DC High Voltage HARTMAN Aerospace Power Products Features: • SPST N.O. Main Contacts • Economizing Coil • 340 VDC • 650 Amps • High Reliability • Meets many requirements of MIL-R-6106 A-751YC SPST N.O., 650 Amps, 340 VDC CONTACTOR CONFIGURATION Dimensions for this product are expressed in inches. Multiply values by 25.4 for millimeters. PRODUCT SPECIFICATIONS Construction Main Contacts: Configuration Voltage (Nominal) Current (Resistive) Auxiliary Contacts: Configuration Voltage (Nominal) Current Resistive Inductive Lamp Coil Data: Duty Cycle Voltage (Nominal) Pick-Up Voltage Drop-Out Voltage Coil Current @ 28 VDC & +25°C In-Rush Hold Operating Temperature Life: Electrical Mechanical Weight Maximum Gasket Sealed, Vented SPST N.O. 340 VDC 650 Amps Notes: 1 FORM C 28 VDC 10 Amps 5 Amps 3 Amps Continuous (Economized) 28 VDC 20 VDC Maximum 1.5 - 12 VDC 15.6 Amps 0.32 Amp -55°C to +71°C 500 Cycles, Make, Carry & Break; 50,000 Cycles, Make & Carry 100,000 Cycles 7 Lbs. For factory-direct application assistance, contact the HARTMAN product team at (419) 521-9500, Fax (419) 526-2749. © 2004 by Tyco Electronics Corporation. All Rights Reserved. HARTMAN and TYCO are trademarks. Catalog (web doc only) Revised 5-04 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967