ca_D1-D102:Layout 1 2/10/11 11:51 AM Page 1 ca_D1-D102:Layout 1 2/10/11 11:52 AM Page 89 The NANO Line - .025" Contact Spacing NANO contacts incorporate the highly reliable Twist Pin concept, which allows continuity in very dense areas and under severe shock and vibration, requiring low engagement and separation forces. Termination can consist of uninsulated pigtails or insulated wire all preharnessed at our factory to your specifications. Due to various industry application requirements the NANO line is available in several different configurations, available in strip, metal shell and plastic, rectangular or circular configurations with center jackscrew. Successful applications for NANO connectors are many and varied, from the Air Force's AIRS program to actual human implantations in the medical research field. Specifications NTP NDM Single Row Strip Metal Shell Rectangular • Contact Rating - 1 amp max. • Minimum contact centers - 0.025 (0.64). Type • Wire sizes - #32 AWG stranded, #30 AWG solid. • Contact termination - integral pigtail or multiple indent crimp. Shell NJSC Alum. alloy 2024 T351 per QQ-A-250 or 6061-T6 per QQ-A-200 nickel plate • Contact rentention - fixed via epoxy. • Contact materials - socket: nickel silver. pin bundle: precious metal alloy or BeCu. pin Sleeve: nickel silver or cartridge brass. • Mating/unmating force - 6oz. per contact max. NJS Rectangular Circular Center Jackscrew Center Jackscrew Insulator Phenolic Phenolic Polyester Polyester No. of Contacts 1-40 Contacts 9, 15, 21, 25 31, 37 9, 24, 44 27, 72, 266 Pin Bundle Material - Precious metal per ASTM B477 and ASTM B541, or BeCu per CDA alloy 172 & 102 - Socket Sleeve Material - Nickel silver/ASTM B122, Comp. B- Pin Sleeve Material - Nickel silver per ASTM B122, Comp. B or Cartridge Brass per CDA alloy 260 - Test Data Test Method Criteria of Acceptance Dielectric Withstanding Voltage Method 301: 350 VAC at sea level 100 VAC at 70,000' altitude No breakdown No breakdown Insulation Resistance Thermal Shock Method 302, Condition A Method 107, Condition B: -65˚C to +125˚C 5,000 megohms minium No physical damage Physical Shock Method 213, Condition I: 100 G's, 3-axes, 6 millisecond duration sawtooth pluse Method 204, Condition D: 15 G's, 10-2,000 Hz, 12 hours No physical damge No loss of continuity > 1 µ sec Durability 500 cycles of mating and unmating, 500 CPH max. No mechanical or electrical defect Moisture Resistance Method 106, omit 7b Insulation resistance > 100 megohms Salt Spray Method 101, Condition B: 48 hours Shall be capable of mating and unmating, and meet contact resistance requirements Contact Resistance Method 307: Vibration At 1 amp At 100 milliamps Contact Retention - Dimensions shown in inches (mm) Specifications and dimensions subject to change www.ittcannon.com tor with standard terminations. Variations may affect this data, so please consult the factory for further information on your requirements. D-89 No physical damge No loss of continuity > 1 µ sec 30 milliohms maximum } With gold plated Be- Cu Nanopin contact. 60 milliohms maximum With precious metal } 80 milliohms maximum alloy Nanopin contact. 3 lb. minimum axial load Microminiature The table below summarizes the results of key tests performed in accordance with MIL-STD-202, where applicable. Data is applicable to standard connec- D