8.89mmx3.81mm LED LIGHT BAR Part Number: KB2500SGD Super Bright Green Features Description z Uniform light emitting area. The Super Bright Green source color devices are made with z Low current operation. Gallium Phosphide Green Light Emitting Diode. z Easily mounted on P.C. boards. z Flush mountable. z Excellent on/off contrast. z Can be used with panels and legend mounts. z Categorized for luminous intensity. z RoHS compliant. Package Dimensions& Internal Circuit Diagram Notes: 1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01")unless otherwise noted. 2. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. SPEC NO: DSAA4477 REV NO: V.7 DATE: MAR/24/2011 PAGE: 1 OF 6 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: J.Yu ERP: 1334000109 Selection Guide Part No. Dice KB2500SGD Iv (mcd) [1] @ 20mA Lens Type Super Bright Green (GaP) Green Diffused Min. Typ. 12 26 Note: 1. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength Super Bright Green λD [1] Dominant Wavelength Δλ1/2 Max. Units Test Conditions 565 nm IF=20mA Super Bright Green 568 nm IF=20mA Spectral Line Half-width Super Bright Green 30 nm IF=20mA C Capacitance Super Bright Green 15 pF VF=0V;f=1MHz VF [2] Forward Voltage Super Bright Green 2.2 2.5 V IF=20mA IR Reverse Current Super Bright Green 10 uA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Super Bright Green Units 62.5 mW DC Forward Current 25 mA Peak Forward Current [1] 140 mA 5 V Power dissipation Reverse Voltage Operating / Storage Temperature Lead Solder Temperature[2] -40°C To +85°C 260°C For 3-5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. SPEC NO: DSAA4477 REV NO: V.7 DATE: MAR/24/2011 PAGE: 2 OF 6 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: J.Yu ERP: 1334000109 Super Bright Green KB2500SGD SPEC NO: DSAA4477 REV NO: V.7 DATE: MAR/24/2011 PAGE: 3 OF 6 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: J.Yu ERP: 1334000109 PACKING & LABEL SPECIFICATIONS KB2500SGD SPEC NO: DSAA4477 REV NO: V.7 DATE: MAR/24/2011 PAGE: 4 OF 6 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: J.Yu ERP: 1334000109 SPEC NO: DSAA4477 REV NO: V.7 DATE: MAR/24/2011 PAGE: 5 OF 6 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: J.Yu ERP: 1334000109 SPEC NO: DSAA4477 REV NO: V.7 DATE: MAR/24/2011 PAGE: 6 OF 6 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: J.Yu ERP: 1334000109