Product Brief Features XC2200U - Series 16/32-bit µC for Automotive Body Applications The XC2200U series, with the XC222xU (VQFN-48) and XC221xU (TSSOP-38) derivatives, further enlarges the XC2200 microcontroller family in the ultra-low-end. With a maximum memory size of 64kB Flash and up to 8kB RAM, the microcontrollers of this series are well suited for cost-sensitive body applications. Targeted Automotive Body Applications Lighting Power operating systems Start Stop Highlights: High performance 16-/32-bit C166SV2 CPU with 5-stage pipeline Up to 40 MIPS peak performance @ 40MHz CPU clock Single voltage supply (core supply over embedded voltage regulator) On-chip window watchdog High speed 12-bit ADC with up to 10 channels Small packages for space critical application/saving of PCB space Low power consumption DAP - Device Access Port (2 wire JTAG, replaces 5 wire JTAG) www.infineon.com/XC2000 High-performance CPU with five-stage pipeline and MPU 16 priority levels providing 96 interrupt nodes 64kb Flash, up to 8kB SRAM Memory content protection through Error Correction Code (ECC) 12bit AD-converter with upto 10-channels, optional data preprocessing data reduction, range check), open wire detection, conversion time ~0.675μs One 16-channel general purpose capture/compare units (CCU2) one capture/compare unit (CCU6) for flexible PWM signal generation for any kind of motor control Multi-functional general purpose timer unit with 5 timers 2 serial flexible interface channels (UART, LIN, SPI, I2C, I2S) On-chip system timer and on-chip real time clock Programmable watchdog timer and oscillator watchdog On-chip window watch dog with clock source separate from fsys Up to 35 general purpose I/O lines with flexible pin assignment On-chip bootstrap loader On-chip debug support via Device Access Port (DAP) or JTAG interface Single voltage supply of 3.3 to 5V 48 pin green VQFN, 38-pin green TSSOP package for space critical applications Temperature range: -40 to +125°C Supported by a large range of development tools Free of charge low level driver CAN, LIN, UART(USIC) Product Brief XC2200U - Series 16/32-bit µC for Automotive Body Applications Type [MHz] [KByte] [KByte] USIC* Channels CAN Nodes CCU** Modules ADC Channels Package SAK-XC2210U-8F40R 40 32 8 2 - 2 7 TSSOP-38 SAK-XC2210U-4F40R 40 64 8 2 - 2 7 TSSOP-38 SAK-XC2220U-4F40V 40 32 8 2 - 2 10 VQFN-48 SAK-XC2220U-8F40V 40 64 8 2 - 2 10 VQFN-48 Published by Infineon Technologies AG 85579 Neubiberg, Germany © 2011 Infineon Technologies AG. All Rights Reserved. Visit us: www.infineon.com Order Number : B 158-H960 7 -X-X-7600 Date: 05 / 2011 ATTenTion pleAse! The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics (“Beschaffenheitsgarantie”). With respect to any examples or hints given herein, any typical values stated herein and/ or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation warranties of non-infringement of intellectual property rights of any third party. informATion For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office (www.infineon.com). WArnings Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered.