GLASS PASSIVATED RECTIFIER 16A05C THRU 16A10C VOLTAGE RANGE 50 to 1000 Volts CURRENT 16.0 Ampere FEATURES • • • • • • • TO-220AB Glass passivated chip junction Low power loss, high efficiency Low leakage High current capacity, high surge capacity High temperature soldering guaranteed 200℃/10 second, 0.16″(4.06mm) lead length from case Also available in isolated package under part number 16AF05C MECHANICAL DATA • • • • • • Case: Transfer molded plastic Epoxy: UL94V-0 rate flame retardant Polarity: Marked on package Lead: Plated axial lead, solderable per MIL-STD-202E Method 208C Mounting position: Any Weight: 0.064 ounce, 1.81 gram Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS • • • Ratings at 25℃ ambient temperature unless otherwise specified Single Phase, half wave, 60Hz, resistive or inductive load For capacitive load derate current by 20% SYMBOLS 16A05C 16A1C Maximum Repetitive Peak Reverse Voltage VRRM 50 100 Maximum RMS Voltage VRMS 35 70 Maximum DC Blocking Voltage VDC 50 100 Maximum Average Forward Rectified Current At Tc=100℃ Peak Forward Surge Current 8.3ms single half sine wave superimposed on rated load (JEDEC method) 16A2C 200 140 200 16A4C 400 280 400 16A6C 600 420 600 16A8C 16A10C 800 1000 560 700 800 1000 UNIT Volts Volts Volts I(AV) 16.0 Amps IFSM 175 Amps Maximum Instantaneous Forward Voltage at 8.0A VF IR 1.1 10 300 Volts Maximum DC Reverse Current at rated TA = 25℃ DC Blocking Voltage per element TA = 125℃ CJ 55 pF RθJC TJ TSTG 2.5 (-55 to +150) (-55 to +150) ℃/W Typical Junction Capacitance (Measured at 1.0MHz and applied reverse voltage of 4.0V) Typical Thermal Resistance (NOTE 1) Operating Junction Temperature Range Storage Temperature Range Notes: 1. Unit mounted on heatsink Web Site: www.hkmic.com µA ℃ ℃ GLASS PASSIVATED RECTIFIER HER1601C THRU HER1607C VOLTAGE RANGE 50 to 1000 Volts CURRENT 16.0 Ampere RATING AND CHRACTERISTIC CURVES 16A05C THRU 16A10C FIG.2-MAXIMUM NON-REPETITIVE PEAK FIG.1-TYPICAL FORWARD CURRENT DERATING CURVE FORWARD SURGE CURRENT 15 10 Single Phase Half Wave 60Hz Resistive or Inductive Load 0.375″(9.5mm) Lead Length 200 CURRENT, (A) PEAK FORWARD SURGE AVERAGE FORWARD CURRENT, (A) 20 8.3ms Single Half Sine-Wave (JEDEC Method) T= Tjmax 100 1 Cycle 0 0 50 25 100 75 175 150 125 0 1 2 AMBIENT TEMPERATURE, (° C) 4 6 8 10 40 20 60 100 NUMBER OF CYCLES AT 60 Hz FIG.4-TYPICAL REVERSE CHARACTERISTICS FIG.3-TYPICAL INSTANTANEOUS 1000 10 1.0 TJ =25° C Pulse Width=300us 1% Duty Cycle 100 TJ =125° C (μA) INSTANTANEOUS REVERSE CURRENT, 100 (A) INSTANTANEOUS FORWARD CURRENT, FORWARD CHARACTERISTICS 10 TJ=25° C 1.0 0.1 0.4 0.8 1.2 1.6 INSTANTANEOUS FORWARD VOLTAGE,(V) 0.1 0 20 40 60 80 100 PERCENT OF RATED PEAK FIG.5-TYPICAL JUNCTION CAPACITANCE REVERSE VOLTAGE,(%) JUNCTION CAPACITANCE,(pF) 100 10 T J =25° C f=1MHz Vsig=50mVp-p 1 0.1 1.0 10 100 REVERSE VOLTAGE,(V) Web Site: www.hkmic.com 120 140