100mm (4.0INCH) SINGLE DIGIT NUMERIC DISPLAY Part Number: SA40-19GWA Green Features Description z Large size. The Green source color devices are made with Gallium z 4.0 inch digit height. Phosphide Green Light Emitting Diode. z Low current operation. z Excellent character appearance. z High light output. z Easy mounting on P.C. boards or sockets. z Mechanically rugged. z Standard : gray face, white segment. z RoHS compliant. Package Dimensions& Internal Circuit Diagram Notes: 1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01")unless otherwise noted. 2. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. SPEC NO: DSAD2345 REV NO: V.9 DATE: MAR/04/2011 PAGE: 1 OF 7 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: J.Yu ERP: 1301000448 Selection Guide Part No. Dice SA40-19GWA Iv (ucd) [1] @ 10mA Lens Type Green (GaP) White Diffused Min. Typ. 14000 36000 Description Common Cathode, Rt. Hand Decimal. Note: 1. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength Green λD [1] Dominant Wavelength Δλ1/2 Max. Units Test Conditions 565 nm IF=20mA Green 568 nm IF=20mA Spectral Line Half-width Green 30 nm IF=20mA C Capacitance Green 15 pF VF=0V;f=1MHz VF [2] Forward Voltage Per Segment Or (DP) Green 8.8 (4.4) 10.0 (5.0) V IF=20mA IR Reverse Current Per Segment Or (DP) Green 20 (10) uA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Green Units Power dissipation Per Segment Or (DP) 500 (125) mW DC Forward Current Per Segment Or (DP) 50 (25) mA Peak Forward Current [1] Per Segment Or (DP) 280 (140) mA 5 V Reverse Voltage Per Segment Or (DP) Operating / Storage Temperature Lead Solder Temperature[2] -40°C To +85°C 260°C For 3-5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. SPEC NO: DSAD2345 REV NO: V.9 DATE: MAR/04/2011 PAGE: 2 OF 7 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: J.Yu ERP: 1301000448 Green SA40-19GWA SPEC NO: DSAD2345 REV NO: V.9 DATE: MAR/04/2011 PAGE: 3 OF 7 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: J.Yu ERP: 1301000448 SPEC NO: DSAD2345 REV NO: V.9 DATE: MAR/04/2011 PAGE: 4 OF 7 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: J.Yu ERP: 1301000448 PACKING & LABEL SPECIFICATIONS SA40-19GWA SPEC NO: DSAD2345 REV NO: V.9 DATE: MAR/04/2011 PAGE: 5 OF 7 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: J.Yu ERP: 1301000448 SPEC NO: DSAD2345 REV NO: V.9 DATE: MAR/04/2011 PAGE: 6 OF 7 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: J.Yu ERP: 1301000448 SPEC NO: DSAD2345 REV NO: V.9 DATE: MAR/04/2011 PAGE: 7 OF 7 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: J.Yu ERP: 1301000448