Product Brief E R P I IL M Y R A N Features: XC2200I - iCache 16/32-bit µC for Automotive Body Applications The XC2200I microcontroller series offers a strong performance boost by integrating the INSTRUCTION CACHE (iCache) between the embedded Flash and the CPU. This results in a 30% higher code execution speeds. With frequency improvement of up to 128MHz, performance is additionally improved by up to 50%. iCache Flash memory mapping is family-compatible and allows easy software porting. The combination of CPU frequency rate of 128MHz, INSTRUCTION CACHE and up to 1MB of embedded Flash make XC2200I a perfect match for automotive body applications that require a higher range of performance or the potential for future performance improvements. Targeting Automotive Body Applications High-end BCM Gateway Highlights High performance 16-/32-bit C166SV2 CPU with 5-stage pipeline Instruction cache (iCache) Up to 128 MIPS peak performance @ 128MHz CPU clock Up to 1 MB of flash memory and 90 KB of RAM Up to 28 ADC channels Up to 6 CAN with gateway functionality Optional FlexRay interface www.infineon.com/XC2000 10ns multiplication (16 x 16-bit), background division (32/16bit) and multiply-and-accumulate (MAC) instructions 16-channel interrupt-driven data transfer facilities via peripheral event controller (PEC) Up to 28-channel dual A/D converter with optional concurrent sampling, conversion time ~0.675μs Two 16-channel general purpose capture/compare units (CC1/CC2) Up to 4 capture/compare units (CCU6) for flexible PWM signal generation for any kind of motor control Multi-functional general purpose timer unit with 5 timers Up to 10 serial interface channels to be used as UART, LIN, SPI, I2C, I2S On-chip MultiCAN interface (Rev. 2.0B active) with 256 message objects, up to 6 CAN nodes and gateway functionality Up to 2 channels of FlexRay 16 priority levels providing 112 interrupt nodes On-chip real time clock Programmable watchdog timer and oscillator watchdog Up to 119 general purpose I/O lines with flexible pin assignment On-chip bootstrap loader On-chip debug support via 2-wire DAP interface Single voltage supply of 3.3 to 5V 100/144-pin green LQFP package, 0.5mm (19.7mil) pitch Temperature range: -40 to +125°C Supported by a large range of development tools Product Brief XC2200I - iCache 16/32-bit µC for Automotive Body Applications Type Frequenc [MHz] eFlash [KByte] RAM [KByte] USIC* Channels CAN Nodes CCU** Modules ADC Channels Package SAK-XC2268I-136F128L 128 1.088 90 10 6 5 16 PG-LQFP-100 SAK-XC2269I-136F128L 128 1.088 90 10 6 5 16 PG-LQFP-100 SAK-XC2288I-136F128L 128 1.088 90 10 6 5 28 PG-LQFP-144 SAK-XC2289I-136F128L 128 1.088 90 10 6 5 28 PG-LQFP-144 *configurable module: LIN, UART, SSC/SPI, I²C, I²S *capture compare units: CCU6/CCU2 How to reach us: http://www.infineon.com Published by Infineon Technologies AG 81726 Munich, Germany © 2010 Infineon Technologies AG All Rights Reserved. Legal Disclaimer The information given in this Product Brief shall in no event be regarded as a guarantee of conditions or characteristics. With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation, warranties of non-infringement of intellectual property rights of any third party. Information For further information on technology, delivery terms and conditions and prices, please contact the nearest Infineon Technologies Office (www.infineon.com). Published by Infineon Technologies AG Warnings Due to technical requirements, components may contain dangerous substances. For information on the types in question, please contact the nearest Infineon Technologies Office. Infineon Technologies components may be used in life-support devices or systems only with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that health of the user or other persons may be endangered. Order Number: 00000