8.89mmx8.89mm LED LIGHT BAR Part Number: KB2655EW High Efficiency Red Features Description z Uniform light emitting area. The High Efficiency Red source color devices are made with z Low current operation. Gallium Arsenide Phosphide on Gallium Phosphide Orange z Easily mounted on P.C. boards. Light Emitting Diode. z Flush mountable. z Excellent on/off contrast. z Can be used with panels and legend mounts. z RoHS compliant. Package Dimensions& Internal Circuit Diagram Notes: 1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01")unless otherwise noted. 2. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. SPEC NO: DSAD1450 REV NO: V.7A DATE: OCT/27/2012 PAGE: 1 OF 6 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: C.H.Han ERP: 1334000134 Selection Guide Part No. Dice KB2655EW Iv (mcd) [1] @ 20mA Lens Type High Efficiency Red (GaAsP/GaP) Min. Typ. 40 70 *8 *21 White Diffused Notes: 1. Luminous intensity/ luminous Flux: +/-15%. * Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength High Efficiency Red 627 λD [1] Dominant Wavelength High Efficiency Red 625 Δλ1/2 Spectral Line Half-width High Efficiency Red C Capacitance VF [2] IR Max. Units Test Conditions *627 nm IF=20mA *617 nm IF=20mA 45 nm IF=20mA High Efficiency Red 15 pF VF=0V;f=1MHz Forward Voltage High Efficiency Red 2.0 2.5 V IF=20mA Reverse Current High Efficiency Red 10 uA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. * Wavelength value is traceable to the CIE127-2007 compliant national standards. Absolute Maximum Ratings at TA=25°C Parameter High Efficiency Red Units Power dissipation 75 mW DC Forward Current 30 mA Peak Forward Current [1] 160 mA 5 V Reverse Voltage Operating / Storage Temperature Lead Solder Temperature[2] -40°C To +85°C 260°C For 3-5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. SPEC NO: DSAD1450 REV NO: V.7A DATE: OCT/27/2012 PAGE: 2 OF 6 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: C.H.Han ERP: 1334000134 High Efficiency Red KB2655EW SPEC NO: DSAD1450 REV NO: V.7A DATE: OCT/27/2012 PAGE: 3 OF 6 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: C.H.Han ERP: 1334000134 PACKING & LABEL SPECIFICATIONS KB2655EW SPEC NO: DSAD1450 REV NO: V.7A DATE: OCT/27/2012 PAGE: 4 OF 6 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: C.H.Han ERP: 1334000134 SPEC NO: DSAD1450 REV NO: V.7A DATE: OCT/27/2012 PAGE: 5 OF 6 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: C.H.Han ERP: 1334000134 All design applications should refer to Kingbright application notes available at http://www.KingbrightUSA.com/ApplicationNotes SPEC NO: DSAD1450 REV NO: V.7A DATE: OCT/27/2012 PAGE: 6 OF 6 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: C.H.Han ERP: 1334000134