GP10A THRU GP10M 1.0 AMP. Glass Passivated Junction Plastic Rectifiers Voltage Range 50 to 1000 Volts Current 1.0 Ampere DO-41 Features High temperature metallurgically bonded construction Plastic material used carries Underwriters Laboratory Classification 94V-O Glass passivated cavity-free junction Capable of meeting environmental standards of MIL-S-19500 1.0 ampere operation at TA=75oC and 55oC with no thermal runaway Typical IR less than 0.1 uA High temperature soldering guaranteed: 350oC / 10 seconds, 0.375”(9.5mm) lead length, 5 lbs. (2.3kg) tension Mechanical Data Case: JEDEC DO-41 molded plastic over glass body Lead: Plated axial leads, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Mounting position: Any Weight: 0.012 ounce, 0.3 gram Dimensions in inches and (millimeters) Maximum Ratings and Electrical Characteristics Rating at 25℃ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% GP Symbol GP Type Number Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current .375”(9.5mm) Lead Length (See Fig. 1) Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method ) VRRM VRMS VDC 10A 10B GP 10D GP 10G GP 10J GP 10K GP 10M 50 35 50 100 70 100 200 140 200 400 280 400 600 420 600 800 1000 560 700 800 1000 Units V V V I(AV) 1.0 A IFSM 30 A Maximum Instantaneous Forward Voltage @1.0A VF Maximum DC Reverse Current @ TA=25℃ at Rated DC Blocking Voltage @ TA=125℃ IR 5.0 50 uA uA Maximum Full Load Reverse Current, Full Cycle Average .375”(9.5mm) Lead Length @TA=75℃ HTIR 30 uA Cj RθJA 10 65 - 65 to + 175 pF ℃/W ℃ Typical Junction Capacitance ( Note 1 ) Typical Thermal Resistance (Note 2) 1.1 1.2 TJ,TSTG Notes: 1. Measured at 1 MHz and Applied Reverse Voltage of 4.0 Volts D.C. 2. Mount on Cu-Pad Size 5mm x 5mm on P.C.B. Operating and Storage Temperature Range - 566 - V RATINGS AND CHARACTERISTIC CURVES (GP10A THRU GP10M) FIG.2- MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT FIG.1- MAXIMUM FORWARD CURRENT DERATING CURVE 30 PEAK FORWARD SURGE CURRENT. (A) AVERAGE FORWARD CURRENT. (A) 1.0 0.8 0.6 0.4 SINGLE PHASE HALF WAVE 60Hz RESISTIVE OR INDUCTIVE LOAD 0.375"(9.5m/m) LEAD LENGTH 0.2 25 Tj=Tj max 8.3ms Single Half Sine Wave JEDEC Method 20 15 10 5 0 0 20 40 60 80 100 120 140 160 1 180 NUMBER OF CYCLES AT 60Hz AMBIENT TEMPERATURE. ( C) FIG.4- TYPICAL REVERSE CHARACTERISTICS FIG.3- TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS -G GP 1 P1 0J Tj=125 0C K 10 -G P1 0M 0.1 INSTANTANEOUS REVERSE CURRENT. ( A) GP A 10 10 1 Tj=75 0C 0.1 0.01 Tj=25 0C 0 Tj=25 C PULSE WIDTH-300 S 1% DUTY CYCLE 0.01 0.4 0.6 0.8 1.0 1.2 1.4 0.001 0 1.6 FORWARD VOLTAGE. (V) 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE. (%) FIG.5- TYPICAL JUNCTION CAPACITANCE 20 JUNCTION CAPACITANCE.(pF) INSTANTANEOUS FORWARD CURRENT. (A) 10 100 10 o Tj=25 0C f=1.0MHz Vsig=50mVp-p 10 8 6 4 2 1 0.1 0.4 1 4 REVERSE VOLTAGE. (V) - 567 - 10 40 100