Ligitek Photovoltaic Co., Ltd. FEATURES: ‧Multicrystalline silicon photovoltaic module. ‧High power module using 6” multicrystalline solar cell. ‧Bypass diode is attached minimize power reduction caused by shade. ‧48 solar cells and connection in series. ‧Using optical low iron tempered glass, EVA resin, module with aluminum frame for outdoor use. ‧The module will maintain 90% of minimum specification performance along the first 12 years, and will maintain 80% of minimum specification performance along sequent 13 years. LM195BB6800 ~ LM220BB6800 Maximum power (Pmax) 195W 200W 205W 210W 215W 220W Maximum power voltage (Vpm) 23.33 V 23.48 V 23.62 V 23.77 V 23.92 V 24.07 V Maximum power current (Ipm) 8.36 A 8.52 A 8.68 A 8.84 A 8.99 A 9.14 A Open circuit voltage (Voc) 30.08 V 30.22 V 30.35 V 30.48 V 30.62 V 30.75 Short circuit current (Isc) 8.68 A 8.81 A 8.93 A 9.06 A 9.19 A 9.31 A Module efficiency (ηm) 15.0% 15.4% 15.8% 16.2% 16.6% 17.0% No. & type solar cells Maximum system voltage Series fuse rating 48 in series/ 6”(156x156 mm) multicry TUV:DC 1000 V/UL:DC 600 V 15 A Operating temperature ±3% -40 to +90 ℃ Storage temperature -40 to +90 ℃ Performance tolerance Dimensions Weight Output Terminal(Tyco J-Box) (STC) Standard Test Conditions: 25°C, 1 kW/m², AM 1.5 1309x990x38.1 mm±2 mm/51.5”x39”x1.5”±0.08” 14.9 kg/32.85 lbs 1394462-4(-)/6-1394461-2(+) C1(RD-W04-02B) LM195BB6800 ~ LM220BB6800 ELECTRICAL CHARACTERISTICS DEPENDENCE ON TEMPERATURE Amps(A) Amps(A) o CELL TEMP. 25 C 10 AM1.5,1000W/m2 10 1000W/m2 1000W/m2 8 8 800W/m2 6 o 75 C 6 600W/m2 4 4 2 2 0 o 50 C o 25 C 0 0 10 20 30 40 50 0 10 Volts(V) 20 30 40 50 Volts(V) Temperature coefficient of Isc: 0.05%/℃ Power temperature coefficient: -0.46%/℃ Temperature coefficient of Voc: -0.35%/℃ NOCT:46±1℃ OUTLINE DIMENSIONS Section A-A Lead Wire + Field wiring:Cu wiring only, min. 12 AWG(4mm²), insulated for 90℃ min. C1(RD-W04-02B)