SUBMINIATURE SOLID STATE LAMP PRELIMINARY SPEC Part Number: AM2520SURC03 Hyper Red Features Description z SUBMINIA TURE PACKAGE. The Hyper Red source color devices are made with In- z WIDE VIEWING ANGLE. GaAlP on GaAs substrate Light Emitting Diode. z GULL WING LEAD. z LONG LIFE - SOLID STATE RELIABILITY. z LOW PACKAGE PROFILE. z MOISTURE SENSITIVITY LEVEL : LEVEL 3. z PACKAGE : 1000PCS / REEL. z RoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. Specifications are subject to change without notice. 5. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAC3740 REV NO: V.5 DATE: SEP/04/2007 PAGE: 1 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.WANG ERP: 1202000697 Selection Guide Part No. Dice AM2520SURC03 Lens Type Hyper Red (InGaAlP) WATER CLEAR Viewing Angle [1] Iv (mcd) [2] @ 20mA Min. Typ. 2θ1/2 650 1600 20° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength Hyper Red λD [1] Dominant Wavelength Δλ1/2 Max. Units Test Conditions 640 nm IF=20mA Hyper Red 628 nm IF=20mA Spectral Line Half-width Hyper Red 27 nm IF=20mA C Capacitance Hyper Red 45 pF VF=0V;f=1MHz VF [2] Forward Voltage Hyper Red 1.9 2.5 V IF=20mA IR Reverse Current Hyper Red 10 uA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Hyper Red Units Power dissipation 75 mW DC Forward Current 30 mA Peak Forward Current [1] 185 mA 5 V Reverse Voltage Operating Temperature -40°C To +85°C Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAC3740 REV NO: V.5 DATE: SEP/04/2007 PAGE: 2 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.WANG ERP: 1202000697 Hyper Red AM2520SURC03 SPEC NO: DSAC3740 REV NO: V.5 DATE: SEP/04/2007 PAGE: 3 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.WANG ERP: 1202000697 AM2520SURC03 Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Specifications (Units : mm) SPEC NO: DSAC3740 REV NO: V.5 DATE: SEP/04/2007 PAGE: 4 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.WANG ERP: 1202000697 PACKING & LABEL SPECIFICATIONS AM2520SURC03 SPEC NO: DSAC3740 REV NO: V.5 DATE: SEP/04/2007 PAGE: 5 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.WANG ERP: 1202000697