LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only LED SMD Pb LG-170RGB-CT DATA SHEET DOC. NO : QW0905-LG-170RGB-CT REV. : B DATE : 17 - Feb. - 2015 發行 立碁電子 DCC LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 1/14 PART NO. LG-170RGB-CT Features: 1. Package in 8.0mm carrier tape on 7" diameter reel. 2. Compatible with automatic placement equipment. 3. Compatible with reflow solder process. Descriptions: 1. The LG-170 SMD Taping is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained. 2. Besides, lightweight makes them ideal for miniature applications. etc. Applications: 1. Automotive : backlighting in dashboard and switch. 2. Telecommunication : indicator and backlighting in telephone and fax. 3. Flat backlight for LCD, switch and symbol 4. General use. Device Selection Guide: PART NO LG-170RGB-CT MATERIAL COLOR Emitted AlGaInP Red lnGaN Green lnGaN Blue Lens Water Clear LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 2/14 PART NO. LG-170RGB-CT Package Dimensions 0.8 Anode Mark 1 4 0.3 Anode Mark Resin 0.4 R Soldering Terminal 1.4 2.0 B G 0.4 2 0.3 3 PCB 0.4 1.3 4 1 R 2 G 3 B Note : 1.All dimension are in millimeter tolerance is ±0.1mm unless otherwise noted. 2.Specifications are subject to change without notice. Recommended Soldering Pad Dimensions 0.7 0.3 0.7 0.8 0.8 0.8 Note : The tolerances unless mentioned is ±0.1mm,Angle±0.5. Unit=mm. 0.4 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 3/14 PART NO. LG-170RGB-CT Absolute Maximum Ratings at Ta=25 ℃ Parameter Ratings Symbol UNIT URF DGM DBK Power Dissipation PD 120 108 108 mW Peak Forward Current Duty 1/10@10KHz IFP 130 100 100 mA Forward Current IF 50 30 30 mA Reverse Current @5V Ir 10 50 50 μA Electrostatic Discharge ESD 2000 500 500 V Operating Temperature Topr -20 ~ + 80 ℃ Storage Temperature Tstg -30 ~ + 100 ℃ LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 4/14 PART NO. LG-170RGB-CT Typical Electrical & Optical Characteristics (Ta=25 ℃) Items Luminous Intensity Dominant Wavelength Spectral Line Half-Width Forward Voltage Viewing Angle Symbol Iv λD △λ VF 2θ 1/2 Min. Typ. Max. UNIT URF 32 100 ---- DGM 200 500 ---- DBK 50 125 ---- URF ---- 630 ---- DGM ---- 525 ---- DBK ---- 470 ---- URF ---- 20 ---- DGM ---- 36 ---- DBK ---- 30 ---- URF 1.5 ---- 2.4 DGM 2.8 ---- 3.6 DBK 2.8 ---- 3.6 URF ---- 140 ---- DGM ---- 140 ---- DBK ---- 140 ---- Note : The luminous intensity data did not including ±15% testing tolerance. CONDITION mcd IF=20mA nm IF=20mA nm IF=20mA V IF=20mA deg IF=20mA LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 5/14 PART NO. LG-170RGB-CT Luminous Intensity Classification BIN CODE URF Min. Max. N 32 50 P 50 80 Q 80 125 BIN CODE DGM Iv(mcd) at 20mA Min. Max. S 200 320 T 320 500 U 500 800 V-1 800 1000 V-2 1000 1250 BIN CODE DBK Iv(mcd) at 20mA Iv(mcd) at 20mA Min. Max. P 50 80 Q 80 125 R 125 200 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 6/14 PART NO. LG-170RGB-CT Typical Electro-Optical Characteristics Curve URF CHIP Fig.1 Forward current vs. Forward Voltage Fig.2 Relative Intensity vs. Forward Current 3.5 3.0 Relative Intensity Normalize @20mA Forward Current(mA) 1000 100 10 1.0 2.5 2.0 1.5 1.0 0.5 0 0.1 1.0 1.5 2.0 2.5 3.0 1.0 Fig.3 Forward Voltage vs. Temperature Fig.4 Relative Intensity vs. Temperature 3.0 Relative Intensity@20mA Normalize@25℃ 1.2 Forward Voltage@20mA Normalize @25℃ 1000 Forward Current(mA) Forward Voltage(V) 1.1 1.0 0.9 0.8 -40 -20 -0 20 40 60 80 Fig.5 Relative Intensity vs. Wavelength 1.0 0.5 0 550 600 650 Wavelength (nm) 100 2.5 2.0 1.5 1.0 0.5 0 -40 -20 -0 20 40 60 80 Ambient Temperature( ℃) Ambient Temperature( ℃) Relative Intensity@20mA 100 10 700 Fig.6 Directive Radiation 100 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 7/14 PART NO. LG-170RGB-CT Typical Electro-Optical Characteristics Curve DGM CHIP Fig.1 Forward current vs. Forward Voltage Fig.2 Relative Intensity vs. Forward Current 3.0 Relative Intensity Normalize @20mA Forward Current(mA) 1000 100 10 1.0 2.5 2.0 1.5 1.0 0.5 0.0 0.1 1.0 2.0 3.0 4.0 5.0 1.0 10 Fig.3 Forward Voltage vs. Temperature Fig.4 Relative Intensity vs. Temperature 1.2 3.0 Relative Intensity@20mA Normalize @25℃ Forward Voltage@20mA Normalize @25℃ 1000 Forward Current(mA) Forward Voltage(V) 1.1 1.0 0.9 0.8 -40 -20 0 20 40 60 80 100 Fig.5 Relative Intensity vs. Wavelength 0.5 0.0 500 550 Wavelength (nm) 2.0 1.5 1.0 0.5 0.0 -40 -20 0 20 40 60 Fig.6 Directive Radiation 1.0 450 2.5 80 Ambient Temperature( ℃) Ambient Temperature( ℃) Relative Intensity@20mA 100 600 100 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 8/14 PART NO. LG-170RGB-CT Typical Electro-Optical Characteristics Curve DBK CHIP Fig.1 Forward current vs. Forward Voltage Fig.2 Relative Intensity vs. Forward Current 3.0 Relative Intensity Normalize @20mA Forward Current(mA) 1000 100 10 1.0 0.1 2.5 2.0 1.5 1.0 0.5 0.0 1.0 2.0 3.0 4.0 5.0 1 10 1.2 1.1 1.0 0.9 0.8 0 20 40 60 80 100 Fig.5 Relative Intensity vs. Wavelength 1.0 0.5 0.0 400 450 500 Wavelength (nm) 3.0 2.5 2.0 1.5 1.0 0.5 0.0 -40 -20 0 20 40 60 80 Ambient Temperature( ℃) Ambient Temperature( ℃) Relative Intensity@20mA Fig.4 Relative Intensity vs. Temperature Relative Intensity@20mA Normalize @25℃ Forward Voltage@20mA Normalize @25℃ Fig.3 Forward Voltage vs. Temperature -20 1000 Forward Current(mA) Forward Voltage(V) -40 100 550 Fig.6 Directive Radiation 100 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 9/14 PART NO. LG-170RGB-CT Carrier Type Dimensions 2.0 1.5 4.0±0.2 0.25 1.75 3.5±0.2 8.0±0.3 5.3 2.22 Polarity 0.87 4.0±0.2 1.36 Note : The tolerances unless mentioned is ±0.1mm,Angle ± 0.5. Unit=mm. ‧ Packing Specifications Label Aluminum Moist-Proof bag Label Part No. Description Quantity/Reel LG-170RGB-CT 8.0mm tape,7"reel 4000 devices LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LG-170RGB-CT Page 10/14 Label Explanation LIGITEK ELECTRONICS CO., LTD. Pb BIN : Luminous Intensity PART : LG-170RGB-CT LOT : GS11470168 QTY(PCS): 4000 VF:2.8-3.6 BIN/HUE : P/T/Q VF:2.8-3.6 VF:1.5-2.4 VF : Forward Voltage Reel Dimensions 0.2 0.4 0.8 0.8 0.6 0.2 0.4 0.6 2.0±0.5 178±1.5 6.0±1.0 9.0±1.0 ψ13.5±1.0 12.0±1.0 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 11/14 PART NO. LG-170RGB-CT Box Explanation 1. 5 BAG / INNER BOX 2. INNER BOX SIZE : L X W X H 23cm X 8.5cm x 26cm H W L 3. 10 INNER BOXES / CARTON 4. CARTON SIZE : L X W X H 58cm X 34cm x 35cm L W H LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 12/14 PART NO. LG-170RGB-CT Recommended Soldering Conditions 1. Hand Solder Basic spec is ≦ 280℃ 3 sec one time only. 2 PB-Free Reflow Solder 1~5°C/sec 1~5°C/sec Preheat 180~200°C 260°C Max. 10sec.Max 6°C/sec Above 220°C 60 sec.Max. 120 sec.Max. Note: 1.Reflow soldering should not be done more than two times. 2.When soldering,do not put stress on the LEDs during heating. 3.After soldering,do not warp the circuit board. LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 13/14 PART NO. LG-170RGB-CT Precautions For Use: Storage time: 1.The operation of Temperatures and RH are : 5 ℃~35℃,RH60%. 2.Once the package is opened, the products should be used within a week. Otherwise, they should be kept in a damp proof box with descanting agent. Considering the tape life, we suggest our customers to use our products within a year(from production date). 3.If opened more than one week in an atmosphere 5 ℃ ~ 35℃,RH60%, they should be treated at 60 ℃±5 ℃fo r 15hrs. Drive Method: LED is a current operated device, and therefore, requirer some kind of current limiting incorporated into the driver circuit. This current limiting typically takes the form of a current limiting resistor placed in series with the LED. Consider worst case voltage variations than could occur across the current limiting resistor. The forwrd current should not be allowed to change by more than 40% of its desired value. Circuit model A Circuit model B LED LED (A) Recommended circuit. (B) The difference of brightness between LED could be found due to the VF-IF characteristics of LED. Cleaning: Use alcohol-based cleaning solvents such as isopropyl alcohol to clean the LED. ESD(Electrostatic Discharge): Static Electricity or power surge will damage the LED. Use of a conductive wrist band or anti-electrosatic glove is recommended when handing these LED. All devices, equipment and machinery must be properly grounded. LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 14/14 PART NO. LG-170RGB-CT Reliability Test: Classification Test Item Test Condition Reference Standard Operating Life Test 1.Ta=Under Room Temperature As Per Data Sheet Maximum Rating. 2.If=20mA 3.t=1000 hrs (-24hrs, +72hrs) MIL-STD-750D: 1026 MIL-STD-883D: 1005 JIS C 7021: B-1 High Temperature Storage Test 1.Ta=105 ℃±5℃ 2.t=1000 hrs (-24hrs, +72hrs) MIL-STD-883D:1008 JIS C 7021: B-10 Low Temperature Storage Test 1.Ta=-40 ℃±5℃ 2.t=1000 hrs (-24hrs, +72hrs) JIS C 7021: B-12 High Temperature High Humidity Storage Test 1.Ta=65 ℃±5℃ 2.RH=90%~95% 3.t=1000hrs¡Ó2hrs Endurance Test Thermal Shock Test Solderability Test Environmental Test Temperature Cycling IR Reflow 1.Ta=105 ℃±5℃&-40℃±5℃ (10min) (10min) 2.total 10 cycles 1.T.Sol=235 ℃±5℃ 2.Immersion time 2 ±0.5sec 3.Coverage ≧95% of the dipped surface 1.105 ℃ ~ 25℃ ~ -40℃ 30mins 5mins 30mins 2.10 Cyeles 1.T=260°C Max. 10sec.Max. 2. 6 Min MIL-STD-202F:103B JIS C 7021: B-11 MIL-STD-202F: 107D MIL-STD-750D: 1051 MIL-STD-883D: 1011 MIL-STD-202F: 208D MIL-STD-750D: 2026 MIL-STD-883D: 2003 IEC 68 Part 2-20 JIS C 7021: A-2 MIL-STD-202F: 107D MIL-STD-750D: 1051 MIL-STD-883D: 1010 JIS C 7021: A-4 MIL-STD-750D:2031.2 J-STD-020