Ligitek Photovoltaic Co., Ltd. FEATURES: ‧Multicrystalline silicon photovoltaic module. ‧High power module using 6” multicrystalline solar cell. ‧Bypass diode is attached minimize power reduction caused by shade. ‧36 solar cells and connection in series. ‧Using optical low iron tempered glass, EVA resin, module with aluminum frame for outdoor use. ‧±5400 Pa testing load, extended test to CNS13972 for wind and snow loads. ‧The module will maintain 90% of minimum specification performance along the first 12 years, and will maintain 80% of minimum specification performance along sequent 13 years. LM110BB00/LM115BB00/LM120BB00/LM125BB00/LM130BB00/ LM135BB00/LM140BB00/ Maximum power (Pmax) 110W 115W 120W 125W 130W 135W 140W Maximum power voltage (Vpm) 17.05 V 17.16 V 17.34 V 17.55 V 17.75 V 17.96 V 18.16 V Maximum power current (Ipm) 6.46 A 6.70 A 6.93 A 7.13 A 7.33 A 7.52 A 7.71 A Open circuit voltage (Voc) 21.45 V 21.56 V 21.85 V 21.89 V 22.10 V 22.14 V 22.25 V Short circuit current (Isc) 7.21 A 7.40 A 7.77 A 7.86 A 8.06 A 8.13 A 8.27 A Module efficiency (ηm) 11.4% 11.9% 12.4% 12.9% 13.4% 14.0% 14.5% No. & type solar cells Maximum system voltage 36 in series/ 6”(156x156 mm) multicry TUV:DC 1000 V/UL:DC 600 V Series fuse rating 15 A Performance tolerance ±3% Operating temperature -40 to +90 ℃ Storage temperature -40 to +90 ℃ 1466x660x38.1 mm±2 mm/57.7”x26”x1.5”±0.08” Dimensions 11.8 kg/26.01 lbs Weight Output Terminal(Tyco J-Box) (Lapp J-Box) (STC) Standard Test Conditions: 25°C, 1 kW/m², AM 1.5 1394462-4(-)/6-1394461-2(+) EPIC SOLAR B5(RD-W04-02B) LM110BB00/LM115BB00/LM120BB00/LM125BB00/LM130BB00/ LM135BB00/LM140BB00/ ELECTRICAL CHARACTERISTICS DEPENDENCE ON TEMPERATURE ) A ( s p m A ) A ( s p m A o CELL TEMP. 25 C 10 AM1.5,1000W/m2 10 1000W/m2 1000W/m2 8 8 800W/m2 o 75 C 50 C 25 C 6 6 o 600W/m2 o 4 4 2 2 0 0 20 30 0 40 Temperature coefficient of Isc: 0.05%/℃ Power temperature coefficient: -0.46%/℃ Temperature coefficient of Voc: -0.35%/℃ NOCT:46±1℃ 10 20 ) V ( s t l o V 10 ) V ( s t l o V 0 30 40 OUTLINE DIMENSIONS Section A-A A A ---- ++++ ---- Lead Wire ++++ ---- ++++ Field wiring:Cu wiring only, min. 12 AWG(4mm²), insulated for 90℃ min. B5(RD-W04-02B)