (18.16) .865 (21.97) .865 (21.97) .965 (24.51) .965 (24.51) 1.115 (28.32) 1.115 (28.32) 1.265 (32.13) 1.265 (32.13) 1.215 (30.86) 1.215 (30.86) 1.800 (45.72) 1.800 (45.72) D Max. .334 (8.48) .402 (10.21) .484 (12.29) .552 (13.97) .634 (16.10) .702 (17.83) .734 (18.64) .802 (20.37) .884 (22.45) .952 (24.18) 1.034 (26.26) 1.102 (27.99) .984 (24.99) 1.052 (26.72) 1.384 (35.15) 1.508 (38.10) E Max. .185 (4.70) .253 (6.43) .185 (4.70) .253 (6.43) .185 (4.70) .253 (6.43) .185 (4.70) .253 (6.43) .185 (4.70) .253 (6.43) .185 (4.70) .253 (6.43) .228 (5.79) .296 (7.52) .271 (6.88) .394 (10.01) F Max. .455 (11.56) .455 (11.56) .455 (11.56) .455 (11.56) .455 (11.56) .455 (11.56) .455 (11.56) .455 (11.56) .455 (11.56) .455 (11.56) .455 (11.56) .455 (11.56) .565 (14.35) .565 (14.35) .755 (19.18) .755 (19.18) G Max. .308 (7.82) .308 (7.82) .308 (7.82) .308 (7.82) .308 (7.82) .308 (7.82) .308 (7.82) .308 (7.82) .308 (7.82) .308 (7.82) .308 (7.82) .308 (7.82) .351 (8.92) .351 (8.92) .394 (10.01) .394 (10.01) *For jackpost, add letter "P" or "M7" for sizes 9-51, "M17" for size 100. Dimensions shown in inches (mm) Specifications and dimensions subject to change D-20 www.ittcannon.com ca_D1-D102:Layout 1 2/10/11 11:51 AM Page 21 Micro-D PCB - .050" Contact Spacing MDM-PCB CBR (Condensed Board Right Angle) Series LAST CAV. JACKPOST 2-56 UNC-2B TYP. (Size 9-51) A C .109 ± .015 (2.77 ± 0.38) + D + .186 (4.72) MAX.PLUG .198 (5.03) MAX. RECEPT. CAV. #1 B .185 (4.70)MAX. H G F E JACKPOST #4-40 UNC 2B TYP. C H H G G F .096 ± .005 (2.44 ± 0.31) DIA.TYP. (Size 9-51) SEE VIEW X SEE VIEW Y F .125 ± .005 (3.18 ± 0.31) DIA. TYP. ** * * FOR 31: 1.085(27.56) MAX. FOR 37: 1.185(30.10) MAX. FOR 51: 1.225(31.12) MAX. 1.815 (46.10) MAX. SEE VIEW W 100 VIEW PCB Termination Arrangements (Viewed from bottom of connector, PCB solder side.) Identification number shown for plug connector, use reverse order for socket connector. .108 (2.73) .083 (2.11) 5 4 9 2 8 .100 (2.54) TYP. 7 3 .020 (0.51) 1 7 8 15 5 6 14 4 12 13 3 11 1 10 10 15 Contacts View X 21 20 .083 (2.11) 6 8 7 9 11 9 6 9 Contacts View X .083 (2.11) .020 (0.51) 2 19 5 .050 (1.27) TYP. 4 17 18 3 16 1 14 15 .020 (0.51) 13 10 11 12 2 13 24 25 12 5 7 21 20 23 19 .183 (4.65) .158 (4.00) 16 13 14 30 .020 (0.51) 12 29 31 11 28 27 9 10 8 24 25 26 6 7 23 4 5 21 22 2 3 19 20 19 1 18 17 37 18 .020 (0.51) 36 17 16 35 34 15 13 14 33 32 12 31 30 11 10 29 7 9 5 8 28 6 26 27 25 3 4 .020 (0.51) 25 Contacts View X 21 Contacts View X 24 22 23 15 17 1 18 2 35 20 16 34 21 51 50 13 14 33 32 49 27 11 12 31 30 48 28 43 45 47 8 6 7 9 10 29 46 26 42 44 40 4 5 25 41 39 2 3 24 25 1 23 22 38 36 31 Contacts View Y 37 Contacts View Y 50 47 48 73 74 100 99 51 Contacts View Y 20 49 75 .108 (2.73) 21 19 22 51 .050 (1.27) 20 37 23 24 26 21 19 14 16 18 1 15 17 .325 (8.26) 15 2 3 4 6 8 9 22 72 97 70 95 68 40 38 91 62 88 89 59 60 86 87 3 58 83 2 29 27 30 55 56 82 1 4 31 32 57 84 85 5 6 33 36 34 61 64 90 8 10 37 35 63 66 7 9 11 12 39 65 94 92 93 13 14 41 42 69 67 96 15 16 43 46 44 71 98 17 18 45 .275 (6.98) 54 80 81 28 53 78 79 52 76 .100 ± .005 (2.54 ± 0.13) 77 100 Contacts View W D All Termination Configurations .100 (2.54) x .100 (2.54) Grid Pattern, Offset .050 (1.27). MDM-9PCBR* MDM-9SCBR* MDM-15PCBR* MDM-15SCBR* MDM-21PCBR* MDM-21SCBR* MDM-25PCBR* MDM-25SCBR* MDM-31PCBR* MDM-31SCBR* MDM-37PCBR* MDM-37SCBR* MDM-51PCBR* MDM-51SCBR* MDM-100PCBR* MDM-100SCBR* A Max. .785 (19.94) .785 (19.94) .935 (23.75) .935 (23.75) 1.085 (27.56) 1.085 (27.56) 1.185 (30.10) 1.185 (30.10) 1.335 (33.91) 1.335 (33.91) 1.485 (37.72) 1.485 (37.72) 1.435 (36.45) 1.435 (36.45) 2.170 (55.12) 2.170 (55.12) B ± .005 (.13) .565 (14.35) .565 (14.35) .715 (18.16) .715 (18.16) .865 (21.97) .865 (21.97) .965 (24.51) .965 (24.51) 1.115 (28.32) 1.115 (28.32) 1.265 (32.13) 1.265 (32.13) 1.215 (30.86) 1.215 (30.86) 1.800 (45.72) 1.800 (45.72) C Max. .334 (8.48) .402 (10.21) .484 (12.29) .552 (13.97) .634 (16.10) .702 (17.83) .734 (18.64) .802 (20.37) .884 (22.45) .952 (24.18) 1.034 (26.26) 1.102 (27.99) .984 (24.99) 1.052 (26.72) 1.384 (35.15) 1.508 (38.10) D Max. .308 (7.82) .308 (7.82) .308 (7.82) .308 (7.82) .308 (7.82) .308 (7.82) .308 (7.82) .308 (7.82) .308 (7.82) .308 (7.82) .308 (7.82) .308 (7.82) .351 (8.92) .351 (8.92) .394 (10.01) .394 (10.01) *For jackpost, add letter "P" or "M7" for sizes 9-51, "M17" for size 100. Dimensions shown in inches (mm) Specifications and dimensions subject to change www.ittcannon.com D-21 E Max. .185 (4.70) .253 (6.43) .185 (4.70) .253 (6.43) .185 (4.70) .253 (6.43) .184 (4.70) .253 (6.43) .185 (4.70) .253 (6.43) .185 (4.70) .253 (6.43) .228 (5.79) .296 (7.52) .271 (6.88) .394 (10.01) F Max. .420 (10.67) .420 (10.67) .420 (10.67) .420 (10.67) .420 (10.67) .420 (10.67) .420 (10.67) .420 (10.67) .520 (13.21) .520 (13.21) .520 (13.21) .520 (13.21) .650 (16.15) .650 (16.15) 1.000 (25.40) 1.000 (25.40) G ± .010 (.25) .250 (6.35) .250 (6.35) .250 (6.35) .250 (6.35) .250 (6.35) .250 (6.35) .250 (6.35) .250 (6.35) .250 (6.35) .250 (6.35) .250 (6.35) .250 (6.35) .300 (7.62) .300 (7.62) .400 (10.16) .400 (10.16) H ± .010 (.25) .230 (5.81) .230 (5.81) .130 (3.30) .130 (3.30) .130 (3.30) .130 (3.30) .130 (3.30) .130 (3.30) .130 (3.30) .130 (3.30) .130 (3.30) .130 (3.30) .150 (3.81) .150 (3.81) .200 (5.08) .200 (5.08) Microminiature Part Number By Shell Size NOTE: Standard lead termination is #24 AWG, solid copper, solder or tin dripped. ca_D1-D102:Layout 1 2/10/11 11:51 AM Page 22 Shielded MDM PCB Connector Family The new shielded MDM PCB-CBR board mount connector is an extension of ITTICS’ standard MDM series thru hole PCB connectors. This new EMI shielded version includes a built in shielding can for effective shielding performance. This new design allows for terminations right to a PCB or to a flex circuit. The connector utilizes the standard MDM shell and is available in condensed board right angle configurations. The pin layouts are from 9-51 positions. Jackpost mounting for use with locking hardware is also available. Current Rating Dielectric Withstanding Voltage Insulation Resistance Contact Resistance Operating Temperature Shock, Vibration 3 AMP 600 VAC sea Level 5000 megaohms maximum 8 milliohms maximum -55° C to +150° C 50 g. , 20 g Performance The table below summarizes the results of key tests performed in accordance with MIL-STD-1344, where applicable. Data is applicable to standard connectors with standard termination. Variations may affect this data, so please consult customer service for further information on your requirements. Microminiature D The table below summarizes the results of key tests performed in accordance with MIL-STD-1344, where applicable. Data is applicable to standard connectors with standard termination. Variations may affect this data, so please consult customer service for further information on your requirements. Test Method Dielectric Withstanding Voltage Method 3001: 600 VAC at sea level 150 VAC at 70,00' altitude Method 3003 Method 1003. Condition A: - 55˚C to +125˚C Method 2004, Condition E: 50 G's, 3 axes, 6 millisecond duration sawtooth pulse Method 2005, Condition IV: 20 G's, 10-2,000 Hz. 12 hrs Insulation Resistance Thermal Shock Physical Shock Vibration Durability Moisture Resistance Salt Spray Contact Resistance (MIL-STD-202) Contact Retention Criteria of Acceptance 500 cycles of mating and unmating, 500 CPH max. Method 1002, Type II, omit steps 7a & 7b Method 1001, Condition B: 48 hours Method 1001, Condition B: At 3 amps At 1 milliamp Per MIL-DTL-83513 No breakdown No breakdown 5,000 megohms minimum No physical damage No physical damage No loss of continuity > 1 µsec No physical damage No loss of continuity > 1 µsec No mechanical or electrical defects Insulation resistance > 100 megohms Shall be capable of mating and unmating, and meet contact resistance requirements 8 milliohms maximum 10 milliohms maximum 5 lb. minimum axial load Dimensions shown in inches (mm) Specifications and dimensions subject to change D-22 www.ittcannon.com ca_D1-D102:Layout 1 2/10/11 11:51 AM Page 23 Shielded MDM PCB Connector Family Talking Dog Example = R MDM * — 37 P * CBR P — T L39 — A174 RoHS Compliance No Letter RoHS not required R RoHS Comliant Assembly Series MDM Micro - D Metal Series Insulator Material No Letter Liquid Crystalline polymer (LCP) Contact Arrangement 9, 15, 21, 31, 37, and 51 Contact Style P Pin (Plug) S Socket (Receptacle) Shielding Option M Grounding Metal Backshell (Consult factory for availability) Termination Type CBR Board Mount, Condensed Right Angle .100” X . 100” Thru-Hole Staggered Grid Mounting Hardware Code (Shell Flange) No Letter Hardware omitted P Standard Jackpost M7 Mil-Spec Jackpost Mounting Hardware Code (For PCB) No Letter Standard Mounting Holes .092” dia. mounting holes for sizes 9-51 T Threaded Insert #2-56 thread for shell sizes 9 thru 51 D Shell Finish and Mechanical Modification Codes None Yellow Chromate / Cadmium over Nickel (A101) A174 Electroless Nickel A172 Gold over Nickel Note: Consult factory for version with jack screws without mounting holes for use with flex circuit applications. Consult factory for tooled versions. Dimensions shown in inches (mm) Specifications and dimensions subject to change www.ittcannon.com D-23 Microminiature PC Tail Length Modification Code No Letter Standard .109” ± .015” long #24AWG solder coated pigtail Modify length with “L” code as required. Refer to separate “L” code options, i.e. L39 = .250” ± .015” # - Factory assigned for variation to standard configuration