56.9mm (2.3INCH) SINGLE DIGIT NUMERIC DISPLAY Part Number: SA23-11GWA Green Features Description z 2.3 INCH DIGIT HEIGHT. The Green source color devices are made with Gallium z LOW CURRENT OPERATION. Phosphide Green Light Emitting Diode. z EXCELLENT CHARACTER APPEARANCE. z HIGH LIGHT OUTPUT. z EASY MOUNTING ON P.C. BOARDS OR SOCKETS. z MULTICOLOR AVAILABLE. z MECHANICALLY RUGGED. z STANDARD : GRAY FACE, WHITE SEGMENT. z RoHS COMPLIANT. Package Dimensions& Internal Circuit Diagram Notes: 1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01")unless otherwise noted. 2. Specifications are subject to change without notice. SPEC NO: DSAD2324 REV NO: V.9 DATE: JUN/04/2007 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Y.L.LI PAGE: 1 OF 5 ERP: 1301000222 Selection Guide Part No. Dice SA23-11GWA Iv (ucd) [1] @ 10mA Lens Type Green (GaP) WHITE DIFFUSED Min. Typ. 12000 53000 Description Common Anode, Rt. Hand Decimal Note: 1. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength Green λD [1] Dominant Wavelength Δλ1/2 Max. Units Test Conditions 565 nm IF=20mA Green 568 nm IF=20mA Spectral Line Half-width Green 30 nm IF=20mA C Capacitance Green 15 pF VF=0V;f=1MHz VF [2] Forward Voltage Per Segment Or (DP) Green 8.8 (4.4) 10.0 (5.0) V IF=20mA IR Reverse Current Per Segment Or (DP) Green 10 (10) uA VR=20V (VR=10V) Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Green Units Power dissipation Per Segment Or (DP) 250 (125) mW DC Forward Current Per Segment Or (DP) 25 (25) mA Peak Forward Current [1] Per Segment Or (DP) 140 (140) mA Reverse Voltage Per Segment Or (DP) 20 (10) V Operating / Storage Temperature Lead Solder Temperature[2] -40°C To +85°C 260°C For 3-5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. SPEC NO: DSAD2324 REV NO: V.9 DATE: JUN/04/2007 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Y.L.LI PAGE: 2 OF 5 ERP: 1301000222 Green SA23-11GWA SPEC NO: DSAD2324 REV NO: V.9 DATE: JUN/04/2007 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Y.L.LI PAGE: 3 OF 5 ERP: 1301000222 SPEC NO: DSAD2324 REV NO: V.9 DATE: JUN/04/2007 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Y.L.LI PAGE: 4 OF 5 ERP: 1301000222 PACKING & LABEL SPECIFICATIONS SA23-11GWA SPEC NO: DSAD2324 REV NO: V.9 DATE: JUN/04/2007 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Y.L.LI PAGE: 5 OF 5 ERP: 1301000222