KINGBRIGHT DF3SRD

6.8mmx19.9mm LIGHT BAR
Part Number: DF3SRD
Features
Super Bright Red
Description
UNIFORM LIGHT EMITTING AREA.
The Super Bright Red source color devices are made with
EASILY MOUNTED ON P.C. BOARDS OR
Gallium Aluminum Arsenide Red Light Emitting Diode.
NDUSTRY STANDARD SOCKETS.
FLUSH MOUNTABLE.
EXCELLENT ON/OFF CONTRAST.
CAN BE USED WITH PANELS AND LEGEND MOUNTS.
MECHANICALLY RUGGED.
I.C. COMPATIBLE.
RoHS COMPLIANT.
Package Dimensions& Internal Circuit Diagram
1.All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01")unless otherwise noted.
2.Specifications are subject to change without notice.
SPEC NO: DSAD1417
REV NO: V.5
DATE: MAY/14/2007
APPROVED: WYNEC
CHECKED: Joe Lee
DRAWN: Y.L.LI
PAGE: 1 OF 4
ERP: 1334000058
Selection Guide
Part No.
Dice
DF3SRD
Iv (mcd) [1]
@ 20mA
Lens Type
Super Bright Red (GaAlAs)
RED DIFFUSED
Min.
Typ.
70
300
Note:
1. Luminous intensity/ luminous Flux: +/-15%.
Electrical / Optical Characteristics at TA=25°C
Symbol
Parameter
Device
Typ.
λpeak
Peak Wavelength
Super Bright Red
λD [1]
Dominant Wavelength
Δλ1/2
Max.
Units
Test Conditions
660
nm
IF=20mA
Super Bright Red
640
nm
IF=20mA
Spectral Line Half-width
Super Bright Red
20
nm
IF=20mA
C
Capacitance
Super Bright Red
45
pF
VF=0V;f=1MHz
VF [2]
Forward Voltage
Super Bright Red
1.85
2.5
V
IF=20mA
IR
Reverse Current
Super Bright Red
10
uA
VR=5V
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
Absolute Maximum Ratings at TA=25°C
Parameter
Super Bright Red
Units
Power dissipation
75
mW
DC Forward Current
30
mA
Peak Forward Current [1]
155
mA
5
V
Reverse Voltage
Operating / Storage Temperature
Lead Solder Temperature[2]
-40°C To +85°C
260°C For 3-5 Seconds
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. 2mm below package base.
SPEC NO: DSAD1417
REV NO: V.5
DATE: MAY/14/2007
APPROVED: WYNEC
CHECKED: Joe Lee
DRAWN: Y.L.LI
PAGE: 2 OF 4
ERP: 1334000058
Super Bright Red
DF3SRD
SPEC NO: DSAD1417
REV NO: V.5
DATE: MAY/14/2007
APPROVED: WYNEC
CHECKED: Joe Lee
DRAWN: Y.L.LI
PAGE: 3 OF 4
ERP: 1334000058
PACKING & LABEL SPECIFICATIONS
DF3SRD
SPEC NO: DSAD1417
REV NO: V.5
DATE: MAY/14/2007
APPROVED: WYNEC
CHECKED: Joe Lee
DRAWN: Y.L.LI
PAGE: 4 OF 4
ERP: 1334000058