57mm (2.3INCH) SINGLE DIGIT NUMERIC DISPLAY Part Number: SA23-11EWA High Efficiency Red Features Description z 2.3 inch digit height. The High Efficiency Red source color devices are made with z Low current operation. Gallium Arsenide Phosphide on Gallium Phosphide Orange z Excellent character appearance. Light Emitting Diode. z High light output. z Easy mounting on P.C. boards or sockets. z Multicolor available. z Mechanically rugged. z Standard : gray face, white segment. z RoHS compliant. Package Dimensions& Internal Circuit Diagram Notes: 1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01")unless otherwise noted. 2. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. SPEC NO: DSAN0647 REV NO: V.1A DATE: JUN/24/2013 PAGE: 1 OF 7 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Q.M.Chen ERP: 1301000220 Selection Guide Part No. Dice Lens Type High Efficiency Red (GaAsP/GaP) SA23-11EWA White Diffused Iv (ucd) [1] @ 10mA Min. Typ. 31000 57000 *9000 *17000 Description Common Anode, Rt. Hand Decimal Notes: 1. Luminous intensity/ luminous Flux: +/-15%. *Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength High Efficiency Red λD [1] Dominant Wavelength Δλ1/2 Max. Units Test Conditions 627 nm IF=20mA High Efficiency Red 617 nm IF=20mA Spectral Line Half-width High Efficiency Red 45 nm IF=20mA C Capacitance High Efficiency Red 15 pF VF=0V;f=1MHz VF [2] Forward Voltage (DP) High Efficiency Red 8 (4.0) 10.0 (5.0) V IF=20mA IR Reverse Current (Per Chip) High Efficiency Red 10 (10) uA VR=5V (VR=5V) Notes: 1.Wavelength: +/-1nm. 2.Forward Voltage: +/-0.1V. 3.Wavelength value is traceable to the CIE127-2007 compliant national standards. Absolute Maximum Ratings at TA=25°C Parameter High Efficiency Red Units Power dissipation (DP) 300 (150) mW DC Forward Current (DP) 30 (30) mA Peak Forward Current [1] (DP) 160 (160) mA 5 (5) V Reverse Voltage (Per Chip) Operating / Storage Temperature Lead Solder Temperature[2] -40°C To +85°C 260°C For 3-5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. SPEC NO: DSAN0647 REV NO: V.1A DATE: JUN/24/2013 PAGE: 2 OF 7 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Q.M.Chen ERP: 1301000220 High Efficiency Red SA23-11EWA SPEC NO: DSAN0647 REV NO: V.1A DATE: JUN/24/2013 PAGE: 3 OF 7 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Q.M.Chen ERP: 1301000220 SPEC NO: DSAN0647 REV NO: V.1A DATE: JUN/24/2013 PAGE: 4 OF 7 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Q.M.Chen ERP: 1301000220 PACKING & LABEL SPECIFICATIONS SA23-11EWA SPEC NO: DSAN0647 REV NO: V.1A DATE: JUN/24/2013 PAGE: 5 OF 7 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Q.M.Chen ERP: 1301000220 SPEC NO: DSAN0647 REV NO: V.1A DATE: JUN/24/2013 PAGE: 6 OF 7 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Q.M.Chen ERP: 1301000220 All design applications should refer to Kingbright application notes available at http://www.KingbrightUSA.com/ApplicationNotes SPEC NO: DSAN0647 REV NO: V.1A DATE: JUN/24/2013 PAGE: 7 OF 7 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Q.M.Chen ERP: 1301000220