Ligitek Photovoltaic Co., Ltd. FEATURES: ‧Single crystalline silicon photovoltaic module. ‧High power module using 3 busbar design 6” mono crystalline solar cell. ‧Bypass diode is attached minimize power reduction caused by shade. ‧60 solar cells and connection in series. ‧Using optical low iron tempered glass, EVA resin, module with aluminum frame for outdoor use. ‧±5400 Pa testing load, extended test to CNS13972 for wind and snow loads. ‧The module will maintain 90% of minimum specification performance along the first 12 years, and will maintain 80% of minimum specification performance along sequent 13 years. LM245BA6A00/LM250BA6A00/LM255BA6A00/LM260BA6A00/ Maximum power (Pmax) 245W 250W 255W 260W Maximum power voltage (Vpm) 30.10V 30.27V 30.42V 30.52V Maximum power current (Ipm) 8.14A 8.26A 8.40A 8.52A Open circuit voltage (Voc) 37.80V 37.86V 37.98V 38.10V Short circuit current (Isc) 8.62A 8.68A 8.76A 8.84A Module efficiency (ηm) 15.2% 15.5% 15.8% 16.2% No. & type solar cells Maximum system voltage 60 in series/ 6”(156x156 mm) single/ 3 busbar TUV:DC 1000 V/UL:DC 600 V Series fuse rating 15 A Performance tolerance ±3% Operating temperature -40 to +90 ℃ Storage temperature -40 to +90 ℃ Dimensions Weight Output Terminal(Tyco J-Box) (STC) Standard Test Conditions: 25°C, 1 kW/m², AM 1.5 1626x990x38.1 mm±2 mm/64”x39”x1.5”±0.08” 20.0 kg/44.09 lbs 1394462-4(-)/6-1394461-2(+) B1(RD-W04-02B) LM245BA6A00/LM250BA6A00/LM255BA6A00/LM260BA6A00/ ELECTRICAL CHARACTERISTICS DEPENDENCE ON TEMPERATURE ) A ( s p m A ) A ( s p m A o CELL TEMP. 25 C 10 8 6 AM1.5,1000W/m2 10 1000W/m2 1000W/m2 8 800W/m2 600W/m2 o 75 C 50 C 25 C 6 o o 4 4 2 2 0 10 20 ) V ( s t l o V 0 30 40 0 50 10 Temperature coefficient of Isc: 0.04%/℃ Power temperature coefficient: -0.43%/℃ Temperature coefficient of Voc: -0.33%/℃ NOCT:46±1℃ 20 ) V ( s t l o V 0 30 40 50 OUTLINE DIMENSIONS Section A-A A A Lead Wire ---- ---- ++++ ++++ Field wiring:Cu wiring only, min. 12 AWG(4mm²), insulated for 90℃ min. B1(RD-W04-02B)